05217 EM8Q-100 Only One Name Means ProTek’Tion™ LCD - EMI FILTER/TVS ARRAY APPLICATIONS ✔ LCD Displays ✔ Cellular Phones ✔ Notebooks ✔ Personal Digital Assistant (PDA) ✔ Ground Positioning System (GPS) ✔ SMART Cards IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns QFN-16 FEATURES L3 L4 L5 L6 16 15 14 13 3 4 L1 L2 L7 L8 L8 L7 12 11 10 9 1 2 L2 L1 ✔ ESD Protection > 25 kilovolts ✔ Bidirectional EMI Filtering/TVS Low Pass Filters ✔ Low Insertion Loss: -3db Roll-Off @ 150MHz ✔ Protects Up to Eight(8) Data Lines ✔ RoHS Compliant on Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ QFN-16 Package Weight 0.73 milligrams (Approximate) Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ Marking: Logo, Part Number and Pin One Defined By Dot on Package 5 6 7 8 L3 L4 L5 L6 16 PIN QFN PACKAGE 3mm X 3mm PIN CONFIGURATION I/O 1 I/O 2 Pin 2 D1 R1 I/O 3 Pin 1 R2 I/O 4 Pin 16 R3 Pin 15 R4 D2 Pin 3 I/O 5 Pin 4 I/O 6 Pin 14 D1 R5 Pin 5 I/O 7 Pin 13 R6 Pin 6 I/O 8 Pin 12 R7 Pin 11 R8 D2 Pin 7 05217.R3 6/05 Pin 8 Pin 9 1 Pin 10 Note: Center Tab as the Ground. www.protekdevices.com EM8Q-100 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -40°C to 85°C °C TSTG -55°C to 150°C °C DC Power Per Resistor P 100 mW Typical Resistance @ ± 15% R 100 OHMS Soldering Temperature for 10 seconds TL 265 °C °C PARAMETER Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER RATED MINIMUM STAND-OFF BREAKDOWN VOLTAGE VOLTAGE EM8Q-100 MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION CUT-OFF TYPICAL FREQUENCY CAPACITANCE (50 Ohms I/O PER LINE ZERO BIAS) (See Note 1) VWM VOLTS @ 1mA V(BR) VOLTS @ 3V ID µA @10mA VF VOLTS @ 800-3000 MHz dB fc MHz @2.5V, 1 MHz C pF 5.0 6.0 0.1 0.8 25 150 20 Note 1: ±20% tolerance. 05217.R3 6/05 2 www.protekdevices.com EM8Q-100 GRAPHS FIGURE 1 TYPICAL INSERTION LOSS (TA = 25°C, DC BIAS = 0V, 50OHM ENVIRONMENT) 0 Insertion Loss - (dB) -5 -10 -15 -20 -25 -30 -35 0.1 1 10 100 1000 10000 Frequency (MHz) FIGURE 2 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) Normalized Resistance 1.100 1.060 1.020 0.980 0.940 0.900 -40 05217.R3 6/05 -20 0 20 40 Temperature °C 3 60 80 100 www.protekdevices.com EM8Q-100 PACKAGE OUTLINE & DIMENSIONS PACKAGE DIMENSIONS PACKAGE OUTLINE C Pin 1 Identified by Dot A F D E Chamfer 0.300 x 45 B G CL TOP VIEW SIDE VIEW 4.000 0.700 1.000 0.500 0.300 0.1181 SQ 0.0610 SQ ± 0.002 0.059 0.0196 BSC 0.009 ± 0.002 0.0157 ± 0.002 0.0295 ± 0.002 0.000 - 0.002 0.0079 ± 0.001 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reels - 3,000 pieces per 12mm tape, i.e., EM8Q-100-T7. 3. Suffix-T13 = 13 Inch Reels - 5,000 pieces per 12mm tape, i.e., EM8Q-100-T13. 4. Suffix-LF = Pure Tin Plating,i.e, EM8Q-100-LF-T7. TYPICAL 1 2 3 4 5 INCHES 3.000 SQ 1.550 SQ ± 0.050 1.500 0.500 BSC 0.230 ± 0.05 0.400 ± 0.05 0.750 ± 0.05 0.000 - 0.05 0.203 ± 0.025 TAPE & REEL ORDERING NOMENCLATURE MOUNTING PAD DIM Millimeters MILLIMETERS A B C D E F G H I NOTES: 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad and outline: .xxx ± 0.05mm (± 0.002”). I H DIM Inches 0.1574 0.0275 0.0393 0.0196 0.0118 2 1 3 5 4 Outline & Dimensions: Rev 0 - 7/04, 06054 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”)/330mm(13”) 12mm A0 B0 K0 D E F W P0 P2 P 3.30± 0.10 3.30± 0.10 1.00 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 5.50 ± 0.10 12.00 ±0.30 4.00 ±0.10 2.00 ±0.05 8.00 ±0.10 P0 P2 D t tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05217.R3 6/05 4 www.protekdevices.com