IL440 Vishay Semiconductors Optocoupler, Phototriac Output, Low Input Current FEATURES • 400 V blocking voltage A 1 6 MT2 C 2 5 NC NC 3 4 MT1 • 5.0 mA maximum trigger current • Isolation test voltage, 5300 VRMS, t = 1.0 s • Isolation materials per UL94 • Pin compatible with optocouplers: - IL440-4 MOC 3021 - IL440-5 MOC 3022 - IL440-6 MOC 3023 i179035 DESCRIPTION • Lead (Pb)-free component The IL440 consists of a GaAs infrared emitter optically coupled to a silicon planar triac chip with a non-zero crossing network. The two semiconductors are assembled in a 6 pin dual-in-line plastic package. The IL440 can handle currents up to 100 mA RMS. • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC APPLICATIONS • High current triac driver • Solid state relay AGENCY APPROVALS • UL1577, file no. E52744 system code H or J, double protection • Switch small AC loads • CSA 93751 • DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending available with option 1 • BAB/BSI IEC 60950; IEC 60065 ORDER INFORMATION PART REMARKS 15 mA IFT, 400 V VDRM, DIP-6 IL440-4 IL440-5 10 mA IFT, 400 V VDRM, DIP-6 IL440-6 5.0 mA IFT, 400 V VDRM, DIP-6 IL440-4X007 15 mA IFT, 400 V VDRM, SMD-6 (option 7) IL440-4X009 15 mA IFT, 400 V VDRM, SMD-6 (option 9) IL440-5X006 10 mA IFT, 400 V VDRM, DIP-6 400 mil (option 6) IL440-5X009 10 mA IFT, 400 V VDRM, SMD-6 (option 9) IL440-6X006 5.0 mA IFT, 400 V VDRM, DIP-6 400 mil (option 6) IL440-6X007 5.0 mA IFT, 400 V VDRM, SMD-6 (option 7) IL440-6X009 5.0 mA IFT, 400 V VDRM, SMD-6 (option 9) Note For additional information on the available options refer to option information. Document Number: 83631 Rev. 1.6, 18-Jan-08 For technical questions, contact: [email protected] www.vishay.com 1 IL440 Vishay Semiconductors Optocoupler, Phototriac Output, Low Input Current ABSOLUTE MAXIMUM RATINGS (1) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT VR IF 5.0 60 3.0 100 100 V mA A mW °C ID(RMS) IFSM IDRM Pdiss Tj 400 400 400 100 1.2 2.0 300 125 V V V mA A A mW °C VISO 5300 VRMS Creepage distance ≥ 7.0 mm Clearance distance ≥ 7.0 mm Ω INPUT Reverse voltage Forward current Surge current Power dissipation Junction temperature OUTPUT P.W. < 10 µs IFSM Pdiss Tj IL440-4 IL440-5 IL440-6 Peak off-state voltage On-state RMS current Peak surge current Peak on-state current Power dissipation Junction temperature COUPLER tp ≤ 10 ms tp/T = 0.01 ≤ 100 µs VDRM VDRM VDRM Isolation voltage, 1.0 s, per standard climate 23 °C/50 % RH, DIN 50014 Isolation resistance VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω Ptot 330 mW Total power dissipation Storage temperature range Tstg - 55 to + 125 °C Ambient temperature Tamb - 40 to + 100 °C Junction temperature Tj 100 °C Tsld 260 °C Lead soldering temperature (2) 2.0 mm from case, t < 10 s Notes (1) T amb = 25 °C, unless otherwise specified. Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 50 mA VF Reverse voltage IR = 10 μA VR VR = 0 V, f = 1.0 MHz Cj 50 ITM = 100 mA, IFT = 30 mA VTM 1.5 IF = 0, VS = 240 VRMS dVcr/dt 50 V/µs IF = 30 mA, VS = 60 VRMS dVcrq/dt 0.25 V/µs IF ≥ 10 mA, VS ≥ 3.0 V IH 1.0 mA Junction capacitance 1.25 V 5.0 V pF OUTPUT (2) Peak on-state voltage Critical rate of rise of off-state voltage 0.13 3.0 V COUPLER Holding current Notes (1) T amb = 25 °C, unless otherwise specified. Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (2) Off-state output terminal voltage (see table 1.) www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 83631 Rev. 1.6, 18-Jan-08 IL440 Optocoupler, Phototriac Output, Low Input Current Vishay Semiconductors IFT AND BLOCKING VOLTAGE SELECTION BV (V) MAXIMUM at IDRM = 500 nA IFT MAXIMUM at VT = 6 V, RL = 150 Ω IL440-4 400 15 IL440-5 400 10 IL440-6 400 5.0 BIN NUMBER Note Test voltage must be applied within dV/dt rating of 0.13 V/µs. MAXIMUM SAFETY RATINGS (1) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IS, INPUT 130 mA PS, OUTPUT 300 mW INPUT (2) Forward voltage OUTPUT Power dissipation Notes (1) According to DIN EN 60747-5-2(VDE 0884)/ DIN EN 60747-5-5 pending (see figure 1). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. (2) The device is used for protective separation agains electrical shock within the maximum safety ratings. This must be ensured by protective circuits in the applications. SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Climatic classification (according to IEC 68 part 1) Pollution degree TYP. MAX. UNIT 55/100/21 DIN VDE 0109 Comparative tracking index 2 CTI 175 VIOTM 8000 Vpeak VIORM 890 Vpeak Insulation resistance at 25 °C VIO = 500 V RIS ≥ 1012 Ω 109 Ω Insulation resistance at TS VIO = 500 V RIS ≥ Insulation resistance at 100 °C VIO = 500 V RIS ≥ 1011 Ω Method a, Vpd = VIORM x 1.875 Vpd 1669 Vpeak Partial discharge test voltage PSO 500 mW ISI 250 mA TSI 175 °C Clearance distance standard DIP-6 7 mm Creepage distance standard DIP-6 7 mm Clearance distance 400 mil DIP-6 8 mm Creepage distance 400 mil DIP-6 8 mm Note As per IEC60747-5-2, § 7.4.3.8.1, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of prodective circuits. Document Number: 83631 Rev. 1.6, 18-Jan-08 For technical questions, contact: [email protected] www.vishay.com 3 IL440 Optocoupler, Phototriac Output, Low Input Current Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 0.248 (6.30) 0.256 (6.50) ISO method A 0.335 (8.50) 0.343 (8.70) 0.048 0.039 (1.00) min. 0.300 (7.62) (0.45) typ. 0.022 (0.55) 0.130 (3.30) 0.150 (3.81) 18 ° 4° typ. 0.114 (2.90) 0.031 (0.80) min. 0.031 (0.80) 0.018 (0.45) 0.035 (0.90) 0.022 (0.55) 0.100 (2.54) typ. 0.130 (3.0) 3° to 9° 0.010 (0.25) typ. 0.300 to 0.347 (7.62 to 8.81) i178004 PACKAGE DIMENSIONS in inches (millimeters) Option 6 Option 7 Option 9 0.407 (10.36) 0.391 (9.96) 0.307 (7.8) 0.291 (7.4) 0.300 (7.62) typ. 0.375 (9.53) 0.395 (10.03 ) 0.300 (7.62) ref. 0.028 (0.7) min. 0.315 (8.0) min. 0.014 (0.35) 0.010 (0.25) 0.400 (10.16) 0.430 (10.92) www.vishay.com 4 0.331 (8.4) min. 0.406 (10.3) max. 0.180 (4.6) 0.160 (4.1) 0.0040 (0.102) 0.0098 (0.249) 0.012 (0.30 ) typ. 0.020 (0.51 ) 0.040 (1.02 ) 15° max. 0.315 (8.00) min. For technical questions, contact: [email protected] 18450 Document Number: 83631 Rev. 1.6, 18-Jan-08 IL440 Optocoupler, Phototriac Output, Low Input Current Vishay Semiconductors OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA. 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number: 83631 Rev. 1.6, 18-Jan-08 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1