Revised January 1999 CD4013BC Dual D-Type Flip-Flop General Description Features The CD4013B dual D-type flip-flop is a monolithic complementary MOS (CMOS) integrated circuit constructed with N- and P-channel enhancement mode transistors. Each flip-flop has independent data, set, reset, and clock inputs and “Q” and “Q” outputs. These devices can be used for shift register applications, and by connecting “Q” output to the data input, for counter and toggle applications. The logic level present at the “D” input is transferred to the Q output during the positive-going transition of the clock pulse. Setting or resetting is independent of the clock and is accomplished by a high level on the set or reset line respectively. ■ Wide supply voltage range: ■ High noise immunity: 3.0V to 15V 0.45 VDD (typ.) ■ Low power TTL: fan out of 2 driving 74L compatibility: or 1 driving 74LS Applications • Automotive • Data terminals • Instrumentation • Medical electronics • Alarm system • Industrial electronics • Remote metering • Computers Ordering Code: Order Number Package Number Package Description CD4013BCM M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow CD4013BCSJ M14D 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide CD4013BCN N14A 14-Lead Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Truth Table Pin Assignments for DIP, SOIC and SOP CL (Note 1) D R S Q Q 0 0 0 0 1 1 0 0 1 0 x 0 0 Q Q x x 1 0 0 1 x x 0 1 1 0 x x 1 1 1 1 No Change x = Don't Care Case Note 1: Level Change Top View © 1999 Fairchild Semiconductor Corporation DS005946.prf www.fairchildsemi.com CD4013BC Dual D-Type Flip-Flop October 1987 CD4013BC Schematic Diagrams Logic Diagram www.fairchildsemi.com 2 Recommended Operating Conditions (Note 3) DC Supply Voltage (VDD) Input Voltage (VIN) −0.5 VDC to +18 VDC Input Voltage (VIN) −65°C to +150°C Storage Temperature Range (TS) 700 mW Small Outline 500 mW Symbol IDD VOL Parameter VIH IOL IIN Min Max +25°C Min Typ +85°C Max Min Max Units VDD = 5V, VIN = VDD or VSS 4.0 4.0 30 VDD = 10V, VIN = VDD or VSS 8.0 8.0 60 µA VDD = 15V, VIN = VDD or VSS 16.0 16.0 120 µA LOW Level HIGH Level µA |IO| < 1.0 µA VDD = 5V 0.05 0.05 0.05 V VDD = 10V 0.05 0.05 0.05 V VDD = 15V 0.05 0.05 0.05 V |IO| < 1.0 µA VDD = 5V 4.95 4.95 4.95 V VDD = 10V 9.95 9.95 9.95 V VDD = 15V 14.95 14.95 14.95 V LOW Level |IO| < 1.0 µA Input Voltage VDD = 5V, VO = 0.5V or 4.5V 1.5 1.5 1.5 VDD = 10V, VO = 1.0V or 9.0V 3.0 3.0 3.0 V VDD = 15V, VO = 1.5V or 13.5V 4.0 4.0 4.0 V V HIGH Level |IO| < 1.0 µA Input Voltage VDD = 5V, VO = 0.5V or 4.5V 3.5 3.5 3.5 V VDD = 10V, VO = 1.0V or 9.0V 7.0 7.0 7.0 V VDD = 15V, VO = 1.5V or 13.5V 11.0 11.0 11.0 V VDD = 5V, VO = 0.4V 0.52 0.44 0.88 0.36 mA LOW Level Output VDD = 10V, VO = 0.5V 1.3 1.1 2.25 0.9 mA VDD = 15V, VO = 1.5V 3.6 3.0 8.8 2.4 mA HIGH Level Output VDD = 5V, VO = 4.6V −0.52 −0.44 −0.88 −0.36 mA Current (Note 4) VDD = 10V, VO = 9.5V −1.3 −1.1 −2.25 −0.9 mA VDD = 15V, VO = 13.5V −3.6 Input Current VDD = 15V, VIN = 0V −0.3 −10−5 −0.3 −1.0 µA VDD = 15V, VIN = 15V 0.3 10−5 0.3 1.0 µA Current (Note 4) IOH −40°C Conditions Current Output Voltage VIL (Note 3) Quiescent Device Output Voltage VOH Note 3: VSS = 0V unless otherwise specified. 260°C DC Electrical Characteristics −40°C to +85°C Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed, they are not meant to imply that the devices should be operated at these limits. The tables of “Recommended Operating Conditions” and “Electrical Characteristics” provide conditions for actual device operation. Lead Temperature (TL) (Soldering, 10 seconds) 0 VDC to VDD VDC Operating Temperature Range (TA) Power Dissipation (PD) Dual-In-Line +3 VDC to +15 VDC DC Supply Voltage (VDD) −0.5 VDC to VDD +0.5 VDC −3.0 −8.8 −2.4 mA Note 4: IOH and IOL are measured one output at a time. 3 www.fairchildsemi.com CD4013BC Absolute Maximum Ratings(Note 2) (Note 3) CD4013BC AC Electrical Characteristics (Note 5) TA = 25°C, CL = 50 pF, RL = 200k, unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CLOCK OPERATION tPHL, tPLH tTHL, tTLH tWL, tWH tRCL, tFCL tSU fCL VDD = 5V 200 350 ns VDD = 10V 80 160 ns VDD = 15V 65 120 ns VDD = 5V 100 200 ns VDD = 10V 50 100 ns VDD = 15V 40 80 ns Minimum Clock VDD = 5V 100 200 ns Pulse Width VDD = 10V 40 80 ns VDD = 15V 32 65 ns Propagation Delay Time Transition Time Maximum Clock Rise and VDD = 5V 15 µs Fall Time VDD = 10V 10 µs VDD = 15V 5 µs Minimum Set-Up Time VDD = 5V 20 40 ns VDD = 10V 15 30 ns VDD = 15V 12 25 ns Maximum Clock VDD = 5V 2.5 5 MHz Frequency VDD = 10V 6.2 12.5 MHz VDD = 15V 7.6 15.5 MHz SET AND RESET OPERATION tPHL(R), Propagation Delay Time tPLH(S) VDD = 5V 150 300 ns VDD = 10V 65 130 ns VDD = 15V 45 90 ns tWH(R), Minimum Set and VDD = 5V 90 180 ns tWH(S) Reset Pulse Width VDD = 10V 40 80 ns VDD = 15V 25 50 ns Any Input 5 7.5 pF CIN Average Input Capacitance Note 5: AC Parameters are guaranteed by DC correlated testing. Switching Time Waveforms www.fairchildsemi.com 4 CD4013BC Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-120, 0.150” Narrow Package Number M14A 14-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M14D 5 www.fairchildsemi.com CD4013BC Dual D-Type Flip-Flop Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Package Number N14A LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.