POWERDYNAMICS PB01S-60

PB Series STRAIGHT, SNAP-IN/FLANGE MOUNT FILTER WITH IEC 60320
AC INLET SOCKET.
MECHANICAL DIMENSIONS (Unit: mm)
FLANGE MOUNT
50.1
40.0
30.3
28.5
4-R5
22.5
21.6
240.0
3.3
45.5
3.5
SUGGESTED PANEL CUTOUT
(MOUNTING FROM FRONT)
41.4
46.8
55.8
G
20.6
28.3
SNAP-IN (SNT)
FEATURES
31.0
The PB series, similar to PA and PASP series, offers filters with
IEC connector providing effective equipment protection of
line-to-ground noise up to 15 Amp, 250VAC. The compact
design filter with low leakage current is well suited for
applications that require strict national and international
emission standards. These filters are also available for
Medical application and offer extremely low Leakage current
to comply with UL544, UL2601 and CSA22.2 standards.
A ground choke can be added to enhance the grounding
ability of the circuit. Bleeder resistor can also be added to
prevent excessive voltages from developing across the filter
capacitors when there is no load.
24.0
4-R2
28.5
29.6
SUGGESTED PANEL CUTOUT** SUGGESTED PANEL CUTOUT**
(MOUNTING FROM FRONT)
(MOUNTING FROM FRONT)
SNT Option
SSI Option
3.75
55.2
43.6
20.6
28.3
FLANGE MOUNT (B)
52
TECHNICAL DATA
40.0
40
• Rated Voltage: 115/250VAC
• Rated Current: 1A, 2A, 3A, 6A, 8A, 10A, 15A
• Power Line Frequency: 50/60Hz
• Max. Leakage Current each
Line to Ground:
@ 115VAC 60Hz: 0.25mA
@ 250VAC 50Hz: 0.45mA
@ 115VAC 60Hz: 2µA*
@ 250VAC 50Hz: 5µA*
• Hipot Rating (one minute)
Line to Ground: 2250VDC
Line to Line: 1450VDC
• Temperature Range: -25C to +85C
* Medical application; ** Thickness of Panel is from 1.00mm to 1.6mm
8
21.2
4-R2
APPLICATIONS
Computer & networking equipment, Measuring & control
equipment, Data processing equipment, laboratory instruments,
Switching power supplies, other electronic equipment.
21.9
28.5
4-R5
21.6
25
2-
30.3
3.3
45.5
3.5
SUGGESTED PANEL CUTOUT
(MOUNTING FROM FRONT)
41.4
46.8
55.8
G
28.3
20.6
Specifications subject to change without notice. Dimensions (mm). See Appendix A for
recommended power cord. See PDI full line catalog for detailed specifications on power cords.
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076
e-mail: [email protected] • www.powerdynamics.com
PB Series Example & Ordering Code
C
SCHEMATICS
01
02
03
06
08
10
15*
1
L mH
L
LINE
=
=
=
=
=
=
=
CURRENT RATING (A):
Q - 50 - 1
R
Cy
CX
L
Cy
N
L'
G'
LOAD
PB 01
N'
L mH
G
Lg
4.0/0.187
8.0
2.0 -3.0L
6.6
UL 1015, 18AWG
STRANDED, 4”
QUICK CONNECT
2
=Q
SOLDER
=S
WIRE
=W
L mH
L
Cy
R
L
Cy
N
L'
G'
LOAD
6.3/0.25
3.0 -3.6L
LINE
TERMINAL:
N'
L mH
G
Lg
3
Inductance Per Current Rating
2A
3A
6A
3.8
2.5
0.8
1.5
1.1
0.6
2.7
1.8
0.8
4.2
2.5
1.05
3.4
2.5
0.9
4.3
1.8
0.85
4.0
1.2
0.53
3.7
1.8
0.6
6.5
2.5
1.05
4.0
2.5
0.8
4.0
2.5
0.8
(mH)
8A
1.05
✘
1.05
✘
✘
✘
✘
✘
✘
1.05
1.05
Lg
1
2✢
3✢
4✢
1M
2M✢
4
10A
0.2
0.3
0.3
0.3
0.3
0.3
0.3
0.2
0.3
0.3
0.3
15A
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
0.2
Inductance Per Current Rating (mH)
2A
3A
6A
8A
3.8
2.5
0.8
1.05
✘
1.5
1.1
0.6
✘
✘
2.7
1.8
✘
3.4
2.5
0.9
✘
4.3
1.8
0.85
4.0
2.5
0.8
1.05
✘
4
1.2
0.53
✘
✘
3.7
0.6
10A
0.2
0.3
0.3
0.3
0.3
0.3
R
L'
L
N
N'
L mH
G
G'
Lg
=
=
=
=
=
=
=
=
=
=
=
A
B
C
D
E
F
G
H
I
J✢
K✢
MEDICAL
SCHEMATICS
1M
L mH
L
R
CX
L'
L
N
N'
L mH
G
G'
Lg
15A
0.2
0.2
✘
0.2
0.2
0.2
✘
✘
0.2
✘
=
=
=
=
=
=
=
=
M1
M2
M3
M4
M5
M6
M7
M8
2M
L mH
L
LINE
1A
6.5
1.9
3.7
4.6
9.5
6.5
10.5
5
L mH
L
Medical applications, select Attenuation code with corresponding component values from the table.
