TR3 www.vishay.com Vishay Sprague Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT®, Molded Case, Low ESR FEATURES • Low ESR • 100 % surge current tested (C, D, and E case Available sizes) • Molded case available in seven case codes Available • High ripple current carrying capability • Terminations: 100 % matte tin, standard tin/lead available • Compatible with “High Volume” automatic pick and place equipment • Compliant terminations • Meets IEC specification QC300801/US0001 and EIA535BAAC mechanical and performance requirements • Moisture sensitivity level 1 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 °C to + 125 °C (above 85 °C, voltage derating is required) Capacitance Range: 0.47 μF to 1000 μF Capacitance Tolerance: ± 10 %, ± 20 % Voltage Rating: 4 VDC to 63 VDC Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. APPLICATIONS • • • • • Industrial Telecom infrastructure Consumer Computer General purpose ORDERING INFORMATION TR3 TYPE D CASE CODE 107 CAPACITANCE K CAPACITANCE TOLERANCE 010 DC VOLTAGE RATING AT + 85 °C C TERMINATION AND PACKAGING 0100 ESR See Ratings and Case Codes table This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an “R” (6R3 = 6.3 V). C = Matte tin/7" (178 mm) reels D = Matte tin/13" (330 mm) reels E = Tin/lead/7" (178 mm) reels F = Tin/lead/13" (330 mm) reels Maximum 100 kHz ESR in m. See note below. Notes • We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size. Voltage substitutions will be marked with the higher voltage rating. Low ESR solid tantalum chip capacitors allow delta ESR of 1.25 times the datasheet limit after mounting. • Dry pack is available per request, contact regional marketing. Revision: 17-Jun-13 Document Number: 40080 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague DIMENSIONS in inches [millimeters] L TW W H TH (MIN.) P CASE CODE EIA SIZE L W H P TW TH (MIN.) A 3216-18 0.126 ± 0.008 [3.2 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.063 ± 0.008 [1.6 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.047 ± 0.004 [1.2 ± 0.10] 0.028 [0.70] B 3528-21 0.138 ± 0.008 [3.5 ± 0.20] 0.110 ± 0.008 [2.8 ± 0.20] 0.075 ± 0.008 [1.9 ± 0.20] 0.031 ± 0.012 [0.80 ± 0.30] 0.087 ± 0.004 [2.2 ± 0.10] 0.028 [0.70] C 6032-28 0.236 ± 0.012 [6.0 ± 0.30] 0.126 ± 0.012 [3.2 ± 0.30] 0.098 ± 0.012 [2.5 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.087 ± 0.004 [2.2 ± 0.10] 0.039 [1.0] D 7343-31 0.287 ± 0.012 [7.3 ± 0.30] 0.170 ± 0.012 [4.3 ± 0.30] 0.110 ± 0.012 [2.8 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.094 ± 0.004 [2.4 ± 0.10] 0.039 [1.0] E 7343-43 0.287 ± 0.012 [7.