ETC MA1405

Wiegand to RS232 Converter (MA1405)
April 2004
Wiegand-to-RS232 Converter (MA1405)
MaCaPS MA1405 is a Wiegand-to-RS232
Bidirectional converter. The converter can
automatically convert Wiegand input from
3-bit up to 42-bit to a formatted ASCII string.
When the formatted ASCII string is used as
input to the RS232 port of another MA1405
unit, the formatted ASCII string is
reconverted to Wiegand format output.
1
1.1
Specification:
Communications:
9600 BPS ASYNC, 8 bits, 1 Stop, No Parity.
1.2
Wiegand Input/Output Format
The format of the Wiegand bit stream is shown as follows:
Copyright © 2003 MaCaPS International Limited
http://www.macaps.com.hk
Page 1 of 4
Wiegand to RS232 Converter (MA1405)
1.3
April 2004
RS232 Input/Output Format
The format of the RS232 is in the form of 16-byte ASCII string (In Hex format) as
follow:
The Parity Character P is decoded as follows:
RS232 Side
1.4
Wiegand Side
P
PS
PE
0
0
0
1
0
1
2
1
0
3
1
1
Command Data:
4 Bytes Hex Value
Description
02H31H30H03H
Turn on Reader Green LED
02H31H31H03H
Turn off Reader Green LED
02H31H32H03H
Toggle LED (Bi-Color LED Turns Orange)
02H32H30H03H
Turn on Reader Buzzer
02H32H31H03H
Turn off Reader Buzzer
02H33H30H03H
Turn on Converter LED
02H33H31H03H
Turn off Converter LED
02H34H30H03H
Turn on Converter Relay
02H34H31H03H
Turn off Converter Relay
02H35H30H03H
Turn on Converter Buzzer
02H35H31H03H
Turn off Converter Buzzer
02H36H30H03H
Turn on Reader Red LED
02H36H31H03H
Turn off Reader Red LED
Copyright © 2003 MaCaPS International Limited
http://www.macaps.com.hk
Page 2 of 4
Wiegand to RS232 Converter (MA1405)
2
April 2004
Pin Connectors:
The schematic of the MA1405 is shown in the following figure.
2.1
Connector K1
D1:
Wiegand Data 1
D0:
R:
G:
Buz:
GND:
5V:
12V:
Wiegand Data 0
To Reader Red LED
To Reader Green LED
To Reader Buzzer
Ground
5V DC output
12V DC output
+:
-:
Power Supply +12V In
Power Supply Ground
Copyright © 2003 MaCaPS International Limited
http://www.macaps.com.hk
Page 3 of 4
Wiegand to RS232 Converter (MA1405)
2.2
DB 9 Male
1.
DCD Unused
2.
3.
4.
5.
6.
7.
8.
TX data from converter
RX data from terminal
DTR Unused
Ground
DSR Unused
RTS Unused
CTS Unused
3
3.1
April 2004
Example
Wiegand-to-RS232
Input: Wiegand (26-bit)
Output: 16-byte ASCII string from RS232 port
3.2
RS232-to-Wiegand
This is a reversed process of Wiegand-to-RS232
Input: 16-byte ASCII string to RS232 port
Output: Wiegand (26-bit)
Copyright © 2003 MaCaPS International Limited
http://www.macaps.com.hk
Page 4 of 4