Revised January 2004 CD4020BC • CD4040BC • CD4060BC 14-Stage Ripple Carry Binary Counters • 12-Stage Ripple Carry Binary Counters • 14-Stage Ripple Carry Binary Counters General Description Features The CD4020BC, CD4060BC are 14-stage ripple carry binary counters, and the CD4040BC is a 12-stage ripple carry binary counter. The counters are advanced one count on the negative transition of each clock pulse. The counters are reset to the zero state by a logical “1” at the reset input independent of clock. ■ Wide supply voltage range: 3.0V to 15V ■ High noise immunity: 0.45 VDD (typ.) ■ Low power TTL compatibility: or 1 driving 74LS Fan out of 2 driving 74L ■ Medium speed operation: 8 MHz typ. at VDD = 10V ■ Schmitt trigger clock input Ordering Code: Order Number CD4020BCM Package Number Package Description M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD4020BCN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide CD4040BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD4040BCN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide CD4060BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow CD4060BCN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagrams Pin Assignments for DIP and SOIC CD4020BC Pin Assignments for DIP and SOIC CD4040BC Top View Top View © 2004 Fairchild Semiconductor Corporation DS005953 www.fairchildsemi.com CD4020BC • CD4040BC • CD4060BC 14-Stage Ripple Carry Binary Counters • 12-Stage Ripple Carry Binary Counters • 14-Stage Ripple Carry Binary Counters October 1987 CD4020BC • CD4040BC • CD4060BC Connection Diagrams (Continued) Pin Assignments for DIP and SOIC CD4060BC Top View Schematic Diagrams CD4020BC CD4040BC www.fairchildsemi.com 2 CD4020BC • CD4040BC • CD4060BC Schematic Diagrams (Continued) CD4060BC CD4060B Typical Oscillator Connections RC Oscillator Crystal Oscillator 3 www.fairchildsemi.com CD4020BC • CD4040BC • CD4060BC Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 2) Supply Voltage (VDD ) Input Voltage (VIN) Storage Temperature Range (TS) −0.5V to +18V +3V to +15V Supply Voltage (VDD) −0.5V to VDD +0.5V Input Voltage (VIN) −65°C to +150 °C 0V to VDD Operating Temperature Range (TA) −55°C to +125°C Package Dissipation (PD) Dual-In-Line 700 mW Small Outline 500 mW Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices should be operated at these limits. The tables of “Recommended Operating Conditions” and “Electrical Characteristics” provide conditions for actual device operation. Lead Temperature (TL) 260 °C (Soldering, 10 seconds) Note 2: VSS = 0V unless otherwise specified. DC Electrical Characteristics (Note 2) Symbol IDD VOL VOH VIL VIH IOL IOH IIN Parameter Quiescent Device Current LOW Level Output Voltage HIGH Level Output Voltage LOW Level Input Voltage −55°C Conditions Min +25°C Max Min Typ +125°C Max Min VDD = 5V, VIN = VDD or VSS 5 5 150 VDD = 10V, VIN = V DD or VSS 10 10 300 VDD = 15V, VIN = V DD or VSS 20 20 600 VDD = 5V 0.05 0 0.05 0.05 VDD = 10V 0.05 0 0.05 0.05 VDD = 15V 0.05 0 0.05 0.05 VDD = 5V 4.95 4.95 5 4.95 VDD = 10V 9.95 9.95 10 9.95 VDD = 15V 14.95 14.95 15 14.95 1.5 2 1.5 1.5 VDD = 10V, VO = 1.0V or 9.0V 3.0 4 3.0 3.0 VDD = 15V, VO = 1.5V or 13.5V 4.0 6 4.0 4.0 3.5 3.5 3 3.5 VDD = 10V, VO = 1.0V or 9.0V 7.0 7.0 6 7.0 VDD = 15V, VO = 1.5V or 13.5V 11.0 11.0 9 11.0 LOW Level Output Current VDD = 5V, VO = 0.4V 0.64 0.51 0.88 