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.157 ± 0.012 [4.0 ± 0.30] 0.051 ± 0.012 [1.3 ± 0.30] 0.094 ± 0.004 [2.4 ± 0.10] 0.039 [1.0] V 7343-20 0.287 ± 0.012 [7.3 ± 0.30] 0.169 ± 0.012 [4.3 ± 0.30] 0.079 max. [2.0 max.] 0.051 ± 0.012 [1.3 ± 0.30] 0.094 ± 0.004 [2.4 ± 0.10] 0.039 [1.0] W 7361-38 0.287 ± 0.012 [7.3 ± 0.30] 0.236 ± 0.012 [6.0 ± 0.30] 0.138 ± 0.012 [3.5 ± 0.30] 0.047 ± 0.008 [1.2 ± 0.20] 0.122 ± 0.004 [3.1 ± 0.10] 0.069 [1.75] RATINGS AND CASE CODES μF 4V 6.3 V 10 V 16 V 20 V 25 V 35 V 0.15 50 V 63 V A 0.22 A A 0.33 A A B/C 0.47 A A/B 0.68 A A 1.0 A 1.5 2.2 A 3.3 A A/B B/C A/B B/C B/C B/C/D A A A/B B/C A/B A/B A/B B/C C/D A/B A/B A/B A/B/C B/C/D C/D/E A 4.7 A A 6.8 A A A/B A/B B/C C/D/E D/E 10 A/B A/B A/B/C B/C B/C/D C/D/E D/E E 15 A A A/B/C B/C B/C B/C/D D/E 22 A A/B/C A/B/C B/C/D B/C/D C/D/E/V D/E 33 A/B A/B B/C B/C/D C/D D/E 47 A/B A/B/C B/C/D C/D D/E D/E 68 B/C B/C/D B/C/D/E/V D D/E E/W 100 A/B/C B/C/D/V B/C/D/E/V D/E/V D/E/W W 150 B/C/D C/D/E C/D/E D/E/W W 220 B/C/D C/D/E/V D/E/V E 330 D D/E/W D/E/W 470 D/E D/E/W E/W 680 D/E E 1000 E E Revision: 17-Jun-13 D E Document Number: 40080 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague MARKING “A” CASE VOLTAGE CODE Indicates Low ESR Capacitance Code, pF V 104R Voltage Code Polarity Band (+) A Case VOLTS CODE 4.0 G 6.3 J 10 A 16 C 20 D 25 E 35 V 50 T Indicates Low ESR Voltage Capacitance μF Polarity Band (+) 22 R10 XX 2 Date Code Vishay Sprague Logo B, C, D, E, V Cases Marking Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” Case capacitors use a letter code for the voltage and EIA capacitance code. The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V. A manufacturing date code is marked on all capacitors. Call the factory for further explanation. STANDARD RATINGS CAPACITANCE (μF) CASE CODE 15 22 33 33 47 47 47 68 68 100 100 100 150 150 150 150 150 220 220 220 220 220 220 220 220 330 330 330 330 A A A B A A B B C A B C B B B C D B B B B C D D D D D D D PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C TR3A156(1)004(2)1500 0.6 TR3A226(1)004(2)1500 0.9 TR3A336(1)004(2)1500 1.3 TR3B336(1)004(2)0500 1.3 TR3A476(1)004(2)0800 1.9 TR3A476(1)004(2)0500 1.9 TR3B476(1)004(2)0500 1.9 TR3B686(1)004(2)0500 2.7 TR3C686(1)004(2)0275 2.7 TR3A107M004(2)1000 10.0 TR3B107(1)004(2)0450 4.0 TR3C107(1)004(2)0225 4.0 TR3B157(1)004(2)0900 6.0 TR3B157(1)004(2)0500 6.0 TR3B157(1)004(2)0400 6.0 TR3C157(1)004(2)0250 6.0 TR3D157(1)004(2)0150 6.0 