ONSEMI NCN2411

NCN2411
4-Channel Differential 1:2
Mux/Demux Switch for
PCI Express Gen2
The NCN2411 is a 4−Channel differential SPDT switch designed to
route PCI Express Gen2 signals. When used in a PCI Express
application, the switch can handle up to two PCIe lanes. Due to the
ultra−low ON−state capacitance (2 pF typ) and resistance (7.5 W typ),
this switch is ideal for switching high frequency signals up to a signal
bit rate (BR) of 5 Gbps. This switch pinout is designed to be used in
BTX form factor desktop PCs and is available in a space−saving
3.5x9x0.75 mm WQFN42 package.
http://onsemi.com
MARKING
DIAGRAM
1
Features
•
•
•
•
•
•
•
•
•
•
•
•
NCN2411
AWLYYWWG
WQFN42
CASE 510AP
VDD Power Supply from 1.5 V to 2.0 V
4 Differential Channels 2:1 MUX/DEMUX
Compatible with PCIe 2.0
Data Rate: Supports 5 Gbps
Low Crosstalk: −30 dB @ 3 GHz
Low Bit−to−Bit Skew: 5 ps
Low RON Resistance: 13 W max
Low CON Capacitance: 2 pF
Low Supply Current: 200 mA
Insertion Loss: −2 dB @ 3 GHz
Space Saving, Small WQFN−42 Package
This is a Pb−Free Device
A
WL
YY
WW
G
= Assembly Location
= Wafer Lot
= Year
= Work Week
= Pb−Free Package
ORDERING INFORMATION
Device
NCN2411MTTWG
Package
Shipping†
WQFN42 2000 / Tape & Reel
(Pb−Free)
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specifications
Brochure, BRD8011/D.
Typical Applications
• Notebook Computer
• Desktop computer
• Server/Storage Area Network
PCIe Slot
B0 +/−
B1 +/−
A0 +/−
PCI Express
Controller
A2 +/−
B2 +/−
NCN2411
A3 +/−
B3 +/−
C0 +/−
PCIe Slot
A1 +/−
C1 +/−
C2 +/−
C3 +/−
Figure 1. Application Schematic
© Semiconductor Components Industries, LLC, 2011
August, 2011 − Rev. 0
1
Publication Order Number:
NCN2411/D
NCN2411
A0+
B0+
A0−
B0−
A1+
B1+
A1−
B1−
C0+
C0−
C1+
C1−
A2+
B2+
A2−
B2−
A3+
B3+
A3−
B3−
C2+
C2−
C3+
C3−
SEL
Figure 2. NCN2411 Functional Block Diagram
(Top View)
TRUTH TABLE
Function
SEL
AN to BN
L
AN to CN
H
http://onsemi.com
2
VDD
GND
VDD
GND
42
41
40
39
NCN2411
GND
1
38
B0+
A0+
2
37
B0−
A0−
3
36
B1+
GND
4
35
B1−
VDD
5
34
C0+
A1+
6
33
C0−
A1−
7
32
C1+
VDD
8
31
C1−
SEL
9
30
VDD
GND
10
29
B2+
A2+
11
28
B2−
A2−
12
27
B3+
VDD
13
26
B3−
GND
14
25
C2+
A3+
15
24
C2−
A3−
16
23
C3+
GND
17
22
C3−
Exposed Pad
on
Underside
20
21
VDD
GND
19
GND
VDD
18
(Connect to Gnd)
Figure 3. Pin Description
(Top View)
http://onsemi.com
3
NCN2411
PIN FUNCTION AND DESCRIPTION
Pin
Pin Name
2, 3
A0+, A0−
Signal I/0, Channel 0, Port A
Description
6, 7
A1+, A1−
Signal I/0, Channel 1, Port A
11, 12
A2+, A2−
Signal I/0, Channel 2, Port A
15, 16
A3+, A3−
Signal I/0, Channel 3, Port A
38, 37
B0+, B0−
Signal I/0, Channel 0, Port B
36, 35
B1+, B1−
Signal I/0, Channel 1, Port B
29, 28
B2+, B2−
Signal I/0, Channel 2, Port B
27, 26
B3+, B3−
Signal I/0, Channel 3, Port B
34, 33
C0+, C0−
Signal I/0, Channel 0, Port C
32, 31
C1+, C1−
Signal I/0, Channel 1, Port C
25, 24
C2+, C2−
Signal I/0, Channel 2, Port C
23, 22
C3+, C3−
Signal I/0, Channel 3, Port C
9
SEL
Operational Mode Select (When SEL = 0: A → B, When SEL = 1: A → C) Do not float this pin.
5, 8, 13, 18,
20, 30, 40, 42
VDD
DC Supply: 1.5 V to 2.0 V
1, 4, 10, 14,
17, 19, 21,
39, 41
GND
Power Ground
Exposed Pad
−
The exposed pad on the backside of package is internally connected to GND. Externally the pad should
also be user−connected to GND.
