LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only TAPE AND REEL TYPE LED LAMPS LUY3333/P1/TRS-6N DATA SHEET DOC. NO : QW0905- LUY3333/P1/TRS-6N REV. : A DATE : 27 - Dec - 2004 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 1/5 PART NO. LUY3333/P1/TRS-6N Package Dimensions P2 ΔH H2 W2 H1 L W0 W1 D P1 F P T + - LUY3333/P1 5.0 5.9 7.6 8.6 12.8±0.5 1.5MAX 25.0MIN □0.5 TYP 1.0MIN 2.54TYP Note : 1.All dimension are in millimeter tolerance is ±0.25mm unless otherwise noted. 2.Specifications are subject to change without notice. W3 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 2/5 PART NO. LUY3333/P1/TRS-6N Absolute Maximum Ratings at Ta=25 ℃ Ratings Symbol Parameter UNIT UY Forward Current IF 50 mA Peak Forward Current Duty 1/10@10KHz IFP 90 mA Power Dissipation PD 120 mW Reverse Current @5V Ir 10 μA Electrostatic Discharge ESD 2000 V Operating Temperature Topr -40 ~ +85 ℃ Storage Temperature Tstg -40 ~ +100 ℃ Soldering Temperature Tsol Max 260 ℃ for 5 sec Max (2mm from body) Typical Electrical & Optical Characteristics (Ta=25 ℃) PART NO COLOR MATERIAL Emitted LUY3333/P1/TRS-6N AlGaInP Yellow Lens Water Clear Luminous Dominant Spectral Forward voltage intensity halfwidth wave length △λ nm @20mA(V) @20mA(mcd) λDnm Min. Max. Min. Typ. 595 15 1.7 Note : 1.The forward voltage data did not including ±0.1V testing tolerance. 2. The luminous intensity data did not including ±15% testing tolerance. 2.6 1500 2700 Viewing angle 2θ 1/2 (deg) 20 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page 3/5 PART NO. LUY3333/P1/TRS-6N •Dimension Symbol Information OPTION SYMBOL CODE SYMBOL ITEMS SPECIFICATIONS Minimum inch mm Maximum mm inch Tape Feed Hole Diameter ------- D 3.8 0.15 4.2 0.17 Component Lead Pitch ------- F 2.3 0.09 3.0 0.12 Front-To-Rear Deflection ------- △H ------- ------- 2.0 0.08 TRS-6N H1 19.9 0.78 20.9 0.82 Feed Hole To Overall Component Height ------- H2 ------- 36 1.42 Lead Length After Component Height ------- L 11.0 0.43 Feed Hole Pitch ------- P 12.4 0.49 13.0 0.51 Lead Location ------- P1 4.4 0.17 5.8 0.23 Center Of Component Location ------- P2 5.1 0.2 7.7 0.3 Overall Taped Package Thickness ------- T ------- ------- 1.42 0.06 Feed Hole Location ------- W0 8.5 0.33 9.75 0.38 Adhesive Tape Width ------- W1 14.5 0.57 15.5 0.61 Adhesive Tape Position ------- W2 0 0 4.0 0.16 Tape Width ------- W3 17.5 0.69 19 0.75 Feed Hole To Bottom Of Component ------- W0 REMARK:TRS=Tape And Reel Straight Leads • Dimensions Symbol Information Description Symbol • Package Dimensions Specification minimum maxmum mm inch mm inch Reel Diameter D 78.2 3.08 380 14.96 Core Diameter D1 34.9 1.37 102 4.02 Hub Recess Inside Diameter D2 28.6 1.13 88.0 3.46 Arbor Hole Diameter 13.8 0.54 38.1 1.5 Overall Reel Thickness D3 T2 57.2 2.25 Iside Reel Flange Thickness T1 30.0 50.0 1.97 Package LUY3333/P1/TRS-6N 1.18 Quantity/Reel 1000PCS D3 MARKING D2 D1 D T1 T2 LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only Page4/5 PART NO. LUY3333/P1/TRS-6N Typical Electro-Optical Characteristics Curve UY CHIP Fig.1 Forward current vs. Forward Voltage Fig.2 Relative Intensity vs. Forward Current 3.0 Relative Intensity Normalize @20mA Forward Current(mA) 1000 100 10 1.0 0.1 2.5 2.0 1.5 1.0 0.5 0 1.0 2.0 3.0 5.0 4.0 1.0 10 Fig.4 Relative Intensity vs. Temperature 1.2 Relative Intensity @20mA Normalize @25 ℃ Forward Voltage@20mA Normaliz @25 ℃ Fig.3 Forward Voltage vs. Temperature 1.1 1.0 0.9 0.8 -20 0 20 40 60 80 3.0 2.5 2.0 1.5 1.0 0.5 0 100 -40 -20 0 20 40 60 80 100 Ambient Temperature(℃) Ambient Temperature( ℃) Fig.6 Directivity Radiation Fig.5 Relative Intensity vs. Wavelength Relative Intensity @20mA 1000 Forward Current(mA) Forward Voltage(V) -40 100 0° 1.0 -30 ° 30° -60 ° 0.5 0 100% 75% 50% 500 550 600 Wavelength (nm) 650 60° 25% 0 25% 50% 75% 100% LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only PART NO. LUY3333/P1/TRS-6N Page 5/5 Reliability Test: Test Item Test Condition Description Reference Standard Operating Life Test 1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs) This test is conducted for the purpose of detemining the resisance of a part in electrical and themal stressed. MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1 High Temperature Storage Test 1.Ta=105 ℃±5℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under ondition of hogh temperature for hours. MIL-STD-883:1008 JIS C 7021: B-10 Low Temperature Storage Test 1.Ta=-40 ℃±5 ℃ 2.t=1000 hrs (-24hrs, +72hrs) The purpose of this is the resistance of the device which is laid under condition of low temperature for hours. High Temperature High Humidity Test 1.Ta=65 ℃±5 ℃ 2.RH=90 %~95% 3.t=240hrs ±2hrs The purpose of this test is the resistance of the device under tropical for hous. 1.Ta=105 ℃±5℃ &-40 ℃±5 ℃ (10min) (10min) 2.total 10 cycles The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011 Solder Resistance Test 1.T.Sol=260 ℃±5℃ 2.Dwell time= 10 ±1sec. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire. MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1 Solderability Test 1.T.Sol=230 ℃±5℃ 2.Dwell time=5 ±1sec This test intended to see soldering well performed or not. MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2 Thermal Shock Test JIS C 7021: B-12 MIL-STD-202:103B JIS C 7021: B-11