TR3B227M004(2)1100 8.8 TR3B227M004(2)0700 8.8 TR3B227M004(2)0500 8.8 TR3B227M004(2)0450 8.8 TR3C227(1)004(2)0200 8.8 TR3D227(1)004(3)0050 8.8 TR3D227(1)004(2)0150 8.8 TR3D227(1)004(2)0100 8.8 TR3D337(1)004(2)0100 13.2 TR3D337(1)004(3)0045 13.2 TR3D337(1)004(3)0035 13.2 TR3D337(1)004(2)0150 13.2 6 6 6 6 14 14 6 6 6 30 8 6 14 14 14 12 8 18 18 18 18 8 8 8 8 8 8 8 8 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 1.500 1.500 1.500 0.500 0.800 0.500 0.500 0.500 0.275 1.000 0.450 0.225 0.900 0.500 0.400 0.250 0.150 1.100 0.700 0.500 0.450 0.200 0.050 0.150 0.100 0.100 0.045 0.035 0.150 0.22 0.22 0.22 0.41 0.31 0.39 0.41 0.41 0.63 0.27 0.43 0.70 0.31 0.41 0.46 0.66 1.00 0.28 0.35 0.41 0.43 0.74 1.73 1.00 1.22 1.22 1.83 2.07 1.00 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 470 470 470 470 470 470 470 470 680 680 680 680 1000 D D D D D E E E D D E E E 3.3 6.8 10 10 10 15 15 22 22 22 22 22 22 33 33 33 33 33 33 33 47 47 47 47 47 47 47 68 68 68 68 68 68 68 68 68 68 100 100 100 100 A A A A B A A A A A A B C A A A B B B B A B B B B C C B B B B B C C C D D B B B B PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C TR3D477(1)004(2)0125 18.8 TR3D477(1)004(2)0100 18.8 TR3D477(1)004(2)0060 18.8 TR3D477(1)004(3)0045 18.8 TR3D477(1)004(3)0035 18.8 TR3E477(1)004(2)0100 18.8 TR3E477(1)004(3)0045 18.8 TR3E477(1)004(3)0035 18.8 TR3D687M004(2)0100 27.2 TR3D687M004(3)0060 27.2 TR3E687(1)004(2)0100 27.2 TR3E687(1)004(3)0040 27.2 TR3E108M004(2)0100 40.0 6.3 VDC AT + 85 °C; 4 VDC AT 125 °C TR3A335(1)6R3(2)2100 0.5 TR3A685(1)6R3(2)1800 0.5 TR3A106(1)6R3(2)2000 0.6 TR3A106(1)6R3(2)1500 0.6 TR3B106(1)6R3(2)1500 0.6 TR3A156(1)6R3(2)2000 0.9 TR3A156(1)6R3(2)1000 0.9 TR3A226(1)6R3(2)3000 1.4 TR3A226(1)6R3(2)2000 1.4 TR3A226(1)6R3(2)1000 1.4 TR3A226(1)6R3(2)0900 1.4 TR3B226(1)6R3(2)0600 1.4 TR3C226(1)6R3(2)0500 1.3 TR3A336(1)6R3(2)2000 2.0 TR3A336(1)6R3(2)0800 2.0 TR3A336(1)6R3(2)0600 2.0 TR3B336(1)6R3(2)0450 2.0 TR3B336(1)6R3(2)0350 2.0 TR3B336(1)6R3(2)0600 2.0 TR3B336(1)6R3(2)0500 2.0 TR3A476(1)6R3(2)0800 3.0 TR3B476(1)6R3(2)0550 3.0 TR3B476(1)6R3(2)0500 3.0 TR3B476(1)6R3(2)0350 3.0 TR3B476(1)6R3(2)0250 3.0 TR3C476(1)6R3(2)0300 3.0 TR3C476(1)6R3(2)0250 3.0 TR3B686(1)6R3(2)0650 4.3 TR3B686(1)6R3(2)0550 4.3 TR3B686(1)6R3(2)0500 4.3 TR3B686(1)6R3(2)0350 4.3 TR3B686(1)6R3(2)0250 4.3 TR3C686(1)6R3(2)0275 4.3 TR3C686(1)6R3(2)0250 4.3 TR3C686(1)6R3(2)0200 4.3 TR3D686(1)6R3(2)0200 4.3 TR3D686(1)6R3(2)0175 4.3 TR3B107(1)6R3(2)1500 6.3 TR3B107(1)6R3(2)0500 6.3 TR3B107(1)6R3(2)0400 6.3 TR3B107(1)6R3(2)0250 6.3 