1N3879(R), 1N3889(R), 6/12/16FL(R) Series Vishay High Power Products Fast Recovery Diodes (Stud Version), 6/12/16 A FEATURES • Short reverse recovery time RoHS • Low stored charge COMPLIANT • Wide current range • Excellent surge capabilities • Standard JEDEC types • Stud cathode and stud anode versions • Fully characterized reverse recovery conditions DO-203AA (DO-4) • RoHS compliant TYPICAL APPLICATIONS • DC power supplies • Inverters PRODUCT SUMMARY IF(AV) • Converters 6/12/16 A • Choppers • Ultrasonic systems • Freewheeling diodes MAJOR RATINGS AND CHARACTERISTICS SYMBOL CHARACTERISTICS IF(AV) TC = 100 °C IF(RMS) 50 Hz IFSM I2 t 60 Hz 6FL.. 12FL.. 16FL.. UNITS 6 (1) 12 (1) 6 12 16 A 9.5 19 9.5 19 25 A 72 145 110 145 180 115 150 190 75 (1) 150 (1) A 26 103 60 103 160 60 Hz 23 94 55 94 150 363 856 1452 1452 2290 Range trr TJ 1N3889. TO 1N3893. 50 Hz I2√t VRRM 1N3879. TO 1N3883. Range 50 to 400 (1) 50 to 1000 A2s I2√s V See Recovery Characteristics table ns - 65 to 150 °C Note (1) JEDEC registered values Document Number: 93138 Revision: 26-Sep-08 For technical questions, contact: [email protected] www.vishay.com 1 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Vishay High Power Products Fast Recovery Diodes (Stud Version), 6/12/16 A ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 1N3879. 50 75 1N3880. 100 150 200 250 1N3882. 300 350 1N3883. 400 450 1N3889. 50 75 100 150 200 250 1N3892. 300 350 1N3893. 400 450 TYPE NUMBER VOLTAGE CODE - 1N3881. 1N3890. 1N3891. - 6FL.. 12FL.. 16FL.. 5 50 75 10 100 150 20 200 275 40 400 500 60 600 725 80 800 950 100 1000 1250 IRRM MAXIMUM AT TJ = 25 °C µA IRRM MAXIMUM AT TJ = 100 °C mA IRRM MAXIMUM AT TJ = 150 °C mA 15 (1) 1.0 (1) 3.0 (1) 25 (1) 3.0 (1) 5.0 (1) 50 - 6.0 Note (1) JEDEC registered values FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature Maximum RMS current IF(AV) TEST CONDITIONS 180° conduction, half sine wave DC IF(RMS) t = 10 ms Maximum peak, one-cycle non-repetitive forward current IFSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms Maximum for fusing Maximum forward voltage drop I2√t VFM 100 % VRRM reapplied No voltage reapplied Sinusoidal half wave, initial TJ = 150 °C 6FL.. 6 (1) 6 12 (1) 16 A 100 100 100 100 °C 9.5 9.5 19 25 85 130 170 215 90 135 180 225 72 110 145 180 75 (1) 115 150 (1) UNITS A 190 36 86 145 230 33 78 130 210 A2s 100 % VRRM reapplied 26 60 103 160 23 55 94 150 t = 0.1 to 10 ms, no voltage reapplied 363 856 1452 2290 A2√s TJ = 25 °C; IF = Rated IF(AV) (DC) 1.4 (1) 1.4 1.4 (1) 1.4 V TC = 100 °C; IFM = π x rated IF(AV) 1.5 (1) 1.5 1.5 (1) 1.5 V t = 8.3 ms I2√t No voltage reapplied 1N3889. 1N3893. 16FL.. 12FL.. 1N3879. 1N3883. Note (1) JEDEC registered values www.vishay.com 2 For technical questions, contact: [email protected] Document Number: 93138 Revision: 26-Sep-08 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Fast Recovery Diodes (Stud Version), 6/12/16 A Vishay High Power Products RECOVERY CHARACTERISTICS PARAMETER Maximum reverse recovery time Maximum peak recovery current Maximum reverse recovery charge SYMBOL trr IRM(REC) Qrr 6FL.. 12FL.. 16FL.. 1N3879. 1N3889. 1N3883. 