CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications L Series UL Recognized CSA Certified VDE Approved EDL4C/EHL4C EDL1S/EHL1S L Series Voltage Selection The L series power entry modules are compact units that combine a multi-function power entry module and high performance RFI filtering capabilities. They are available with either a four-voltage selector or a DPST on/off switch. Both variations can be specified with North American or European fusing capabilities and are available in either flange or snap-in mounting. To change selected voltage: disconnect the power cord; open cover using a small blade screwdriver or similar tool; insert the tool into the voltage selection slot and remove wheel from unit; select desired voltage; replace wheel into unit and close cover, making sure the selected voltage appears in connector window. These filters are UL recognized, CSA certified, and VDE approved. The L series modules offer a choice of filters for general or medical applications. Note: All models have North American or dual European fusing capability and are available in either flange or snap-in mounting. EDL Models The RFI filter is for general purpose applications where line-to-line and line-to-ground noise must be controlled. The filter is designed to meet the very low leakage requirements of VDE portable equipment. They are available in three current ratings. EHL Models Voltage selection slot 4-Voltage selection wheel Fuseholder Cover This medical filter provides susceptibility protection without the leakage current associated with line-to-ground capacitors. Designed to allow equipment to meet UL544 for patient care and non-patient care equipment, the EHL filter has a maximum leakage current of 2 µA at 120 VAC 60 Hz. See Appendix C for more information on medical applications and UL standards. Note: When using the models with an IEC connector, remember that the leakage current of the companion line cord, GA400, is more significant than that of the filter which may disqualify this line cord from use in patient care applications. 118 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications (Continued) L Series Specifications Maximum leakage current, each line-to-ground: Electrical Schematics DL Models (with switch) Note 1 Neutral H Ground Note 2 On/Off 2 (1) 1 (1a) (2) 4 (2a) 3 Device G DL Models (with 4-voltage selection) Cutomer 220V 240V Transformer Primaries A A A B B B C C C 120V 100V Hot Note 1 Note 2 On/Off G Ground Neutral D D D E E E F F F 20V 100V @120 VAC 60 Hz: @250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line 1500 1450 Operating frequency: Operating voltages: 1S & 1SC Suffix (fixed): 4 & 4C Suffix (selectable): Rated current: 2EDL & 2EHL 4EDL & 4EHL 6EL, 6EDL & 6EHL Switch: 120V 250 VAC Max. 100, 120, 220, 240 VAC H Fuse (not included): Note 1 Neutral H Ground Hot Customer Transformer Primaries Note 2 On/Off 2 (1) 1 (1a) (2) 4 (2a) 3 Device G HL Models (with 4-voltage selection) 220V 240V Customer Transformer Primaries A A A B B B C C C 120V 100V Note 1 G Ground Neutral 50/60 Hz 2A 4A 6A Double-insulated, rated for 10,000 operations at full load. 51 Amp inrush capability. Accepts one .25" x 1.25" fuse or two 5 x 20 mm fuses HL Models (with switch) Hot 1500 1450 Power Entry Modules Hot Cutomer Transformer Primaries EDL EHL Models Models 0.25 mA 2 µA 0.50 mA 5 µA Note 2 On/Off D D D E E E F F F H Terminals: 110 [2.79] except for switch .187 [4.8] for switch Minimum insertion loss in dB: Line-to-ground in 50 ohm circuit Current Frequency-MHz .15 1 5 .05 Rating EDL Models 2A 6 14 24 40 18 32 8 4A 2 6A 1 6 17 31 EHL Models 06A 3 8 15 18 10 30 45 38 37 50 45 45 18 18 Line-to-line in 50 ohm circuit 20V 100V 120V Current Rating .05 EDL Models 2A 7 4A 6 6A 6 EHL Models 4 06A Frequency-MHz .5 1 3 5 10 30 16 14 15 21 18 20 23 23 25 37 26 24 47 45 45 50 47 50 14 20 28 32 38 42 Note 1: Provision for dual European style fusing. Note 2: On/Off switch present only with "S" suffix. Resistor location for reference only. 119 