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 10 10 10 10 10 10 10 10 25 25 12 12 20 0.125 0.100 0.060 0.045 0.035 0.100 0.045 0.035 0.100 0.060 0.100 0.040 0.100 1.10 1.22 1.58 1.83 2.07 1.28 1.91 2.17 1.22 1.58 1.28 1.37 1.28 6 6 6 6 6 6 6 6 6 6 6 6 6 14 14 14 6 6 6 6 12 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 15 15 15 15 2.100 1.800 2.000 1.500 1.500 2.000 1.000 3.000 2.000 1.000 0.900 0.600 0.500 2.000 0.800 0.600 0.450 0.350 0.600 0.500 0.800 0.550 0.500 0.350 0.250 0.300 0.250 0.650 0.550 0.500 0.350 0.250 0.275 0.250 0.200 0.200 0.175 1.500 0.500 0.400 0.250 0.19 0.20 0.19 0.22 0.24 0.19 0.27 0.16 0.19 0.27 0.29 0.38 0.47 0.19 0.31 0.35 0.43 0.49 0.38 0.41 0.31 0.39 0.41 0.49 0.58 0.61 0.66 0.36 0.39 0.41 0.49 0.58 0.63 0.66 0.74 0.87 0.93 0.24 0.41 0.46 0.58 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 470 470 470 470 680 1000 1000 1000 C C C C C D D V V C C D D D D D E C C C D D D E E V V D D D D D D D E E E W W W D D D D E E E E W W W E E E E PART NUMBER MAX. DCL AT + 25 °C (μA) 6.3 VDC AT + 85 °C; 4 VDC AT 125 °C TR3C107(1)6R3(2)0300 6.3 TR3C107(1)6R3(2)0250 6.3 TR3C107(1)6R3(2)0150 6.3 TR3C107(1)6R3(2)0125 6.3 TR3C107(1)6R3(2)0100 6.3 TR3D107(1)6R3(2)0150 6.3 TR3D107(1)6R3(2)0140 6.3 TR3V107(1)6R3(3)0200 6.3 TR3V107(1)6R3(3)0150 6.3 TR3C157(1)6R3(2)0300 9.4 TR3C157(1)6R3(2)0200 9.4 TR3D157(1)6R3(2)0150 9.4 TR3D157(1)6R3(2)0125 9.4 TR3D157(1)6R3(2)0075 9.4 TR3D157(1)6R3(2)0070 9.4 TR3D157(1)6R3(3)0050 9.4 TR3E157(1)6R3(2)0100 9.4 TR3C227(1)6R3(2)0300 13.9 TR3C227(1)6R3(2)0250 13.9 TR3C227(1)6R3(2)0225 13.9 TR3D227(1)6R3(2)0150 13.9 TR3D227(1)6R3(2)0100 13.9 TR3D227(1)6R3(3)0050 13.9 TR3E227(1)6R3(2)0150 13.9 TR3E227(1)6R3(2)0100 13.9 TR3V227(1)6R3(3)0100 13.9 TR3V227(1)6R3(3)0150 13.9 TR3D337(1)6R3(2)0150 20.8 TR3D337(1)6R3(2)0125 20.8 TR3D337(1)6R3(2)0100 20.8 TR3D337(1)6R3(2)0060 20.8 TR3D337(1)6R3(3)0050 20.8 TR3D337(1)6R3(3)0045 20.8 TR3D337(1)6R3(3)0035 20.8 TR3E337(1)6R3(2)0150 20.8 TR3E337(1)6R3(2)0100 20.8 TR3E337(1)6R3(2)0050 20.8 TR3W337(1)6R3(3)0100 20.8 TR3W337(1)6R3(3)0060 20.8 TR3W337(1)6R3(3)0040 20.8 TR3D477(1)6R3(2)0200 29.6 TR3D477(1)6R3(2)0150 29.6 TR3D477(1)6R3(2)0125 29.6 TR3D477(1)6R3(3)0100 29.6 TR3E477(1)6R3(2)0100 29.6 TR3E477(1)6R3(3)0065 29.6 TR3E477(1)6R3(3)0060 29.6 TR3E477(1)6R3(3)0050 29.6 TR3W477(1)6R3(3)0100 29.6 TR3W477(1)6R3(3)0060 29.6 TR3W477(1)6R3(3)0050 29.6 TR3E687(1)6R3(2)0100 42.8 TR3E108M6R3(2)0200 63.0 TR3E108M6R3(2)0150 63.0 TR3E108M6R3(3)0100 63.0 MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 