MAXIMUM RATINGS
Parameter
Power Supply Voltage
Input/Output Voltage Range of the Switch (AN, BN, CN)
Symbol
Rating
Units
VDD
−0.5 to 2.5
VDC
VIS
−0.5 to VDD
VDC
VSEL
−0.5 to VDD
VDC
Continuous Current Through One Switch
Icc
±120
mA
Maximum Junction Temperature (Note 1)
TJ
150
°C
Operating Ambient Temperature
TA
−40 to +85
°C
Storage Temperature Range
Tstg
−65 to +150
°C
Thermal Resistance, Junction−to−Air
RqJA
75
°C/W
ILU
±100
mA
Human Body Model (HBM) ESD Rating (Note 3)
ESD HBM
7000
V
Machine Model (MM) ESD Rating (Note 3)
ESD MM
400
V
MSL
Level 1
−
Selection Pin Voltages
Latch−up Current (Note 2)
Moisture Sensitivity (Note 4)
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded.
2. Latch up Current Maximum Rating: ±100 mA per JEDEC standard: JESD78.
3. This device series contains ESD protection and passes the following tests:
Human Body Model (HBM) ±7.0 kV per JEDEC standard: JESD22−A114 for all pins.
Machine Model (MM) ±400 V per JEDEC standard: JESD22−A115 for all pins.
4. Moisture Sensitivity Level (MSL): 1 per IPC/JEDEC standard: J−STD−020A.
http://onsemi.com
4
NCN2411
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE (TA = −40°C to +85°C, VDD = 1.5 V to 2.0 V, GND = 0V)
Symbol
Pins
Parameters
Conditions (Note 5)
Min.
Typ
(Note 6)
Max.
Units
1.5
1.8
2.0
V
200
300
mA
1.2
V
POWER SUPPLY
VDD
VDD, GND
Supply Voltage Range
With respect to GND
IDD
VDD, GND
Quiescent Supply Current
VDD = 2 V, VSEL = GND or VDD
DATA SWITCH PERFORMANCE
VIS
AN, BN, CN
Data Input/Output
Voltage Range
0
RON
BN
On Resistance (BN)
VDD = 1.5 V, VIS = 0 V to 1.2 V,
IIS = 15 mA
7.5
13
W
RON
CN
On Resistance (CN)
VDD = 1.5 V, VIS = 0 V to 1.2 V,
IIS = 15 mA
8.0
13
W
RON(flat)
BN
On Resistance Flatness
VDD = 1.5 V, VIS = 0 V to 1.2 V,
IIS = 15 mA (Note 7)
0.1
1.24
W
RON(flat)
CN
On Resistance Flatness
VDD = 1.5 V, VIS = 0 V to 1.2 V,
IIS = 15 mA (Note 7)
0.1
1.24
W
DRON
BN
On Resistance
Matching(BN)
VDD = 1.5 V, VIS = 0 V,
IIS = 15 mA (Note 7)
0.35
W
DRON
CN
On Resistance
Matching(CN)
VDD = 1.5 V, VIS = 0 V,
IIS = 15 mA (Note 7)
0.35
W
CON
AN to BN,
AN to CN
On Capacitance
f = 1 MHz, Switch On, Open
Output
2.0
pF
COFF
AN to BN,
AN to CN
Off Capacitance
f = 1 MHz, Switch Off
1.5
pF
ION
AN to BN,
AN to CN
On Leakage Current
VDD = 2 V, VAN = 0 V, 1.2 V, Switch
On to BN/CN, BN/CN pins are
unconnected
−1
+1
mA
IOFF
AN to BN,
AN to CN
Off Leakage Current
VDD = 2 V, VAN = 0 V, 1.2 V, Switch
Off to BN/CN, VBN/VCN = 1.2 V, 0 V
−1
+1
mA
LOGIC INPUT CHARACTERISTICS (SEL Pin)
VIH
SEL
Input HIGH Voltage
(Note 7)
0.65 x
VDD
VDD
V
VIL
SEL
Input LOW Voltage
(Note 7)
0
0.35 x
VDD
V
VIK
SEL
Clamp Diode Voltage
VDD = Max, ISEL = −18mA
−1.2
V
IIH
SEL
Input HIGH Current
VDD = Max, VSEL = VDD
±5
mA
IIL
SEL
Input LOW Current
VDD = Max, VSEL = GND
±5
mA
−0.7
SWITCHING CHARACTERISTICS
tSELON
SEL, AN,
BN/CN
Line Enable Time
SEL to AN, BN, CN
RL = 50 W, CL = 20 pF
8.0
ns
tSELOFF
SEL, AN,
BN/CN
Line Disable Time
SEL to AN, BN, CN
RL = 50 W, CL = 20 pF
5.0
ns
tb−b
AN, BN/CN
Bit−to−bit skew
Within the same differential pair
9.0
ps
tch−ch
AN, BN
Channel−to channel skew
Maximum skew between all
channels
50
ps
5. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
6. Typical values are at VDD = 1.8 V, TA = 25°C ambient and maximum loading.
7. Guaranteed by design and/or characterization.
http://onsemi.com
5
NCN2411
DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE (TA = −40°C to +85°C, VDD = 1.5 V to 2.0 V, GND = 0V)
Symbol
Pins
Parameters
Conditions (Note 5)
Min.