Cx
(µF)
0.1
0.015
0.1
0.047
0.033
0.22
0.047
0.033
N'
L mH
LOAD
=
=
=
=
=
=
LINE
1A
6.5
1.9
3.7
10.5
4.6
9.5
10.5
5.0
10.5
6.5
6.5
Cy
L'
G'
LOAD
STANDARD TYPE
WITHOUT C(X); C(Y) ONLY
C(X) & C(Y) BEHIND L
WITHOUT C(X) & C(Y)
WITHOUT C(Y); C(X) ONLY
WITHOUT C(Y); C(X) BEHIND L
Cy
CX
L
N
ATTENUATION CODE TABLE:
Non-Medical applications, select Attenuation code with corresponding component values from the table.
Cy
(pF)
2200
3300
3300
1000
3300
3300
2200
2200
without Cy
2200
3300
R
G
COMPONENT LOCATIONS:
Cx
(µF)
0.1
0.015
0.1
0.1
0.047
0.033
0.047
0.033
without Cx
0.22
0.22
L mH
L
LOAD
00
50✢✢
60
70✢✢
80
90
R
L
N
L'
LOAD
=
=
=
=
=
=
LINE
NO BLEEDER RESISTOR & GROUND CHOKE
BLEEDER RESISTOR (1/4 W, 1M)
BLEEDER RESISTOR (1/2 W, 1M)
BLEEDER RESISTOR (1/4 W, 1M) & GROUND CHOKE
BLEEDER RESISTOR (1/2 W, 1M) & GROUND CHOKE
GROUND CHOKE (100µH)
LINE
OPTIONS:
CX
N'
L mH
G
G'
Lg
Contact PDI for attenuation numbers
Contact PDI for availability
✢✢
N/A for 15A
*15A for UL, cUL; 10A for CE, VDE
✢
✘
TYPE OF MOUNTING:
STANDARD FLANGE MOUNT
= BLANK
SPECIAL FLANGE MOUNT
=B
SNAP-IN TABS - TOP BOTTOM
= SNT
SNAP-IN TABS - SIDE
= SSI
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076
e-mail: [email protected] • www.powerdynamics.com
9
PB Series Attenuation Tables
Non-Medical Applications❖
Medical Applications✧
Insertion loss in dB (50 Ohm circuit)
Insertion loss in dB (50 Ohm circuit)
Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz
Code
Rating
.15 .5 1 5 10 30 .15 .5 1 5 10 30
1A
34 38 40 32 26 11
8 25 37 71 62 12
2A
29 32 55 48 49 51
8 23 34 68 64 14
3A
28 36 39 45 48 39
8 19 27 58 65 15
6A
18 24 28 44 50 47
8 18 26 43 51 31
10A
8 14 18 33 41 39
8 18 25 29 38 31
15A
7 14 19 34 40 38
7 17 23 39 47 27
A
B
1A
2A
3A
6A
10A
15A
25
24
19
15
11
7
31
28
22
24
18
15
33
20
24
30
23
20
30
53
27
44
39
38
25
54
27
52
49
46
14
55
22
40
37
37
1
1
1
1
1
1
C
1A
2A
3A
6A
10A
15A
29
28
25
19
11
7
33
37
33
29
19
15
47
44
46
36
24
21
53
52
53
49
41
37
57
56
57
55
53
46
41
41
44
46
36
36
8
8
8
8
8
7
23
19
19
18
18
17
35
27
29
23
24
23
73
74
63
50
51
39
58
59
62
54
46
48
14
17
13
24
25
27
D
1A
2A
3A
6A
10A
15A
36
36
28
21
12
7
41
41
35
28
16
13
41
41
37
31
19
16
49
49
41
41
45
28
49
49
42
44
37
32
46
46
42
41
41
37
8
8
8
8
8
7
23
23
19
18
18
17
33
33
28
25
24
24
62
62
56
45
52
32
62
62
57
48
53
32
32
32
17
29
30
30
1A
2A
3A
6A
10A
15A
32
29
28
18
11
7
39
34
38
25
19
14
55
46
44
31
24
20
55
56
51
49
40
39
56
58
58
56
50
45
52
49
39
47
40
37
3
3
3
3
3
3
14
15
12
11
12
11
25
27
20
17
17
17
75
67
66
55
48
50
63
59
57
59
46
46
24
21
18
32
29
29
1A
2A
3A
6A
10A
15A
36
32
23
19
11
4
41
39
29
29
19
15
62
56
35
35
25
21
54
56
53
51
40
36
50
58
52
54
51
44
36
58
40
49
39
38
G
1A
2A
3A
6A
10A
15A
36
31
20
14
11
4
41
37
25
19
17
14
59
47
28
22
22
19
54
51
44
39
36
34
54
49
49
48
42
40
H
1A
2A
3A
6A
10A
15A
32
29
23
16
11
4
34
32
27
20
17
14