14 14 14 8 8 8 8 8 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 14 14 14 14 10 10 10 10 20 20 20 20 30 30 30 0.300 0.250 0.150 0.125 0.100 0.150 0.140 0.200 0.150 0.300 0.200 0.150 0.125 0.075 0.070 0.050 0.100 0.300 0.250 0.225 0.150 0.100 0.050 0.150 0.100 0.100 0.150 0.150 0.125 0.100 0.060 0.050 0.045 0.035 0.150 0.100 0.050 0.100 0.060 0.040 0.200 0.150 0.125 0.100 0.100 0.065 0.060 0.050 0.100 0.060 0.050 0.100 0.200 0.150 0.100 0.61 0.66 0.86 0.94 1.05 1.00 1.04 0.79 0.91 0.61 0.74 1.00 1.10 1.41 1.46 1.73 1.28 0.61 0.66 0.70 1.00 1.22 1.73 1.05 1.28 1.12 0.91 1.00 1.10 1.22 1.58 1.73 1.83 2.07 1.05 1.28 1.82 1.58 2.04 2.50 0.87 1.00 1.10 1.22 1.28 1.59 1.66 1.82 1.58 2.04 2.24 1.28 0.91 1.05 1.28 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 2.2 2.2 2.2 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 10 10 10 10 10 10 10 15 15 15 15 15 15 22 22 22 22 22 22 22 22 22 22 22 33 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 A A A A A A A B A A B A A A A B B B A A B B B C A A A A B B B B C C C B B B B B B C C B B B B C C C D D D PART NUMBER MAX. DCL AT + 25 °C (μA) 10 VDC AT + 85 °C; 7 VDC AT 125 °C TR3A225(1)010(2)6800 0.5 TR3A225(1)010(2)6000 0.5 TR3A225(1)010(2)1800 0.5 TR3A475(1)010(2)3000 0.5 TR3A475(1)010(2)1500 0.5 TR3A475(1)010(2)1400 0.5 TR3A475(1)010(2)1000 0.5 TR3B475(1)010(2)1400 0.5 TR3A685(1)010(2)1800 0.7 TR3A685(1)010(2)3000 0.7 TR3B685(1)010(2)1300 0.7 TR3A106(1)010(2)2000 1.0 TR3A106(1)010(2)1800 1.0 TR3A106(1)010(2)1000 1.0 TR3A106(1)010(2)0900 1.0 TR3B106(1)010(2)1000 1.0 TR3B106(1)010(2)0800 1.0 TR3B106(1)010(2)0750 1.0 TR3A156(1)010(2)2000 1.5 TR3A156(1)010(2)1000 1.5 TR3B156(1)010(2)0600 1.5 TR3B156(1)010(2)0450 1.5 TR3B156(1)010(2)0700 1.5 TR3C156(1)010(2)0700 1.5 TR3A226(1)010(2)1500 2.2 TR3A226(1)010(2)1000 2.2 TR3A226(1)010(2)0900 2.2 TR3A226(1)010(2)0800 2.2 TR3B226(1)010(2)1000 2.2 TR3B226(1)010(2)0700 2.2 TR3B226(1)010(2)0500 2.2 TR3B226(1)010(2)0400 2.2 TR3C226(1)010(2)0400 2.2 TR3C226(1)010(2)0345 2.2 TR3C226(1)010(2)0300 2.2 TR3B336(1)010(2)0425 3.3 TR3B336(1)010(2)1400 3.3 TR3B336(1)010(2)0650 3.3 TR3B336(1)010(2)0600 3.3 TR3B336(1)010(2)0500 3.3 TR3B336(1)010(2)0300 3.3 TR3C336(1)010(2)0375 3.3 TR3C336(1)010(2)0300 3.3 TR3B476(1)010(2)0600 4.7 TR3B476(1)010(2)0500 4.7 TR3B476(1)010(2)0350 4.7 TR3B476(1)010(2)0650 4.7 TR3C476(1)010(2)0200 4.7 TR3C476(1)010(2)0350 4.7 TR3C476(1)010(2)0300 4.7 TR3D476(1)010(2)0220 4.7 TR3D476(1)010(2)0200 4.7 TR3D476(1)010(2)0140 4.7 MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6.800 