ONSEMI NSS1C200MZ4

NSS1C200MZ4
100 V, 2.0 A, Low VCE(sat)
PNP Transistor
ON Semiconductor's e2 PowerEdge family of low VCE(sat)
transistors are miniature surface mount devices featuring ultra low
saturation voltage (VCE(sat)) and high current gain capability. These
are designed for use in low voltage, high speed switching applications
where affordable efficient energy control is important.
Typical applications are DC-DC converters and power management
in portable and battery powered products such as cellular and cordless
phones, PDAs, computers, printers, digital cameras and MP3 players.
Other applications are low voltage motor controls in mass storage
products such as disc drives and tape drives. In the automotive
industry they can be used in air bag deployment and in the instrument
cluster. The high current gain allows e2PowerEdge devices to be
driven directly from PMU's control outputs, and the Linear Gain
(Beta) makes them ideal components in analog amplifiers.
•This is a Pb-Free Device
http://onsemi.com
-100 VOLTS, 2.0 AMPS
PNP LOW VCE(sat) TRANSISTOR
COLLECTOR
3
1
BASE
2
EMITTER
MAXIMUM RATINGS (TC = 25°C unless otherwise noted)
Rating
Symbol
Max
Unit
VCEO
-100
Vdc
Collector‐Base Voltage
VCB
-140
Vdc
Emitter‐Base Voltage
VEB
-7.0
Vdc
Base Current - Continuous
IB
1.0
Adc
Collector Current - Continuous
Collector Current - Peak
IC
2.0
3.0
Adc
Total Power Dissipation
Total PD @ TA = 25°C (Note 1)
Total PD @ TA = 25°C (Note 2)
PD
Operating and Storage Junction
Temperature Range
TJ, Tstg
Collector‐Emitter Voltage
W
2.0
0.8
°C
-55 to
+150
MARKING
DIAGRAM
SOT-223
CASE 318E
STYLE 1
A
Y
W
1C200
G
Characteristic
Symbol
RqJA
Maximum Lead Temperature for
Soldering Purposes, 1/8″ from
case for 5 seconds
TL
1
= Assembly Location
= Year
= Work Week
= Specific Device Code
= Pb-Free Package
PIN ASSIGNMENT
THERMAL CHARACTERISTICS
Thermal Resistance,
Junction-to-Ambient (Note 1)
Junction-to-Ambient (Note 2)
AYW
1C200G
Max
4
C
Unit
°C/W
64
155
°C
260
B
C
E
1
2
3
Top View Pinout
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. mounted on 1″ sq. (645 sq. mm) Collector pad on FR-4 bd material
2. mounted on 0.012″ sq. (7.6 sq. mm) Collector pad on FR-4 bd material
ORDERING INFORMATION
Package
Shipping†
NSS1C200T1G
SOT-223
(Pb-Free)
1000/
Tape & Reel
NSS1C200T3G
SOT-223
(Pb-Free)
4000/
Tape & Reel
Device
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
© Semiconductor Components Industries, LLC, 2008
April, 2008 - Rev. 0
1
Publication Order Number:
NSS1C200MZ4/D
NSS1C200MZ4
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Typ
Max
Unit
Collector-Emitter Breakdown Voltage (IC = -10 mAdc, IB = 0)
V(BR)CEO
-100
Vdc
Collector-Base Breakdown Voltage (IC = -0.1 mAdc, IE = 0)
V(BR)CBO
-140
Vdc
Emitter-Base Breakdown Voltage (IE = -0.1 mAdc, IC = 0)
V(BR)EBO
-7.0
Vdc
OFF CHARACTERISTICS
Collector Cutoff Current (VCB = -140 Vdc, IE = 0)
ICBO
-100
nAdc
Emitter Cutoff Current (VEB = -6.0 Vdc)
IEBO
-50
nAdc
ON CHARACTERISTICS
DC Current Gain (Note 3)
(IC = -10 mA, VCE = -2.0 V)
(IC = -500 mA, VCE = -2.0 V)
(IC = -1.0 A, VCE = -2.0 V)
(IC = -2.0 A, VCE = -2.0 V)
hFE
150
120
80
50
Collector-Emitter Saturation Voltage (Note 3)
(IC = -0.1 A, IB = -0.010 A)
(IC = -0.5 A, IB = -0.050 A)
(IC = -1.0 A, IB = -0.100 A)
(IC = -2.0 A, IB = -0.200 A)
VCE(sat)
Base-Emitter Saturation Voltage (Note 3)
(IC = -1.0 A, IB = -0.100 A)
VBE(sat)
Base-Emitter Turn-on Voltage (Note 3)
(IC = -1.0 A, VCE = -2.0 V)
VBE(on)
360
V
-0.040
-0.080
-0.125
-0.220
V
-0.950
V
-0.850
Cutoff Frequency
(IC = -100 mA, VCE = -5.0 V, f = 100 MHz)
fT
MHz
Input Capacitance (VEB = 3.0 V, f = 1.0 MHz)
Cibo
200
pF
Output Capacitance (VCB = 10 V, f = 1.0 MHz)
