Tyco/Electronics PRODUCT: RHE1300 Raychem Circuit Protection DOCUMENT: SCD 24263 PCN: 194113 REV LETTER: F REV DATE: OCTOBER 8, 2001 PAGE NO.: 1 OF 1 PolySwitch® PTC Devices 308 Constitution Drive Menlo Park, CA 94025-1164 800-227-4856 FAX 800-227-4866 Overcurrent Protection Device Specification Status: RELEASED Electrical Rating Voltage: 16V DC MAX Current: 100A MAX INSULATING MATERIAL: Cured, Flame Retarded Epoxy Polymer meets UL94 V-0 Requirements LEAD MATERIAL: 18 AWG Tin/Lead Plated Copper PART MARKING: Raychem Logo and Voltage 16 H13 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX -23.5 -28.7 -(0.925) -(1.13) *Rounded off approximation C MIN 9.4 (0.37) D MAX 10.9 (0.43) MIN 7.6 (0.30) E MAX --- MIN --- MAX 3.6 (0.14) F TYP 1.4 (0.06) TABLE II. PERFORMANCE RATINGS: I HOLD CURRENT RATINGS TIME TO TRIP RESISTANCE AMPS 25°C HOLD 13.0 AMPS AMPS AMPS AT 0°C AT 25°C AT 60°C HOLD TRIP HOLD TRIP HOLD TRIP --13.0 24.0 --- SECONDS AT 25°C,65A MAX 13.0 OHMS AT 25°C MIN MAX 0.0041 0.0100 Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: TRIPPED-STATE POWER DISSIPATION WATTS AT 25°C, 16V TYP 6.9 UL, TUV, CSA recognized. PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.