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Flange mounted version Power Entry Module with RFI Power Line Filter for General or Medical Applications (Continued) L Series Case Styles — Unfiltered Models Case Styles — Filtered Models Flange Models Flange Models 3 C D F B A 4 1 2 G H D C Side View .221 5.61 Side View .221 5.61 E E .06 R 1.52 3 4 2.201* 55.91 2 1 H G 2.213* 56.21 Snap-in version Snap-In Models * +.008 -.00 A .020 R .508 1.122* 28.50 1.575 40.00 Back View +.203 -.00 C B Recommended Panel Cutout G E F D H C D Typical dimensions: Mounting Holes: .126 [3.20 ] Dia. (2) All backplate terminals: .110 [2.79 ] terminals, except for switch. Switch terminals are .187 [4.765 ] Note: Snap-in models allow front mounting only. .221 5.61 Snap-In Models Side View E Note: Metric fuse models have additional jumper from filter-to-module. C D Case Dimensions Side View F A .221 5.61 E .06 R 1.52 A C B G E F D (1) 2.201* 55.91 (2) 2.213* 56.21 H .020 R .508 1.122* 28.50 * +.008 -.00 +.203 -.00 Back View B C (max) D E F (max) (max) (max) Part No. A (max) Flange Unfiltered Snap-in Unfiltered 1.98 1.575 2.3 50.29 40.0 58.42 1.28 2.3 — 32.51 58.42 2.14 54.36 2.14 54.36 1.66 1.11 42.16 28.19 1.66 1.11 42.16 28.19 Flange Filtered 2.3 1.98 1.575 50.29 40.0 58.42 2.14 54.36 2.01 1.11 51.05 28.19 Snap-in Filtered 1.28 32.51 2.14 54.36 2.01 1.11 51.05 28.19 ±.015 ±.381 — 2.3 58.42 Recommended Panel Cutout (1) For panel thickness of .031-.079 [0.8-2.0] (2) For panel thickness of .083-.126 [2.1-3.2] (3) For snap-in application, the 1.22 [28.5] sides of the cutout must have a .02 [.508] radius on the installation side. All backplate terminals: .110 [2.79] terminals, except for switch. Switch terminals are .187 [4.75] Note: Snap-in models allow front mounting only. 120 Catalog 1654001 Revised 05-07 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com CORCOM Product Guide Power Entry Module with RFI Power Line Filter for General or Medical Applications (Continued) L Series UNFILTERED MODELS Current Rating 6EL1S 6EL1SC 6EL1SM 6EL1SCM 6EL4 6EL4C 6EL4M 6EL4CM 6A 6A 6A 6A 6A 6A 6A 6A Available Voltage Selection Position 1 1 1 1 4 4 4 4 DPST On/Off Switch • • • • Mounting Style Fuseholder Type Flange Snap-In Flange Snap-In Flange Snap-In Flange Snap-in North American North American Metric Metric North American North American Metric Metric DPST On/Off Switch • • • • Mounting Style Fuseholder Type Flange Snap-In Flange Snap-In Flange Snap-In Flange Snap-in Flange Snap-in Flange Snap-in Flange Snap-in Flange Snap-in Flange Flange Flange Snap-in Flange Snap-in Flange Snap-in Flange Snap-in Flange Snap-in Flange Snap-in Flange Snap-in North American North American Metric Metric North American North American Metric Metric North American North American Metric Metric North American North American Metric Metric North American North American Metric Metric North American North American Metric Metric North American North American Metric Metric North American North American Metric Metric Power Entry Modules Part Number FILTERED MODELS Part Number Filter Type Current Rating 2EDL1S 2EDL1SC 2EDL1SM 2EDL1SCM 2EDL4 2EDL4C 2EDL4M 2EDL4CM 4EDL1S 4EDL1SC 4EDL1SM 4EDL1SCM 4EDL4 4EDL4C 4EDL4M 4EDL4CM 6EDL1S 6EDL1SC 6EDL1SM 6EDL1SCM 6EDL4 6EDL4C 6EDL4M 6EDL4CM 6EHL1S 6EHL1SC 6EHL1SM 6EHL1SCM 6EHL4 6EHL4C 6EHL4M 6EHL4CM Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Linear Medical Medical Medical Medical Medical Medical Medical Medical 2A 2A 2A 2A 2A 2A 2A 2A 4A 4A 4A 4A 4A 4A 4A 4A 6A 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 Available Voltage Selection Position 1 1 1 1 4 4 4 4 1 1 1 1 4 4 4 4 1 1 1 1 4 4 4 4 1 1 1 1 4 4 4 4 Dimensions are in inches and millimeters unless otherwise specified. Values in italics are metric equivalents. Dimensions are shown for reference purposes only. Specifications subject to change. • • • • • • • • • • • • • Includes DPST switch 121 Catalog 1654001 Revised 05-07 USA Cust. Svc.: 1-800-468-2023 CORCOM Prods: 1-847-680-7400 Germany: 49-89-6089-0 www.corcom.com www.tycoelectronics.com