3KBP005M thru 3KBP08M VISHAY Vishay Semiconductors Glass Passivated Single-Phase Bridge Rectifier Case Style KBPM Major Ratings and Characteristics IF(AV) 3A VRRM 50 V to 800 V IFSM 80 A IR 5 µA VF 1.05 V Tj max. 150 °C Features • • • • • ~ ~ ~ Pr od uc t ~ Mechanical Data UL Recognition file number E54214 Ideal for printed circuit board High surge current capability High case dielectric strength Meets MSL level 1, per J-STD-020C Case: KBPM Epoxy meets UL-94V-0 Flammability rating Terminals: Silver plated (E4 Suffix) leads, solderable per J-STD-002B and MIL-STD-750, Method 2026 Polarity: As marked on body Typical Applications Maximum Ratings N ew General purpose use in ac-to-dc bridge full wave rectification for Switching Power Supply, Home Appliances, Office Equipment, and Telecommunication applications Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Symbols 3KBP 005M 3KBP 01M 3KBP 02M 3KBP 04M 3KBP 06M 3KBP 08M Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 V Maximum RMS voltage VRMS 35 70 140 280 420 560 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 V Maximum average forward output rectified current at TA = 55 °C (Fig. 1) IF(AV) 3.0 A Peak forward surge current 50 Hz single half sine-wave superimposed on rated load IFSM 80 A I2 t 32 A2sec TJ, TSTG - 55 to + 150 °C Rating for fusing (t < 10 ms) Operating junction and storage temperature range Document Number 88888 03-Dec-04 www.vishay.com 1 3KBP005M thru 3KBP08M VISHAY Vishay Semiconductors Electrical Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Test condition Symbols 3KBP 005M 3KBP 01M 3KBP 02M 3KBP 04M 3KBP 06M 3KBP 08M Units Maximum instantaneous forward voltage drop per leg at 3.0 A VF 1.05 V Maximum DC reverse current at rated DC blocking voltage per leg TA = 25 °C TA = 125 °C IR 5.0 500 µA Typical junction capacitance per leg at 4.0 V, 1 MHz CJ 25 pF Thermal Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Symbols 3KBP 005M 3KBP 01M 3KBP 02M RθJA RθJL Typical thermal resistance per leg (1) 3KBP 04M 3KBP 06M 3KBP 08M 30 11 Units °C/W Notes: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12 mm) copper pads. Ratings and Characteristics Curves (TA = 25 °C unless otherwise noted) 60 HZ Resistive or Induction Load 3 WITH HEAT SINK 2 WITHOUT HEAT SINK 1 0 0 20 40 60 80 100 120 140 TA - Ambient Temperature (°C) Figure 1. Forward Current Derating Curve www.vishay.com 2 100 Heat Sink Mounting: 3.0 x 3.0 x 0.11” Thick (7.5 x 7.5 x 0.3 cm) Al. Plate Peak Forward Surge Current (A) Average Forward Current (A) 4 160 80 60 40 20 0 1 100 10 Number of Cycles at 60 HZ Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg Document Number 88888 03-Dec-04 3KBP005M thru 3KBP08M VISHAY Vishay Semiconductors 100 Junction Capacitance (pF) Instantaneous Forward Current (A) 10 Tj = 150°C 1 Tj = 125°C Tj = 25°C 0.1 0.01 0.4 0.5 0.6 0.7 0.9 0.8 1.0 1.1 10 1 0.1 1.2 TJ = 25°C f = 1.0 MHZ Vsig = 50mVp-p Instantaneous Forward Voltage (V) 1 10 100 Reverse Voltage (V) Figure 3. Typical Forward Characteristics Per Leg Figure 5. Typical Junction Capacitance Per Leg Instantaneous Reverse Current (µA) 100 TJ = 150°C 10 TJ = 125°C 1 0.1 TJ = 25°C 0.01 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Per Leg Package outline dimensions in inches (millimeters) Case Style KBPM 0.125 x 45o (3.2) 0.600 (15.24) 0.560 (14.22) 0.460 (11.68) 0.500 (12.70) 0.420 (10.67) 0.460 (11.68) 60 (15.2) MIN. 0.034 (0.86) 0.028 (0.76) DIA. 0.200 (5.08) 0.180 (4.57) 0.50 (12.7) Min. 0.060 (1.52) 0.160 (4.1) 0.140 (3.6) 0.105 (2.67) 0.085 (2.16) Polarity shown on front side of case: positive lead by beveled corner Document Number 88888 03-Dec-04 www.vishay.com 3