MACOM S02-03-R

SPECIFICATION CONTROL DRAWING
Product Name
Product Dimensions
Product Rev.
20 AWG
S02-01-R
D
Product Rev.
22 AWG
S02-06-R
D
Product Rev.
24 AWG
S02-11-R
D
S02-02-R
D
S02-07-R
D S02-12-R
D
S02-03-R
D
S02-08-R
D S02-13-R
D
S02-04-R
D
S02-09-R
D S02-14-R
D
S02-05-R
D
S02-10-R
D S02-15-R
D
Product Rev.
A1.75
26 AWG
(A0.07)
S02-16-R
D
16.5
(0.650)
S02-17-R
D
16.5
(0.650)
S02-18-R
D
16.5
(0.650)
S02-19-R
D
19.1
(0.750)
S02-20-R
D
19.1
(0.750)
øB
min
1.90
(0.075)
2.65
(0.105)
4.30
(0.170)
5.95
(0.235)
7.00
(0.275)
øC
min
2.65
(0.105)
3.68
(0.145)
5.08
(0.200)
6.45
(0.255)
7.60
(0.300)
Cable Dimensions
H
min
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
8.25
(0.325)
øE
max
2.65
(0.105)
3.68
(0.145)
5.08
(0.200)
6.45
(0.255)
7.60
(0.300)
øF
min
0.90
(0.035)
1.40
(0.055)
2.15
(0.085)
3.30
(0.130)
4.30
(0.170)
øG
min
0.50
(0.020)
0.75
(0.030)
1.25
(0.050)
1.80
(0.070)
2.50
(0.100)
øD
max
1.90
(0.075)
2.65
(0.105)
4.30
(0.170)
5.95
(0.235)
7.00
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX:
TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Color change: violet to colorless.
3. MELTABLE RING: Environment resistant thermoplastic. Color:blue.
4. GROUND LEAD: MIL-W-22759/32-AA-90 lead gauge per table.
APPLICATION
1. These parts are designed to provide an environment resistant shield termination on cables meeting the following criteria:
Dimensions: Per table.
Jacket rating: 125C.
Shield plating: Tin or silver.
Jacket material: See M83519/2 or consult Raychem.
2. Parts are qualified to M83519/2.
3. For assembly information, refer to Raychem document RCPS-100-70.
For best results, prepare
the cable as shown:
* A trademark of TE Connectivity.
TE Connectivity
300 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES:
ANGLES:
TE Connectivity reserves the right to
0.00 N/A
N/A
amend this drawing at any time. Users
0.0 N/A
should evaluate the suitability of the
0 N/A
ROUGHNESS
product for their application.
IN MICRON
DRAWN BY:
CAGE CODE:
REPLACES:
DCR NUMBER:
M. FORONDA
06090
D970095
D981342
TITLE:
SOLDERSLEEVE* SHIELD TERMINATOR,
IMMERSION RESISTANT, MIL-S-83519/2
DOCUMENT NO:
S02-XX-R
DATE:
DOC ISSUE:
16-Apr-11
PROD. REV.:
4
SCALE:
SEE TABLE
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
None
SIZE:
A
SHEET:
1 of 1
J0.5
(J0.02)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)
7.5
(0.295)