6.000 1.800 3.000 1.500 1.400 1.000 1.400 1.800 3.000 1.300 2.000 1.800 1.000 0.900 1.000 0.800 0.750 2.000 1.000 0.600 0.450 0.700 0.700 1.500 1.000 0.900 0.800 1.000 0.700 0.500 0.400 0.400 0.345 0.300 0.425 1.400 0.650 0.600 0.500 0.300 0.375 0.300 0.600 0.500 0.350 0.650 0.200 0.350 0.300 0.220 0.200 0.140 0.11 0.11 0.20 0.16 0.22 0.23 0.27 0.25 0.20 0.16 0.26 0.19 0.20 0.27 0.29 0.29 0.33 0.34 0.19 0.27 0.38 0.43 0.35 0.40 0.22 0.27 0.29 0.31 0.29 0.35 0.41 0.46 0.52 0.56 0.61 0.45 0.25 0.36 0.38 0.41 0.53 0.54 0.61 0.38 0.41 0.49 0.36 0.74 0.56 0.61 0.83 0.87 1.04 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 47 47 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 220 220 220 220 220 220 D D B B B B C C C C D D D D E V V V V V B C C C D D D D D D E E E V V V C D D D D D E E D D D D E E PART NUMBER MAX. DCL AT + 25 °C (μA) 10 VDC AT + 85 °C; 7 VDC AT 125 °C TR3D476(1)010(2)0135 4.7 TR3D476(1)010(2)0100 4.7 TR3B686(1)010(2)1500 6.8 TR3B686(1)010(2)0900 6.8 TR3B686(1)010(2)0750 6.8 TR3B686(1)010(2)0600 6.8 TR3C686(1)010(2)0200 6.8 TR3C686(1)010(2)0300 6.8 TR3C686(1)010(2)0275 6.8 TR3C686(1)010(2)0225 6.8 TR3D686(1)010(2)0200 6.8 TR3D686(1)010(2)0150 6.8 TR3D686(1)010(2)0100 6.8 TR3D686(1)010(3)0070 6.8 TR3E686(1)010(2)0150 6.8 TR3V686(1)010(3)0700 6.8 TR3V686(1)010(3)0300 6.8 TR3V686(1)010(3)0200 6.8 TR3V686(1)010(3)0140 6.8 TR3V686(1)010(3)0100 6.8 TR3B107M010(2)1400 10.0 TR3C107(1)010(2)0200 10.0 TR3C107(1)010(2)0150 10.0 TR3C107(1)010(2)0100 10.0 TR3D107(1)010(2)0150 10.0 TR3D107(1)010(2)0100 10.0 TR3D107(1)010(2)0080 10.0 TR3D107(1)010(3)0070 10.0 TR3D107(1)010(3)0065 10.0 TR3D107(1)010(3)0050 10.0 TR3E107(1)010(2)0125 10.0 TR3E107(1)010(2)0150 10.0 TR3E107(1)010(2)0100 10.0 TR3V107(1)010(3)0400 10.0 TR3V107(1)010(3)0200 10.0 TR3V107(1)010(3)0150 10.0 TR3C157M010(2)0500 15.0 TR3D157(1)010(2)0150 15.0 TR3D157(1)010(2)0100 15.0 TR3D157(1)010(2)0075 15.0 TR3D157(1)010(3)0070 15.0 TR3D157(1)010(3)0050 15.0 TR3E157(1)010(2)0100 15.0 TR3E157(1)010(2)0080 15.0 TR3D227(1)010(2)0150 22.0 TR3D227(1)010(2)0125 22.0 TR3D227(1)010(2)0100 22.0 TR3D227(1)010(3)0050 22.0 TR3E227(1)010(2)0150 22.0 TR3E227(1)010(2)0100 22.0 MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 14 14 14 14 6 6 6 6 6 6 6 6 4 6 6 6 6 6 25 8 8 8 6 6 6 6 6 6 6 6 6 8 8 8 20 8 8 8 8 8 8 8 8 8 8 8 8 8 0.135 0.100 1.500 0.900 0.750 0.600 0.200 0.300 0.275 0.225 0.200 0.150 0.100 0.070 0.150 0.700 0.300 0.200 0.140 0.100 1.400 0.200 0.150 0.100 0.150 0.100 0.080 0.070 0.065 0.050 0.125 0.150 0.100 