SPECIFICATION CONTROL DRAWING Product Revisions Part Name SLT-3X B SLT-5X B SLT-6X C SLT-7X C SLT-12X E SLT-14X H Component Dimensions L B C max min min 17.3 2.7 3.1 (0.681) (0.106) (0.122) 17.3 4.4 5.0 (0.681) (0.173) (0.197) 20.0 5.9 6.4 (0.787) (0.2.32) (0.252) 20.0 7.1 7.6 (0.787) (0.280) (0.299) 31.5 10.8 11.6 (1.240) (0.425) (0.457) 31.2 13.3 13.8 (1.228) (0.524) (0.543) E max 3.1 (0.122) 5.0 (0.197) 6.4 (0.252) 7.6 (0.299) 11.6 (0.457) 13.3 (0.524) F min 1.4 (0.055) 2.5 (0.098) 3.2 (0.126) 4.1 (0.161) 7.3 (0.287) 8.1 (0.319) Cable Dimensions G H ±0.5(0.020) ±0.5(0.020) 7 6 (0.276) (0.236) 7 6 (0.276) (0.236) 7 6 (0.276) (0.236) 7 6 (0.276) (0.236) 9.5 8.5 (0.374) (0.335) 7 6 (0.276) (0.236) D max 2.7 (0.106) 4.4 (0.173) 5.9 (0.2.32) 7.1 (0.280) 10.8 (0.425) 8.9 (0.350) MATERIAL 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent clear. 2. SOLDER PREFORM WITH FLUX: SOLDER: TYPE Cd18 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. Color: red. 3. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: blue. 4. MELTABLE SEALING RING: Thermally stabilized thermoplastic. Color: clear. APPLICATION 1. This controlled soldering device is designed for termination of a tin or silver plated copper shield on a cable having an insulation rated for at least +105°C. 2. Temperature range: -55°C to +125°C. 3. For application tooling contact your local Raychem technical service. For best results, prepare the cable as shown: *A trademark of Raychem Corporation. Raychem THERMOFIT DEVICES Raychem Corporation 300 Constitution Drive Menlo Park, CA 94025 USA UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. Raychem reserves the right to amend this ANGLES: N/A TOLERANCES: drawing at any time. Users should evaluate 0.00 N/A the suitability of the product for their ROUGHNESS IN 0.0 N/A application. MICRON 0 N/A TITLE: SOLDERSLEEVE*DEVICE SHIELD TERMINATION LOW TEMPERATURE DOCUMENT NO.: SLT-YX/1YX DCR NUMBER: REPLACES: D981081 DRAWN BY: DATE: REV.: DOC ISSUE: R. MAPALO 07-06-98 SEE TABLE 1 If this document is printed it becomes uncontrolled. Check for the latest revision SCALE: NONE slt3x, slt5x, slt6x, slt7x, slt12x & slt14x SIZE: A SHEET: 1 of 1