Series AM2D-RZ 2 Watt | DC-DC Converter FEATURES: RoHS Compliant High efficiency up to 89% Low ripple and noise 7 pin SIP package Operating temperature -40oC to +85oC Pin compatible with multiple manufacturers Input / Output Isolation 1000, 3000 VDC Non-Conductive Plastic Case Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) AM2D-0505S-RZ AM2D-0509S-RZ AM2D-0512S-RZ AM2D-0515S-RZ AM2D-1205S-RZ AM2D-1209S-RZ AM2D-1212S-RZ AM2D-1215S-RZ AM2D-1505S-RZ AM2D-1509S-RZ AM2D-1512S-RZ AM2D-1515S-RZ AM2D-2405S-RZ AM2D-2409S-RZ AM2D-2412S-RZ AM2D-2415S-RZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 400 222 167 134 400 222 167 134 400 222 167 134 400 222 167 134 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 81 85 85 86 84 86 88 88 85 87 87 88 82 84 86 87 AM2D-0505SH30-RZ AM2D-0509SH30-RZ AM2D-0512SH30-RZ AM2D-0515SH30-RZ AM2D-1205SH30-RZ AM2D-1209SH30-RZ AM2D-1212SH30-RZ AM2D-1215SH30-RZ AM2D-1505SH30-RZ AM2D-1509SH30-RZ AM2D-1512SH30-RZ AM2D-1515SH30-RZ AM2D-2405SH30-RZ AM2D-2409SH30-RZ AM2D-2412SH30-RZ AM2D-2415SH30-RZ 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 5 9 12 15 5 9 12 15 5 9 12 15 400 222 167 134 400 222 167 134 400 222 167 134 400 222 167 134 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 81 85 85 86 84 86 88 88 85 87 87 88 82 84 86 87 Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 1000 1000 1000 1000 1000 1000 1000 1000 82 85 86 87 84 88 89 89 Model Models Dual output Model AM2D-0505D-RZ AM2D-0509D-RZ AM2D-0512D-RZ AM2D-0515D-RZ AM2D-1205D-RZ AM2D-1209D-RZ AM2D-1212D-RZ AM2D-1215D-RZ www.aimtec.com F 051e R12 Tel: +1 514 620 2722 1 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2D-RZ 2 Watt | DC-DC Converter Models Dual output (continued) Model Input Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Efficiency (%) 13.5-16.5 13.5-16.5 13.5-16.5 13.5-16.5 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 ±5 ±9 ±12 ±15 ±5 ±9 ±12 ±15 ±200 ±111 ±83 ±67 ±200 ±111 ±83 ±67 1000 1000 1000 1000 1000 1000 1000 1000 85 88 88 88 82 85 86 87 AM2D-1505D-RZ AM2D-1509D-RZ AM2D-1512D-RZ AM2D-1515D-RZ AM2D-2405D-RZ AM2D-2409D-RZ AM2D-2412D-RZ AM2D-2415D-RZ AM2D-0505DH30-RZ 4.5-5.5 ±5 ±200 3000 82 AM2D-0509DH30-RZ 4.5-5.5 ±9 ±111 3000 85 AM2D-0512DH30-RZ 4.5-5.5 ±12 ±83 3000 86 AM2D-0515DH30-RZ 4.5-5.5 ±15 ±67 3000 87 AM2D-1205DH30-RZ 10.8-13.2 ±5 ±200 3000 84 AM2D-1209DH30-RZ 10.8-13.2 ±9 ±111 3000 88 AM2D-1212DH30-RZ 10.8-13.2 ±12 ±83 3000 89 AM2D-1215DH30-RZ 10.8-13.2 ±15 ±67 3000 89 AM2D-1505DH30-RZ 13.5-16.5 ±5 ±200 3000 85 AM2D-1509DH30-RZ 13.5-16.5 ±9 ±111 3000 88 AM2D-1512DH30-RZ 13.5-16.5 ±12 ±83 3000 88 AM2D-1515DH30-RZ 13.5-16.5 ±15 ±67 3000 88 AM2D-2405DH30-RZ 21.6-26.4 ±5 ±200 3000 82 AM2D-2409DH30-RZ 21.6-26.4 ±9 ±111 3000 85 AM2D-2412DH30-RZ 21.6-26.4 ±12 ±83 3000 86 AM2D-2415DH30-RZ 21.6-26.4 ±15 ±67 3000 87 NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Input Specifications Parameters Voltage range Nominal Typical 5 12 15 24 Filter Absolute Maximum Rating Maximum 4.5-5.5 10.8-13.2 13.5-16.5 21.6-26.4 Capacitor 5 Vin 12 Vin 15 Vin 24 Vin VDC 9 18 20 30 100 Peak Input Voltage time No Load Input Current Units VDC ms mA 50 Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec Maximum Units 1000, 3000 VDC MOhm pF Maximum Units >1000 60 Output Specifications Parameters Voltage accuracy Short Circuit protection Line voltage regulation www.aimtec.com F 051e R12 Conditions Typical +2, -4 Momentary (1sec). 1.2 For 1.0% of Vin Tel: +1 514 620 2722 2 of 5 % % of Vin Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2D-RZ 2 Watt | DC-DC Converter Output Specifications (continued) Parameters Load voltage regulation Temperature coefficient Ripple & Noise Minimum Load Current Conditions Typical Load 10~100% Maximum ±5 ±0.02 50 10 20MHz Bandwidth Units % %/oC mV p-p % of Max General Specifications Parameters Conditions Switching frequency Operating temperature Storage temperature Maximum case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Maximum soldering temperature 100% load Typical Maximum Units 100 KHz o C o C o C 70 -40 to +85 -40 to +125 Free Air Convection 95 Plastic UL94V-0 2.8 0.76 x 0.28 x 0.39 inch 19.50 x 7.20 x 10.00 mm >1.9 Mhrs (MIL-HDBK -217F, Ground Benign, t=+25oC)hours 1.5mm from case for 10 sec 260 % RH g o C Safety Specifications Parameters Agency Approval CE EN55022: 2006 + A1: 2007, Class B EN55024: 1998 + A1: 2001 + A2:2003 IEC61000-4-2:2008 IEC61000-4-3: 2006 + A1: 2007 IEC61000-4-4, 2004 IEC61000-4-6: 2008 IEC61000-4-8: 1993 + A1:2000 Standards Pin Out Specifications Pin 1 2 4 5 6 7 1000 VDC Single + V Input - V Input - V Output No pin + V Output No pin www.aimtec.com F 051e R12 Dual + V Input - V Input - V Output Common + V Output No pin 3000 VDC Single + V Input - V Input No pin -V Output No pin +V Output Dual + V Input - V Input No pin -V Output Common +V Output Tel: +1 514 620 2722 3 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2D-RZ 2 Watt | DC-DC Converter Dimensions Application Circuit Input Voltage (VDC) 5 12 15 24 www.aimtec.com F 051e R12 C1 2.2uF/100V 2.2uF/100V 2.2uF/100V 2.2uF/100V L 18uH 18uH 18uH 18uH C2 C3 N/A N/A N/A 2.2uF/100V N/A N/A N/A 470pF/2KV Tel: +1 514 620 2722 4 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM2D-RZ 2 Watt | DC-DC Converter Conducted Emissions EFT NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R12 Tel: +1 514 620 2722 5 of 5 Toll free: + 1 888 9 AIMTEC (924 6832) North America only