05236 EM4D-100L Only One Name Means ProTek’Tion™ EMI FILTER/TVS ARRAY APPLICATIONS Integrated I/O Protection & Filtering Solutions For: ✔ Cellular Phones ✔ Color LCD Display Panel ✔ Notebooks ✔ Personal Digital Assistant (PDA) ✔ Ground Positioning System (GPS) ✔ SMART Cards IEC COMPATIBILITY (EN61000-4) DFN-8 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ ESD Protection > 25 kilovolts ✔ EMI Filtering/TVS Low Pass Filters ✔ > 25db Attenuation from 800MHz to 3GHz ✔ Protects Up to Four(4) Data Lines ✔ RoHS Compliant in Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ DFN-8 Package ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ Device Marking: Marking Code ✔ 8mm Tape and Reel Per EIA Standard 481 PIN CONFIGURATION 1 For Each Line I/On 2 3 4 100 Ohm I/On GND 10pF 10pF GND 8 7 6 5 BOTTOM VIEW Note: I/O connected from pins 1-8, 2-7, 3-6 and 4-5. 05236.R3 1/06 1 www.protekdevices.com EM4D-100L DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -40°C to 85°C °C TSTG -55°C to 150°C °C DC Power Per Resistor P 400 mW Typical Resistance @ ± 20% R 100 OHMS Soldering Temperature for 10 seconds TL 265°C °C PARAMETER Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER EM4D-100L DEVICE MARKING M4D10L RATED STAND-OFF VOLTAGE MINIMUM BREAKDOWN VOLTAGE MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION CUT-OFF FREQUENCY (50 OHMS I/O) ZERO BIAS TYPICAL CAPACITANCE PER LINE (See Note 1) VWM VOLTS @ 1mA V(BR) VOLTS @ 3V ID µA @10mA VF VOLTS @ 800-3000 MHz dB fc MHz @2.5V, 1MHz C pF 5.0 6.0 0.1 0.8 25 150 20 Note 1: 30pF @ 0V, 1MHz, ±20% tolerance. 0 FIGURE 1 TYPICAL FILTER PERFORMANCE (TA = 25C, DC BIAS = 0V, 50OHM ENVIRONMENT) Insertion Loss - dB -10 -20 -30 -40 1 05236.R3 1/06 10 100 Frequency - MHz 2 1000 10000 www.protekdevices.com EM4D-100L GRAPHS FIGURE 2 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) Normalized Resistance 1.100 1.060 1.020 0.980 0.940 0.900 -40 -20 0 20 40 Temperature °C 60 80 100 FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25°C) 1.6 Cj - Capacitance (Normalized) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts FIGURE 4 OVERSHOOT & CLAMPING VOLTAGE 5 Volts per Division 35 25 15 5 -5 ESD Test Pulse: +15 kilovolt, 1/30ns (waveform) 05236.R3 1/06 3 www.protekdevices.com EM4D-100L PACKAGE OUTLINE & DIMENSIONS PACKAGE DIMENSIONS PACKAGE OUTLINE MILLIMETERS INCHES DIM MIN MAX MIN MAX D E Pin 1 Reference TOP VIEW A3 A3 0.80 0.90 0.031 0.035 0.00 0.05 0.00 0.002 A3 0.178 0.228 0.007 0.009 b 0.20 0.30 0.008 0.012 D 1.95 2.05 0.077 0.081 D2 1.50 1.50 0.059 0.059 E 1.95 2.05 0.077 0.081 E2 0.55 0.65 0.022 0.026 e 0.50 0.50 0.020 0.020 K 1.20 1.21 0.047 0.048 L 0.30 0.40 0.012 0.016 NOTES: 1. Controlling dimensions in millimeters 2. Dimension b applies to terminal and is measured between 0.25 and 0.30mm from terminal. 3. Coplanarity applies to the exposed pad as well as the terminals. A SIDE VIEW A1 D2 TAPE & REEL ORDERING NOMENCLATURE L e 1 A A1 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T71 = 7 Inch Reel - 1,000 pieces per 8mm tape, i.e., EM4D-100L-T71. 3. Suffix-T73 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., EM4D-100L-T73. 4. Suffix - LF = Lead-Free, Pure Tin Plating, i.e., EM4D-100L-LF-T73. 4 E2 5 8 K b BOTTOM VIEW Outline & Dimensions: Rev 0 - 12/04, 06057 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05236.R3 1/06 4 www.protekdevices.com