Cobo
22
pF
120
3. Pulsed Condition: Pulse Width = 300 msec, Duty Cycle ≤ 2%.
TYPICAL CHARACTERISTICS
PD, POWER DISSIPATION (W)
2.5
2.0
TC
1.5
1.0
TA
0.5
0
25
50
75
100
125
T, TEMPERATURE (°C)
Figure 1. Power Derating
http://onsemi.com
2
150
NSS1C200MZ4
TYPICAL CHARACTERISTICS
500
VCE = 2 V
150°C
400
300
25°C
200
-55°C
100
400
300
25°C
200
-55°C
100
0
0
0.001
0.01
0.1
1
10
0.001
0.01
Figure 2. DC Current Gain
Figure 3. DC Current Gain
VCE(sat), COLLECTOR-EMITTER
SATURATION VOLTAGE (V)
150°C
25°C
-55°C
0.01
IC/IB = 20
150°C
25°C
0.1
-55°C
0.01
0.001
0.01
0.1
1
10
0.001
0.01
IC, COLLECTOR CURRENT (A)
0.1
1
10
IC, COLLECTOR CURRENT (A)
Figure 4. Collector-Emitter Saturation Voltage
Figure 5. Collector-Emitter Saturation Voltage
1.2
1.2
IC/IB = 10
IC/IB = 50
VBE(sat), BASE-EMITTER
SATURATION VOLTAGE (V)
VBE(sat), BASE-EMITTER
SATURATION VOLTAGE (V)
10
1
0.1
1.0
0.8 -55°C
0.4
1
IC, COLLECTOR CURRENT (A)
IC/IB = 10
0.6
0.1
IC, COLLECTOR CURRENT (A)
1
VCE(sat), COLLECTOR-EMITTER
SATURATION VOLTAGE (V)
VCE = 4 V
150°C
hFE, DC CURRENT GAIN
hFE, DC CURRENT GAIN
500
25°C
150°C
0.2
1.0
0.8 -55°C
25°C
0.6
0.4
150°C
0.2
0.001
0.01
0.1
1
10
0.001
IC, COLLECTOR CURRENT (A)
0.01
0.1
1
IC, COLLECTOR CURRENT (A)
Figure 6. Base-Emitter Saturation Voltage
Figure 7. Base-Emitter Saturation Voltage
http://onsemi.com
3
10
NSS1C200MZ4
1.2
1
VCE = 2 V
VCE(sat), COLLECTOR-EMITTER
SATURATION VOLTAGE (V)
VBE(on), BASE-EMITTER VOLTAGE (V)
TYPICAL CHARACTERISTICS
1.0
0.8 -55°C
25°C
0.6
0.4
150°C
0.2
0.01
0.1
1
0.5 A
0.1
IC = 0.1 A
10
TJ = 25°C
0.0001
0.001
0.01
0.1
1
IC, COLLECTOR CURRENT (A)
IB, BASE CURRENT (A)
Figure 8. Base-Emitter Voltage
Figure 9. Collector Saturation Region
120
Cob, OUTPUT CAPACITANCE (pF)
400
Cib, INPUT CAPACITANCE (pF)
1.0 A
0.01
0.001
TJ = 25°C
ftest = 1 MHz
300
200
100
0
TJ = 25°C
ftest = 1 MHz
100
80
60
40
20
0
0
1
2
3
4
5
6
7
8
0
20
30
40
50
60
70
80
VCB, COLLECTOR BASE VOLTAGE (V)
Figure 10. Input Capacitance
Figure 11. Output Capacitance
90 100
10
TJ = 25°C
ftest = 1 MHz
VCE = 10 V
IC, COLLECTOR CURRENT (A)
100
10
VBE, EMITTER BASE VOLTAGE (V)
120
fTau, CURRENT-GAIN BANDWIDTH
PRODUCT (MHz)
3.0 A
2.0 A
80
60
40
20
0
0.5 mS
1
100 mS
1 mS
10 mS
0.1
TJ = 25°C
0.01
0.001
0.01
0.1
1
1
10
IC, COLLECTOR CURRENT (A)
VCE, COLLECTOR EMITTER VOLTAGE (V)
Figure 12. Current-Gain Bandwidth Product
Figure 13. Safe Operating Area
http://onsemi.com
4
100
NSS1C200MZ4
PACKAGE DIMENSIONS
SOT-223 (TO-261)
CASE 318E-04
ISSUE L
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
D
b1
DIM
A
A1
b
b1
c
D
E
e
e1
L1
HE
4
HE
E
1
2
3
b
e1
e
A
0.08 (0003)
q
C
q
A1
MIN
1.50
0.02
0.60
2.90
0.24
6.30
3.30
2.20
0.85
1.50
6.70
0°
STYLE 1:
PIN 1.
2.
3.
4.
L1
MILLIMETERS
NOM
MAX
1.63
1.75
0.06
0.10
0.75
0.89
3.06
3.20
0.29
0.35
6.50
6.70
3.50
3.70
2.30
2.40
0.94
1.05
1.75
2.00
7.00
7.30
10°
-
MIN
0.060
0.001
0.024
0.115
0.009
0.249
0.130
0.087
0.033
0.060
0.264
0°
INCHES
NOM
0.064
0.002
0.030
0.121
0.012
0.256
0.138
0.091
0.037
0.069
0.276
-
MAX
0.068
0.004
0.035
0.126
0.014
0.263
0.145
0.094
0.041
0.078
0.287
10°
BASE
COLLECTOR
EMITTER
COLLECTOR
SOLDERING FOOTPRINT
3.8
0.15
2.0
0.079
2.3
0.091
2.3
0.091
6.3
0.248
2.0
0.079
1.5
0.059
SCALE 6:1
mm Ǔ
ǒinches
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800-282-9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81-3-5773-3850
http://onsemi.com
5
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NSS1C200MZ4/D