1N3893. TEST CONDITIONS TJ = 25 °C, IF = 1 A to VR = 30 V, dIF/dt = 100 A/µs TJ = 25 °C, dIF/dt = 25 A/µs, IFM = π x rated IF(AV) 150 150 UNITS S02 S05 - - IFM ns 300 (1) 300 (1) 200 trr 500 IFM = π x rated IF(AV) 4 (1) 5 (1) TJ = 25 °C, IF = 1 A to VR = 30 V, dIF/dt = 100 A/µs 400 350 - - TJ = 25 °C, dIF/dt = 25 A/µs, IFM = π x rated IF(AV) 400 400 - - - t dir dt - Qrr IRM(REC) nC Note (1) JEDEC registered values THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum junction operating temperature range SYMBOL TEST CONDITIONS 1N3879. 1N3883. 6FL.. 1N3889. 1N3893. 12FL.. TJ - 65 to 150 Maximum storage temperature range TStg - 65 to 175 Maximum thermal resistance, junction to case RthJC DC operation Maximum thermal resistance, case to heatsink RthCS Mounting surface, smooth, flat and greased 16FL.. UNITS °C 2.5 2.0 °C/W 0.5 Not lubricated threads 1.5 + 0 - 10 % (13) Lubricated threads 1.2 + 0 - 10 % (10) Allowable mounting torque 1.6 N·m (lbf · in) 7 g 0.25 oz. Approximate weight Case style Document Number: 93138 Revision: 26-Sep-08 JEDEC For technical questions, contact: [email protected] DO-203AA (DO-4) www.vishay.com 3 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Vishay High Power Products Fast Recovery Diodes (Stud Version), 6/12/16 A ΔRthJC CONDUCTION CONDUCTION ANGLE 1N3879. 1N3883. 6FL.. 1N3889. 1N3893. 12FL.. 16FL.. SINUSOIDAL CONDUCTION 1N3879. 1N3883. 6FL.. 1N3889. 1N3893. 12FL.. 16FL.. TEST CONDITIONS UNITS TJ = 150 °C K/W RECTANGULAR CONDUCTION 180° 0.58 0.46 0.37 0.33 0.26 0.21 120° 0.60 0.48 0.39 0.58 0.46 0.37 60° 1.28 1.02 0.82 1.28 1.02 0.82 30° 2.20 1.76 1.41 2.20 1.76 1.41 Note • The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC www.vishay.com 4 Fig. 1 - Average Forward Current vs. Maximum Allowable Case Temperature, 1N3879 and 6FL Series Fig. 3 - Average Forward Current vs. Maximum Allowable Case Temperature, 16FL Series Fig. 2 - Average Forward Current vs. Maximum Allowable Case Temperature, 1N3889 and 12FL Series Fig. 4 - Reverse Recovery Time Test Waveform For technical questions, contact: [email protected] Document Number: 93138 Revision: 26-Sep-08 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Fast Recovery Diodes (Stud Version), 6/12/16 A Vishay High Power Products Fig. 5 - Current Rating Nomogram (Sinusoidal Waveforms), 1N3879 and 6FL Series Fig. 6 - Current Rating Nomogram (Rectangular Waveforms), 1N3879 and 6FL Series Fig. 7 - Current Rating Nomogram (Sinusoidal Waveforms), 1N3889 and 12FL Series Document Number: 93138 Revision: 26-Sep-08 For technical questions, contact: [email protected] www.vishay.com 5 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Vishay High Power Products Fast Recovery Diodes (Stud Version), 6/12/16 A Fig. 8 - Current Rating Nomogram (Rectangular Waveforms), 1N3889 and 12FL Series Fig. 9 - Current Rating Nomogram (Sinusoidal Waveforms), 16FL Series Fig. 10 - Current Rating Nomogram (Rectangular Waveforms), 16FL Series www.vishay.com 6 For technical questions, contact: [email protected] Document Number: 93138 Revision: 26-Sep-08 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Fast Recovery Diodes (Stud Version), 6/12/16 A Vishay High Power Products Fig. 11 - Maximum Forward Voltage vs. Forward Current, 1N3879 and 6FL Series Fig. 14 - Maximum High Level Forward Power Loss vs. Average Forward Current, 1N3889 and 12FL Series Fig. 12 - Maximum High Level Forward Power Loss vs. Average Forward Current, 1N3879 and 6FL Series Fig. 15 - Maximum Forward Voltage vs. Forward Current, 16FL Series Fig. 13 - Maximum Forward Voltage vs. Forward