0.400 0.200 0.150 0.500 0.150 0.100 0.075 0.070 0.050 0.100 0.080 0.150 0.125 0.100 0.050 0.150 0.100 1.05 1.22 0.24 0.31 0.34 0.38 0.74 0.61 0.63 0.70 0.87 1.00 1.22 1.46 1.05 0.42 0.65 0.79 0.94 1.12 0.25 0.74 0.86 1.05 1.00 1.22 1.37 1.52 1.46 1.73 1.15 1.05 1.28 0.56 0.79 0.91 0.47 1.00 1.22 1.41 1.46 1.73 1.28 1.44 1.00 1.10 1.22 1.73 1.05 1.28 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 220 220 220 220 220 330 330 330 330 330 330 330 330 470 470 470 470 470 470 470 E E E V V D D D E E W W W E E E E W W W 1.0 2.2 2.2 2.2 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10 10 10 10 10 10 15 15 15 22 22 22 22 22 22 22 33 A A A A A A B A A A A B B A A B B A B B C C C B B C B B B B C C D B PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 10 VDC AT + 85 °C; 7 VDC AT 125 °C TR3E227(1)010(3)0070 22.0 TR3E227(1)010(3)0060 22.0 TR3E227(1)010(3)0050 22.0 TR3V227(1)010(3)0200 30.0 TR3V227(1)010(3)0150 30.0 TR3D337(1)010(2)0150 33.0 TR3D337(1)010(2)0125 33.0 TR3D337(1)010(2)0100 33.0 TR3E337(1)010(2)0100 33.0 TR3E337(1)010(3)0060 33.0 TR3W337(1)010(3)0100 33.0 TR3W337(1)010(3)0060 33.0 TR3W337(1)010(3)0040 33.0 TR3E477(1)010(2)0200 47.0 TR3E477(1)010(2)0150 47.0 TR3E477(1)010(2)0100 47.0 TR3E477(1)010(3)0075 47.0 TR3W477(1)010(3)0100 47.0 TR3W477(1)010(3)0060 47.0 TR3W477(1)010(3)0050 47.0 16 VDC AT + 85 °C; 10 VDC AT + 125 °C TR3A105(1)016(2)6200 0.5 TR3A225(1)016(2)4000 0.5 TR3A225(1)016(2)3500 0.5 TR3A225(1)016(2)1800 0.5 TR3A335(1)016(2)4000 0.5 TR3A335(1)016(2)3500 0.5 TR3B335(1)016(2)2500 0.5 TR3A475(1)016(2)3000 0.8 TR3A475(1)016(2)2500 0.8 TR3A475(1)016(2)2000 0.8 TR3A475(1)016(2)1500 0.8 TR3B475(1)016(2)1500 0.8 TR3B475(1)016(2)0800 0.8 TR3A685(1)016(2)3000 1.1 TR3A685(1)016(2)1500 1.1 TR3B685(1)016(2)1200 1.1 TR3B685(1)016(2)0600 1.1 TR3A106(1)016(2)1700 1.6 TR3B106(1)016(2)0800 1.6 TR3B106(1)016(2)0500 1.6 TR3C106(1)016(2)0600 1.6 TR3C106(1)016(2)0500 1.6 TR3C106(1)016(2)0450 1.6 TR3B156(1)016(2)0800 2.4 TR3B156(1)016(2)0500 2.4 TR3C156(1)016(2)0400 2.4 TR3B226(1)016(2)1000 3.5 TR3B226(1)016(2)0700 3.5 TR3B226(1)016(2)0600 3.5 TR3B226(1)016(2)0400 3.5 TR3C226(1)016(2)0375 3.5 TR3C226(1)016(2)0350 3.5 TR3D226(1)016(2)0250 3.5 TR3B336(1)016(2)0700 5.3 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 8 8 8 12 12 15 15 15 10 10 10 10 10 15 15 15 15 20 20 20 0.070 0.060 0.050 0.200 0.150 0.150 0.125 0.100 0.100 0.060 0.100 0.060 0.040 0.200 0.150 0.100 0.075 0.100 0.060 0.050 1.54 1.66 1.82 0.79 0.91 1.00 1.10 1.22 1.28 1.66 1.58 2.04 2.50 0.91 1.05 1.28 1.48 