52
56
30
24
22
19
44
49
49
42
36
33
I
1A
2A
3A
6A
10A
15A
36
30
28
21
11
6
42
37
35
29
16
12
43
39
37
32
18
15
37
29
28
31
18
16
E
F
Attenuation Current Comm. Mode(L-G) in MHz Diff. mode(L-L) in MHz
Code
Rating
.15 .5 1 5 10 30 .15 .5 1 5 10 30
1A
34 38 39 32 16 21
9 26 37 62 51 11
2A
29 32 34 30 19 16
8 23 34 60 48 13
3A
28 35 37 28 22 19
8 19 28 52 44 12
6A
18 22 24 27 25 18
8 18 26 52 45 27
10A
8 13 15 17 16 14
8 18 25 32 28 24
15A
7 12 15 16 14 11
7 17 24 41 32 23
M1
M2
1A
2A
3A
6A
10A
15A
25
23
19
15
11
7
31
27
22
21
16
13
33
28
24
24
18
15
30
29
27
23
17
16
24
24
27
21
16
14
21
23
20
17
12
11
1
1
1
1
1
1
M3
1A
2A
3A
6A
10A
29
28
25
19
11
33
35
33
26
16
34
37
58
29
18
30
28
51
28
18
20
22
56
25
16
16
24
41
14
12
8
8
8
8
8
24
20
20
18
18
35
29
30
26
24
58
61
57
46
47
45
48
47
43
36
15
15
13
22
24
M4
1A
2A
3A
6A
10A
36
31
28
22
12
41
37
35
28
16
43
39
37
31
18
37
35
28
30
20
32
29
21
27
19
28
22
21
16
15
8
8
8
8
8
23
22
20
18
18
34
32
29
26
24
60
66
54
43
49
53
55
44
43
42
30
22
14
26
27
M5
1A
2A
3A
6A
10A
15A
32
29
28
18
11
7
37
33
35
23
16
13
40
34
37
25
18
15
35
30
28
27
18
16
29
16
22
26
17
14
23
21
23
20
14
11
3
3
3
3
3
3
15
16
13
12
11
11
25
27
22
19
17
17
74
57
59
48
42
43
58
50
48
49
38
30
21
20
16
30
27
22
1 11 22 64 70 29
1 10 21 76 62 23
1 9 17 66 65 33
2 8 13 47 57 28
2 9 14 46 51 29
1 8 14 50 46 26
M6
1A
2A
3A
6A
10A
15A
36
32
23
19
11
4
41
37
27
26
16
13
43
40
28
29
18
15
37
36
31
29
18
16
31
30
30
25
17
14
25
22
30
17
14
11
1 12 23 54 57 28
1 11 22 63 59 24
1 10 19 61 52 32
1 8 15 39 45 25
2 8 14 42 34 25
1 8 14 48 29 21
47
40
42
41
38
38
3
3
3
3
3
3
M7
1A
2A
3A
6A
10A
36
31
20
14
11
41
37
24
17
16
43
40
25
19
18
37
36
26
22
18
32
29
24
22
16
28
25
23
19
12
3
3
3
3
3
44
50
52
51
41
39
41
45
46
42
40
39
1 14 25 60 66 21
1 12 24 67 62 14
1 9 17 59 69 30
1 8 14 58 52 33
2 8 14 37 54 27
1 8 14 48 42 28
1A
2A
3A
6A
10A
32
29
23
16
11
36
33
26
19
16
37
34
28
21
18
28
31
31
24
18
19
20
30
24
17
11
17
31
21
14
1 14 26 53 42 16
1 13 24 61 50 14
1 9 19 54 53 29
2 8 15 56 38 33
2 8 14 41 34 25
31
22
22
27
17
15
36
27
31
17
14
11
1
1
1
1
1
1
4 12 50 64 16
4 13 53 57 16
3 8 48 59 31
4 8 36 52 28
4 8 26 46 24
4 8 25 48 28
15
14
12
11
11
12
2
1
1
1
1
1
26
24
19
17
17
17
5
3
2
1
1
1
68
69
61
48
39
38
17
14
11
7
5
1
71
63
57
50
55
42
23
21
18
12
3
3
32
26
27
33
27
28
M8
5 14 41 46 17
5 14 45 58 15
4 10 39 50 34
4 9 30 49 28
4 8 26 45 24
3 7 26 39 23
16
15
12
11
11
27
25
21
18
17
64
80
47
43
48
60
60
42
35
34
31
25
22
29
23
✧This
table applies to schematic 1M only.
Visit our website or contact PDI for other schematic attenuation numbers.
33
13
12
23
9
6
❖This
table applies to schematic 1 only.
Visit our website or contact PDI for other schematic attenuation numbers.
10
145 Algonquin Parkway, Whippany, NJ 07981 • 973-560-0019 • FAX: 973-560-0076
e-mail: [email protected] • www.powerdynamics.com