Tyco Electronics Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025 Phone: 800-227-4856 Fax: 800-227-4866 PolySwitch® PTC Devices PRODUCT: SRP175 DOCUMENT: SCD 22676 PCN: 741515 REV LETTER: G REV DATE: JUNE 12, 2001 PAGE NO.: 1 OF 1 Overcurrent Protection Device Specification Status - Released Electrical Rating A Voltage: 15V MAX Current: 100A MAX C E D Leads: Nickel: 0.125 mm nom B F Tape: Polyester Marking: Orientation Mark Manufacturer's Mark 175 Part Identification Lot Identification TABLE I. DIMENSIONS: A B MIN MAX MIN MAX mm: 20.9 23.1 4.9 5.2 in*: (0. 82) (0.91) (0.19) (0.20) *Rounded off approximation C MIN 0.6 (0.02) D MAX 1.0 (0.04) MIN 4.1 (0.16) E MAX 5.5 (0.22) MIN 4.1 (0.16) F MAX 5.5 (0.22) MIN 3.9 (0.15) G MAX 4.1 (0.16) MIN --- MAX --- TABLE II. PERFORMANCE RATINGS: I HOLD AMPS 20°C HOLD 1.75 CURRENT TRIP LIMITS TIME TO TRIP REFERENCE RESISTANCE AMPS AMPS AMPS AMPS SECONDS AT OHMS AT 0°C AT 20°C AT 60°C AT 85°C 20°C, 8.75 A AT 20°C HOLD TRIP HOLD TRIP HOLD TRIP HOLD TRIP MAX MIN MAX 2.0 4.4 1.75 3.8 1.2 2.7 0.9 -5 0.050 0.090 Reference Documents: Precedence: Effectivity: CAUTION: ONE-HOUR POST-TRIP RESISTANCE OHMS AT 20°C MIN MAX 0.050 0.120 TRIPPEDSTATE POWER DISSIPATION WATTS AT 20°C, 15V MAX 1.5 PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.