LL4150 Vishay Semiconductors Small Signal Fast Switching Diode Features • • • • • Silicon Epitaxial Planar Diodes Low forward voltage drop e2 High forward current capability Lead (Pb)-free component Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC 94 9371 Applications • High speed switch and general purpose use in computer and industrial applications Mechanical Data Case: MiniMELF Glass case (SOD80) Weight: approx. 31 mg Cathode Band Color: Black Packaging Codes/Options: GS18/10 k per 13" reel (8 mm tape), 10 k/box GS08/2.5 k per 7" reel (8 mm tape), 12.5 k/box Parts Table Part LL4150 Ordering code Type Marking Remarks LL4150-GS18 or LL4150-GS08 - Tape and Reel Absolute Maximum Ratings Tamb = 25 °C, unless otherwise specified Parameter Test condition Symbol Value Unit VRRM 50 V VR 50 V tp = 1 µs IFSM 4 A IF 600 mA VR = 0 IFAV 300 mA PV 500 mW Repetitive peak reverse voltage Reverse voltage Peak forward surge current Forward continuous current Average forward current Power dissipation Thermal Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air on PC board 50 mm x 50 mm x 1.6 mm Junction temperature Storage temperature range Document Number 85558 Rev. 1.7, 30-Aug-06 Symbol Value Unit RthJA 500 K/W Tj 175 °C Tstg - 65 to + 175 °C www.vishay.com 1 LL4150 Vishay Semiconductors Electrical Characteristics Tamb = 25 °C, unless otherwise specified Parameter Test condition Forward voltage Symbol Min Max Unit IF = 1 mA VF 540 Typ. 620 mV IF = 10 mA VF 660 740 mV IF = 50 mA VF 760 860 mV IF= 100 mA VF 820 920 mV 870 1000 mV IF = 200 mA VF VR = 50 V IR 100 nA VR = 50 V, Tj = 150 °C IR 100 µA Diode capacitance VR = 0, f = 1 MHz, VHF = 50 mV CD 2.5 pF Reverse recovery time IF = IR = 10 to 100 mA, iR = 0.1 x IR, RL = 100 Ω trr 4 ns Reverse current Typical Characteristics Tamb = 25 °C, unless otherwise specified I R - Reverse Current (µA) 100 Scattering Limit 10 1 0.1 VR = 50 V 0.01 0 40 80 120 160 200 Tj - Junction Temperature (°C) 94 9100 Figure 1. Reverse Current vs. Junction Temperature I F - Forward Current (mA) 1000 100 Scattering Limit 10 1 Tj = 25 °C 0.1 0 94 9162 0.4 0.8 1.2 1.6 2.0 V F - Forward Voltage (V) Figure 2. Forward Current vs. Forward Voltage www.vishay.com 2 Document Number 85558 Rev. 1.7, 30-Aug-06 LL4150 Vishay Semiconductors Package Dimensions in mm (Inches): SOD80 96 12070 Document Number 85558 Rev. 1.7, 30-Aug-06 www.vishay.com 3 LL4150 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany www.vishay.com 4 Document Number 85558 Rev. 1.7, 30-Aug-06 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1