05216 EM10Q-200 Only One Name Means ProTek’Tion™ LCD - EMI FILTER/TVS ARRAY APPLICATIONS L4 L5 L6 L7 L8 20 19 18 17 16 IEC COMPATIBILITY (EN61000-4) L9 L10 L10 L9 L 8 15 14 13 12 11 1 2 3 4 5 L3 L2 L1 L1 L2 ✔ LCD Displays ✔ Cellular Phones ✔ Notebooks ✔ Personal Digital Assistant (PDA) ✔ Ground Positioning System (GPS) ✔ SMART Cards 6 7 8 9 10 L3 L4 L5 L6 L7 20 PIN QFN PACKAGE 3.5mm X 3.5mm ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns FEATURES ✔ ESD Protection > 25 kilovolts ✔ Bidirectional EMI Filtering/TVS Low Pass Filters ✔ Low Insertion Loss: -3db Roll-Off @ 140MHz ✔ Protects Up to Ten(10) Data Lines ✔ RoHS Compliant on Lead-Free Versions MECHANICAL CHARACTERISTICS ✔ QFN-20 Package ✔ Available in Tin-Lead or Lead-Free Pure-Tin Plating(Annealed) ✔ Solder Reflow Temperature: Tin-Lead - Sn/Pb, 85/15: 240-245°C Pure-Tin - Sn, 100: 260-270°C ✔ Flammability rating UL 94V-0 ✔ Marking: Logo, Marking Code and Pin One Defined By Dot on Package PIN CONFIGURATION I/O 1 I/O 2 Pin 3 D1 R1 I/O 3 Pin 2 R2 I/O 4 Pin 1 R3 I/O 5 Pin 20 R4 Pin 19 R5 D2 Pin 5 Pin 4 I/O 6 I/O 7 Pin 18 D1 R6 Pin 6 I/O 8 Pin 17 R7 Pin 7 I/O 9 Pin 16 R8 Pin 15 R9 Pin 8 I/O 10 Pin 14 R10 D2 Pin 9 Pin 10 Pin 11 Pin 12 Pin 13 Note: Center Tab as the Ground. 05216.R1 3/05 1 www.protekdevices.com EM10Q-200 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -40°C to 85°C °C TSTG -55°C to 150°C °C DC Power Per Resistor P 100 mW Typical Resistance @ ± 15% R 200 OHMS Soldering Temperature for 10 seconds TL 265°C °C PARAMETER Operating Temperature Storage Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER RATED MINIMUM STAND-OFF BREAKDOWN VOLTAGE VOLTAGE EM10Q-200 MAXIMUM REVERSE LEAKAGE CURRENT TYPICAL FORWARD VOLTAGE MINIMUM ATTENUATION CUT-OFF TYPICAL FREQUENCY CAPACITANCE (50 Ohms I/O PER LINE ZERO BIAS) (See Note 1) VWM VOLTS @ 1mA V(BR) VOLTS @ 3V ID µA @10mA VF VOLTS @ 800-3000 MHz dB fc MHz @2.5V, 1 MHz C pF 5.0 6.0 0.1 0.8 25 140 20 Note 1: ±20% tolerance. FIGURE 1 TYPICAL INSERTION LOSS (TA = 25°C, DC BIAS = 0V, 50OHM ENVIRONMENT) 0 Insertion Loss - (dB) -5 -10 -15 -20 -25 -30 -35 0.1 1 10 100 1000 10000 Frequency (MHz) 05216.R1 3/05 2 www.protekdevices.com EM10Q-200 GRAPHS FIGURE 2 RESISTANCE VS TEMPERATURE (Normalized to Resistance at 25°C) 1.220 Normalized Resistance 1.080 1.040 1.000 0.960 0.920 0.880 -40 -20 20 40 Temperature °C 60 80 100 FIGURE 3 CAPACITANCE VS REVERSE VOLTAGE (Normalized to Capacitance at 2.5V DC & 25°C) 1.6 Cj - Capacitance (Normalized) 0 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 1 2 3 4 5 6 VR - Reverse Voltage - Volts 05216.R1 3/05 3 www.protekdevices.com EM10Q-200 PACKAGE OUTLINE & DIMENSIONS PACKAGE DIMENSIONS PACKAGE OUTLINE Pin 1 Identified by Dot A D E DIM F Chamfer 0.300 x 45 B G TOP VIEW H SIDE VIEW MOUNTING PAD 1 2 3 4 5 4.500 0.820 1.000 0.500 0.310 INCHES A 3.500 SQ ± 0.050 0.1377 SQ ± 0.0019 B 1.830 SQ ± 0.050 0.0720 SQ ± 0.0019 D 0.510 BSC 0.020 BSC E 0.250 ± 0.05 0.0098 ± 0.0019 F 0.450 ± 0.05 0.0177 ± 0.0019 G 0.760 ± 0.05 0.0299 ± 0.0019 H 0.000 - 0.05 0.000 - 0.0019 I 0.203 ± 0.025 0.0079 ± 0.0009 NOTES: 1. Controlling dimensions in inches. 2. Decimal tolerances for mounting pad and outline: .xxx ± 0.05mm (± 0.002”). TAPE & REEL ORDERING NOMENCLATURE 1. Surface mount product is taped and reeled in accordance with EIA 481. 2. Suffix-T7 = 7 Inch Reels - 1,000 pieces per 8mm tape, i.e., EM10Q-200-T7. 3. Suffix-T13 = 13 Inch Reels - 3,000 pieces per 8mm tape, i.e., EM10Q-200-T13. 4. Suffix-LF = Lead-Free, Pure Tin Plating, i.e, EM10Q-200-LF-T7. TYPICAL DIM Millimeters I MILLIMETERS Inches 0.1771 0.0322 0.0393 0.0200 0.0122 2 1 3 5 4 Outline & Dimensions: Rev 0 - 3/04, 06053 COPYRIGHT © ProTek Devices 2005 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05216.R1 3/05 4 www.protekdevices.com