T97 www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT®, Hi-Rel COTS, Ultra-Low ESR, Conformal Coated Case FEATURES • High reliability; Weibull failure rate grading available • Surge current testing per MIL-PRF-55365 options available • Ultra-low ESR • Tin/lead (SnPb) termination available • Mounting: Surface mount • Compliant to RoHS Directive 2002/95/EC Note * Pb containing terminations are not RoHS compliant, exemptions may apply PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 °C to + 85 °C (To + 125 °C with voltage derating) Capacitance Range: 10 μF to 1500 μF Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 4 VDC to 75 VDC ORDERING INFORMATION T97 R 227 K 020 E S A TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 °C TERMINATION/ PACKAGING (available options are series dependent) RELIABILITY LEVEL SURGE CURRENT See Ratings and Case Code table This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). E = Sn/Pb solder/ 7" (178 mm) reel L = Sn/Pb solder/ 7" (178 mm), 1/2 reel C = 100 % tin/ 7" (178 mm), reel H = 100 % tin/ 7" (178 mm), 1/2 reel A = 1.0 % Weibull B = 0.1 % Weibull (1) S = 40 h burn-in Z = Nonestablished reliability A = 10 cycles at + 25 °C B = 10 cycles at - 55 °C/ + 85 °C S = 3 cycles at 25 °C Notes (1) Available on select ratings. See “Standard Ratings” table. • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. DIMENSIONS in inches [millimeters] J Tantalum wire nib identifies anode (+) terminal W L H D B A CASE CODE V D E R F Z M H N L (MAX.) 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.299 [7.6] 0.315 [8] 0.315 [8] 0.315 [8.0] W 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.173 ± 0.016 [4.4 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.238 ± 0.016 [6.0 ± 0.4] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.260 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] 0.259 + 0.016/- 0.024 [6.6 + 0.4/- 0.6] H 0.079 [2.0 max.] 0.138 [3.5 max.] 0.157 ± 0.016 [4.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.185 ± 0.016 [4.7 ± 0.4] 0.236 ± 0.016 [6.0 ± 0.4] 0.142 ± 0.016 [3.6 ± 0.4] 0.205 ± 0.016 [5.2 ± 0.4] 0.252 ± 0.016 [6.4 ± 0.4] A 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] 0.055 ± 0.016 [1.4 ± 0.4] 0.051 ± 0.012 [1.3 ± 0.3] 0.055 ± 0.016 [1.4 ± 0.4] 0.056 ± 0.017 [1.4 ± 0.4] B 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.181 ± 0.024 [4.6 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] 0.197 ± 0.024 [5.0 ± 0.6] 0.196 ± 0.025 [5.0 ± 0.6] D (REF.) 0.252 [6.4] 0.252 [6.4] 0.252 [6.4] 0.244 [6.2] 0.244 [6.2] 0.244 [6.2] 0.260 [6.6] 0.260 [6.6] 0.259 [6.6] J (MAX.) 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Note • The anode termination (D less B) will be a minimum of 0.012" [0.3 mm] Revision: 05-Dec-11 Document Number: 40092 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T97 www.vishay.com Vishay Sprague RATINGS AND CASE CODES μF 4V 6.3 V 10 15 22 33 47 68 100 150 220 330 V 470 V E 680 E E 1000 E/R R 1500 R Note (1) Contact factory for availability 10 V E E R F 16 V E F H 20 V R H/F 25 V 35 V R F F M 50 V 63 V D R F E/R R F Z/N R F F 75 V R (1) STANDARD RATINGS CAPACITANCE (μF) CASE CODE 470 680 1000 1000 1500 V E E R R 330 470 680 1000 V E E R 330 470 680 1000 E E R F 220 330 470 E F H 220 330 330 R F H 68 100 R F MAX. DF AT + 25 °C 120 Hz (%) 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C T97V477(1)004(2)(4)(5) 19 8 T97E687(1)004(2)(4)(5) 27 6 T97E108(1)004(2)(4)(5) 40 8 T97R108(1)004(2)(4)(5) 40 8 T97R158(1)004(2)(4)(5) 60 8 6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C T97V337(1)6R3(2)(4)(5) 21 8 T97E477(1)6R3(2)(4)(5) 30 6 T97E687(1)6R3(2)(4)(5) 43 6 T97R108(1)6R3(2)(4)(5) 63 8 10 VDC AT + 85 °C; 7 WVDC AT + 125 °C T97E337(1)010(2)(4)(5) 33 6 T97E477(1)010(2)(4)(5) 47 6 T97R687(1)010(2)(6)(5) 68 6 T97F108(1)010(2)(3)(5) 100 20 16 WVDC AT + 85 °C; 10 VDC AT + 125 °C T97E227(1)016(2)(4)(5) 35 8 T97F337(1)016(2)(4)(5) 53 10 T97H477(1)016(2)(4)(5) 75 14 20 VDC AT + 85 °C; 13 VDC AT + 125 °C T97R227(1)020(2)(4)(5) 44 8 T97F337(1)020(2)(6)(5) 66 10 T97H337(1)020(2)(4)(5) 66 10 25 VDC AT + 85 °C; 