Current, 1N3889 and 12FL Series Document Number: 93138 Revision: 26-Sep-08 Fig. 16 - Maximum High Level Forward Power Loss vs. Average Forward Current, 16FL Series For technical questions, contact: [email protected] www.vishay.com 7 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Vishay High Power Products Fast Recovery Diodes (Stud Version), 6/12/16 A Fig. 17a - Typical Reverse Recovery Time vs. Rate of Fall of Forward Current, All Series ...S02 Fig. 18b - Typical Recovered Charge vs. Rate of Fall of Forward Current, All Series ...S05 Fig. 17b - Typical Recovered Charge vs. Rate of Fall of Forward Current, All Series ...S02 Fig. 19a - Typical Reverse Recovery Time vs. Rate of Fall of Forward Current, All Series ...S10 Fig. 18a - Typical Reverse Recovery Time vs. Rate of Fall of Forward Current, All Series ...S05 www.vishay.com 8 Fig. 19b - Typical Recovered Charge vs. Rate of Fall of Forward Current, All Series ...S10 For technical questions, contact: [email protected] Document Number: 93138 Revision: 26-Sep-08 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Fast Recovery Diodes (Stud Version), 6/12/16 A Vishay High Power Products Fig. 20 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 1N3879 Series Fig. 22 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 1N3889 and 12FL Series Fig. 21 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 6FL Series Fig. 23 - Maximum Non-Repetitive Surge Current vs. Number of Current Pulses, 16FL Series Fig. 24 - Maximum Transient Thermal Impedance, Junction to Case vs. Pulse Duration, All Series Document Number: 93138 Revision: 26-Sep-08 For technical questions, contact: [email protected] www.vishay.com 9 1N3879(R), 1N3889(R), 6/12/16FL(R) Series Vishay High Power Products Fast Recovery Diodes (Stud Version), 6/12/16 A ORDERING INFORMATION TABLE Device code 16 F L R 60 M S02 1 2 3 4 5 6 7 1 - Current code I(AVG) = Exact current rating 2 - F = Diode 3 - Omit = Standard recovery diode L = Only for fast diode 4 - Omit = Stud forward polarity R = Stud reverse polarity 5 - Voltage code x 10 = VRRM (see Voltage Ratings table) 6 - Outlines: Omit = Stud base UNF thread M = Stud base metric thread 7 - trr code only for fast diode (see Recovery Characteristics table) LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com 10 http://www.vishay.com/doc?95311 For technical questions, contact: [email protected] Document Number: 93138 Revision: 26-Sep-08 Outline Dimensions Vishay Semiconductors DO-203AB (DO-5) for 40HFL, 70HFL and 85HFL DIMENSIONS FOR 40HFL/70HFL in millimeters (inches) Ø 14.6 (0.57) 6.1/7 (0.24/0.27) 4 (0.16) 4 (0.16) MIN. 25.4 (1) MAX. 10.8 (0.42) 11.4 (0.45) 11.1 ± 0.4 (0.44 ± 0.02) 1/4" 28UNF-2A for metric devices: M6 x 1 1.20 (0.04) Document Number: 95312 Revision: 29-Sep-08 17.40 (0.68) For technical questions, contact: [email protected] www.vishay.com 1 Outline Dimensions Vishay Semiconductors DO-203AB (DO-5) for 40HFL, 70HFL and 85HFL DIMENSIONS FOR 85HFL in millimeters (inches) Ø 15 (0.59) 6.1/7 (0.24/0.27) 4 (0.16) 4 (0.16) MIN. 25.4 (1) MAX. 10.8 (0.42) 11.4 (0.45) 11.1 ± 0.4 (0.44 ± 0.02) 1/4" 28UNF-2A for metric devices: M6 x 1 1.20 (0.04) www.vishay.com 2 17.35 (0.68) For technical questions, contact: [email protected] Document Number: 95312 Revision: 29-Sep-08 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000