0.36 (Note 3) VDD = 10V, VO = 0.5V 1.6 1.3 2.25 0.9 VDD = 15V, VO = 1.5V 4.2 3.4 8.8 2.4 HIGH Level Output Current VDD = 5V, VO = 4.6V −0.64 −0.51 −0.88 −0.36 (Note 3) VDD = 10V, VO = 9.5V −1.6 −1.3 −2.25 −0.9 VDD = 15V, VO = 13.5V −4.2 −3.4 −8.8 −2.4 Input Current www.fairchildsemi.com V V mA mA −0.1 −10−5 −0.1 −1.0 VDD = 15V, VIN = 15V 0.1 10−5 0.1 1.0 4 µA V VDD = 15V, VIN = 0V Note 3: Data does not apply to oscillator points φ0 and φ0 of CD4060BC. I OH and IOL are tested one output at a time. Units V VDD = 5V, VO = 0.5V or 4.5V VDD = 5V, VO = 0.5V or 4.5V HIGH Level Input Voltage Max µA (Note 4) CD4020BC, CD4040BC TA = 25°C, CL = 50 pF, RL = 200k, tr = tf = 20 ns, unless otherwise noted Symbol tPHL1, tPLH1 tPHL, tPLH tTHL, tTLH tWL, tWH trCL, tfCL fCL tPHL(R) tWH(R) Parameter Propagation Delay Time to Q1 Typ Max VDD = 5V Conditions Min 250 550 VDD = 10V 100 210 VDD = 15V 75 150 Interstage Propagation Delay Time VDD = 5V 150 330 from Qn to Qn+1 VDD = 10V 60 125 VDD = 15V 45 90 VDD = 5V 100 200 VDD = 10V 50 100 VDD = 15V 40 80 VDD = 5V 125 335 VDD = 10V 50 125 VDD = 15V 40 100 Transition Time Minimum Clock Pulse Width Maximum Clock Rise and Fall Time VDD = 5V Maximum Clock Frequency Reset Propagation Delay Minimum Reset Pulse Width CIN Average Input Capacitance CPD Power Dissipation Capacitance Units ns ns ns ns No Limit VDD = 10V No Limit VDD = 15V No Limit VDD = 5V 1.5 4 VDD = 10V 4 10 VDD = 15V 5 12 MHz VDD = 5V 200 450 VDD = 10V 100 210 VDD = 15V 80 170 VDD = 5V 200 450 VDD = 10V 100 210 VDD = 15V 80 170 5 7.5 Any Input 50 ns ns ns pF pF Note 4: AC Parameters are guaranteed by DC correlated testing. 5 www.fairchildsemi.com CD4020BC • CD4040BC • CD4060BC AC Electrical Characteristics CD4020BC • CD4040BC • CD4060BC AC Electrical Characteristics (Note 5) CD4060BC TA = 25°C, CL = 50 pF, RL = 200k, tr = tf = 20 ns, unless otherwise noted Symbol Parameter tPHL4, tPLH4 Propagation Delay Time to Q4 tPHL, tPLH tTHL, tTLH Conditions Min Max 550 1300 VDD = 10V 250 525 VDD = 15V 200 400 Interstage Propagation Delay Time VDD = 5V 150 330 from Qn to Qn+1 VDD = 10V 60 125 VDD = 15V 45 90 VDD = 5V 100 200 VDD = 10V 50 100 VDD = 15V 40 80 Transition Time tWL, tWH Typ VDD = 5V Minimum Clock Pulse Width VDD = 5V 170 500 VDD = 10V 65 170 VDD = 15V 50 125 Maximum Clock Rise and Fall Time VDD = 5V trCL, tfCL fCL Maximum Clock Frequency tPHL(R) Reset Propagation Delay tWH(R) Minimum Reset Pulse Width CIN Average Input Capacitance CPD Power Dissipation Capacitance No Limit VDD = 15V No Limit VDD = 5V 1 3 VDD = 10V 3 8 VDD = 15V 4 10 VDD = 5V 200 450 100 210 VDD = 15V 80 170 VDD = 5V 200 450 VDD = 10V 100 210 VDD = 15V 80 170 5 7.5 Any Input 50 RC Oscillator Notes: 2. RC Oscillator applications are not recommended at supply voltages below 7.0V for R1 < 50 kΩ 1 at VCC = 10V www.fairchildsemi.com ns ns ns 6 ns MHz VDD = 10V 1. R2 = 2 R1 to 10 R1 2.2 R1 CX ns No Limit VDD = 10V Note 5: AC Parameters are guaranteed by DC correlated testing. 3. f ≈ Units ns ns pF pF CD4020BC • CD4040BC • CD4060BC Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M16A 7 www.fairchildsemi.com CD4020BC • CD4040BC • CD4060BC 14-Stage Ripple Carry Binary Counters • 12-Stage Ripple Carry Binary Counters • 14-Stage Ripple Carry Binary Counters Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N16E Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 8