17 VDC AT + 125 °C T97R686(1)025(2)(4)(5) 17 6 T97F107(1)025(2)(4)(5) 25 8 PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. ESR AT + 25 °C 100 kHz (m) MAX. RIPPLE 100 kHz IRMS (A) AVAILABLE RELIABILITY LEVELS 60 25 20 18 24 2.2 2.9 3.3 3.7 2.9 A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z 56 30 25 31 2.0 2.7 2.9 2.8 A, B, S, Z A, B, S, Z A, B, S, Z A, B, S, Z 35 28 28 120 2.5 2.8 3 1.4 A, B, S, Z A, B, S, Z S, Z A, S, Z 60 100 100 2.3 1.6 1.4 A, B, S, Z A, B, S, Z A, B, S, Z 80 100 100 1.8 1.6 1.6 A, B, S, Z S, Z A, B, S, Z 100 100 1.6 1.6 A, B, S, Z A, B, S, Z Notes • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, E, H, L (3) Reliability level: A, S, Z (4) Reliability level: A, B, S, Z (5) Surge current: A, B, S (6) Reliability level: S, Z (1) Contact factory for availability Revision: 05-Dec-11 Document Number: 40092 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T97 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 150 220 F M 47 68 100 R F F 15 15 22 33 47 47 E R R F Z N 10 15 22 D R F MAX. DF AT + 25 °C 120 Hz (%) 25 VDC AT + 85 °C; 17 VDC AT + 125 °C T97F157(1)025(2)(4)(5) 38 8 T97M227(1)025(2)(3)(5) 55 8 35 VDC AT + 85 °C; 23 VDC AT + 125 °C T97R476(1)035(2)(4)(5) 17 6 T97F686(1)035(2)(3)(5) 24 6 T97F107M035(2)(3)(5) 35 8 50 VDC AT + 85 °C; 33 VDC AT + 125 °C T97E156(1)050(2)(4)(5) 8 6 T97R156(1)050(2)(4)(5) 8 6 T97R226(1)050(2)(4)(5) 11 6 T97F336(1)050(2)(3)(5) 17 6 T97Z476(1)050(2)(6)(5) 24 6 T97N476(1)050(2)(4)(5) 24 6 63 VDC AT + 85 °C; 42 VDC AT + 125 °C T97D106(1)063(2)(3)(5) 10 6 T97R156(1)063(2)(6)(5) 10 6 T97F226(1)063(2)(3)(5) 14 6 75 VDC AT + 85 °C; 50 VDC AT + 125 °C T97R106(1)075(2)(6)(5) 8 6 PART NUMBER 10 R (1) Notes • Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: C, E, H, L (3) Reliability level: A, S, Z (4) Reliability level: A, B, S, Z (5) Surge current: A, B, S (6) Reliability level: S, Z (1) Contact factory for availability MAX. DCL AT + 25 °C (μA) MAX. ESR AT + 25 °C 100 kHz (m) MAX. RIPPLE 100 kHz IRMS (A) AVAILABLE RELIABILITY LEVELS 80 100 1.8 1.6 A, B, S, Z A, S, Z 100 100 100 1.6 1.6 1.6 A, B, S, Z A, S, Z A, S, Z 300 250 220 150 240 150 0.9 1 1.1 1.3 1.1 1.4 A, B, S, Z A, B, S, Z A, B, S, Z A, S, Z S, Z A, B, S, Z 400 400 250 0.6 0.8 1.0 A, S, Z S, Z A, S, Z 500 0.7 S, Z RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating 4.0 6.3 10 16 20 25 35 50 63 75 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Capacitor Voltage Rating 4.0 6.3 10 16 20 25 35 50 63 75 Revision: 05-Dec-11 Operating Voltage 2.5 3.6 6.0 10 12 15 24 28 37.8 45 Operating Voltage 2.5 3.3 5.0 8.0 10 12 15 24 32 37 Document Number: 40092 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T97 www.vishay.com Vishay Sprague TYPICAL CURVES 1500 μF - 4 V “R” CASE SIZE ESR and Z vs. FREQUENCY 330 μF - 10 V “E” CASE SIZE ESR and Z vs. FREQUENCY 1 1 ESR Z ESR and Z (Ω) ESR and Z () ESR Z 0.1 0.01 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 0.1 0.01 100 Hz 1 kHz FREQUENCY 10 kHz 100 kHz 1000 μF - 6.3 V “R” CASE SIZE ESR and Z vs. FREQUENCY 330 μF - 6.3 V “V” CASE SIZE and Z vs. FREQUENCY 10 1 ESR Z ESR Z ESR and Z () ESR and Z () 1 MHz FREQUENCY 1 0.1 0.1 0.01 0.01 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz FREQUENCY FREQUENCY 470 μF - 4 V “V” CASE SIZE ESR and Z vs. FREQUENCY 10 ESR and Z (Ω) ESR Z 1 0.1 0.01 100 Hz 1 kHz 10 kHz 100 kHz 1 MHz FREQUENCY Revision: 05-Dec-11 Document Number: 40092 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T97 www.vishay.com Vishay Sprague POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR V 0.141 D 0.215 E 0.240 R, F, M 0.250 Z 0.265 H 0.265 N 0.280 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" FULL REEL 7" HALF REEL V 1000 500 D 400 200 E 500 250 R 300 150 125 F 250 Z 250 125 M 200 100 H 200 100 N 200 100 PRODUCT INFORMATION Conformal Coated Guide Pad Dimensions www.vishay.com/doc?40150 Packaging Dimensions Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 FAQ Frequently Asked Questions Revision: 05-Dec-11 www.vishay.com/doc?40110 Document Number: 40092 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1