Typ
(Note 6)
Max.
Units
DYNAMIC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE
BR
AN to BN,
AN to CN
Signal Bit Rate
DIL
AN to BN,
AN to CN
Differential Insertion Loss
DCTK
AN, BN, CN
Differential Crosstalk
DISO
AN to BN,
AN to CN
Differential Off Isolation
AN to BN,
AN to CN
Differential Return Loss
DRL
5.0
Gbps
f = 3 GHz
−2.0
dB
f = 100 MHz
−0.7
dB
f = 3 GHz
−30
dB
f = 100 MHz
−58
dB
f = 3 GHz
−23
dB
f = 100 MHz
−58
dB
f = 3 GHz
−6.0
dB
f = 100 MHz
−22
dB
5. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type.
6. Typical values are at VDD = 1.8 V, TA = 25°C ambient and maximum loading.
7. Guaranteed by design and/or characterization.
http://onsemi.com
6
NCN2411
TYPICAL OPERATING CHARACTERISTICS
0
−10
MAGNITUDE (dB)
−20
−30
−40
−50
−60
−70
−80
−90
100000000
1E+09
1E+10
FREQUENCY (Hz)
Figure 4. PCI Express Eye Diagram at 5 Gbps,
800 mVpp Differential Swing (Minimum Case)
Figure 5. Differential Off Isolation
0
0
−10
−4
−20
MAGNITUDE (dB)
MAGNITUDE (dB)
−30
−40
−50
−60
−70
−80
−8
−12
−16
−20
−24
−90
−28
−100
100000000
1E+09
1E+10
100000000
FREQUENCY (Hz)
Figure 6. Differential Crosstalk
Figure 7. Differential Return Loss
RON, ON RESISTANCE (W)
9
8.5
8
7.5
7
6.5
6
0
0.2
0.4
0.6
0.8
1
1E+09
FREQUENCY (Hz)
1.2
1.4
1.6
VIS (V)
Figure 8. RON vs. VIS
http://onsemi.com
7
1E+10
NCN2411
PARAMETER MEASUREMENT INFORMATION
Figure 9. Differential Insertion Loss (SDD21) and
Differential Return Loss (SDD11)
Figure 10. Differential Off Isolation (SDD21)
tskew = |tPLH1-tPLH2| or |tPHL1-tPHL2|
Figure 11. Differential Crosstalk (SDD21)
Figure 12. Bit−to−Bit and Channel−to−Channel Skew
Figure 13. tON and tOFF
Figure 14. Off State Leakage
Figure 15. On State Leakage
http://onsemi.com
8
NCN2411
PACKAGE DIMENSIONS
WQFN42 3.5x9, 0.5P
CASE 510AP−01
ISSUE O
PIN ONE
REFERENCE
ÇÇ
ÇÇ
ÇÇ
ÇÇ
ÇÇ
L
L
L1
DETAIL A
E
ALTERNATE TERMINAL
CONSTRUCTIONS
0.15 C
0.15 C
MOLD CMPD
DETAIL B
TOP VIEW
ALTERNATE
CONSTRUCTION
A
0.10 C
A3
DETAIL B
A1
SIDE VIEW
C
SEATING
PLANE
17
42X
9.30
42X
0.63
0.10 C A B
D2
MILLIMETERS
MIN
MAX
0.70
0.80
0.00
0.05
0.20 REF
0.20
0.30
3.50 BSC
1.95
2.15
9.00 BSC
7.45
7.65
0.50 BSC
0.20
−−−
0.30
0.50
0.00
0.15
RECOMMENDED
MOUNTING FOOTPRINT*
0.08 C
DETAIL A
DIM
A
A1
A3
b
D
D2
E
E2
e
K
L
L1
ÉÉ
ÉÉ
EXPOSED Cu
NOTE 4
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME
Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND 0.30 MM
FROM TERMINAL TIP.
4. COPLANARITY APPLIES TO THE EXPOSED PAD
AS WELL AS THE TERMINALS.
A B
D
0.50
PITCH
3.80 2.16
K
22
1
42X
L
0.35
PACKAGE
OUTLINE
DIMENSIONS: MILLIMETERS
42X b
0.10 C A B
0.05 C
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
E2
NOTE 3
1
38
0.10 C A B
e
e/2
BOTTOM VIEW
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
9
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCN2411/D