1.58 2.04 2.24 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6.200 4.000 3.500 1.800 4.000 3.500 2.500 3.000 2.500 2.000 1.500 1.500 0.800 3.000 1.500 1.200 0.600 1.700 0.800 0.500 0.600 0.500 0.450 0.800 0.500 0.400 1.000 0.700 0.600 0.400 0.375 0.350 0.250 0.700 0.11 0.14 0.15 0.20 0.14 0.15 0.18 0.16 0.17 0.19 0.22 0.24 0.33 0.16 0.22 0.27 0.38 0.21 0.33 0.41 0.43 0.47 0.49 0.33 0.41 0.52 0.29 0.35 0.38 0.46 0.54 0.56 0.77 0.35 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 68 68 68 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 B B C C D D D C C C D D D D D D D D D D D D E E E V V D D D D D D D E E E E E W E E E 1.0 1.0 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 A A A A A A B A A B B PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 16 VDC AT + 85 °C; 10 VDC AT + 125 °C TR3B336(1)016(2)0500 5.3 TR3B336(1)016(2)0350 5.3 TR3C336(1)016(2)0300 5.3 TR3C336(1)016(2)0225 5.3 TR3D336(1)016(2)0250 5.3 TR3D336(1)016(2)0225 5.3 TR3D336(1)016(2)0150 5.3 TR3C476(1)016(2)0500 7.5 TR3C476(1)016(2)0350 7.5 TR3C476(1)016(2)0300 7.5 TR3D476(1)016(2)0200 7.5 TR3D476(1)016(2)0150 7.5 TR3D476(1)016(2)0100 7.5 TR3D476(1)016(2)0080 7.5 TR3D476(1)016(2)0070 7.5 TR3D686(1)016(2)0150 10.9 TR3D686(1)016(2)0100 10.9 TR3D686(1)016(3)0070 10.9 TR3D107(1)016(2)0150 16.0 TR3D107(1)016(2)0125 16.0 TR3D107(1)016(2)0100 16.0 TR3D107(1)016(3)0075 16.0 TR3E107(1)016(2)0150 16.0 TR3E107(1)016(2)0125 16.0 TR3E107(1)016(2)0100 16.0 TR3V107(1)016(3)0150 16.0 TR3V107(1)016(3)0100 16.0 TR3D157(1)016(2)0400 24.0 TR3D157(1)016(2)0150 24.0 TR3D157(1)016(2)0125 24.0 TR3D157(1)016(2)0100 24.0 TR3D157(1)016(2)0085 24.0 TR3D157(1)016(3)0075 24.0 TR3D157(1)016(3)0060 24.0 TR3E157(1)016(2)0400 24.0 TR3E157(1)016(2)0150 24.0 TR3E157(1)016(2)0100 24.0 TR3E157(1)016(2)0075 24.0 TR3E157(1)016(2)0060 24.0 TR3W157(1)016(2)0075 24.0 TR3E227(1)016(2)0150 35.2 TR3E227(1)016(2)0125 35.2 TR3E227(1)016(2)0100 35.2 20 VDC AT + 85 °C; 13 VDC AT + 125 °C TR3A105(1)020(2)5500 0.5 TR3A105(1)020(2)3000 0.5 TR3A155(1)020(2)3000 0.5 TR3A225(1)020(2)4000 0.5 TR3A225(1)020(2)3000 0.5 TR3A335(1)020(2)4000 0.7 TR3B335(1)020(2)1300 0.7 TR3A475(1)020(2)3500 0.9 TR3A475(1)020(2)1800 0.9 TR3B475(1)020(2)1000 0.9 TR3B475(1)020(2)0750 0.9 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 10 10 8 8 8 8 8 8 8 8 8 8 8 8 10 14 14 14 0.500 0.350 0.300 0.225 0.250 0.225 0.150 0.500 0.350 0.300 0.200 0.150 0.100 0.080 0.070 0.150 0.100 0.070 0.150 0.125 0.100 0.075 0.150 0.125 0.100 0.150 0.100 0.400 0.150 0.125 0.100 0.085 0.075 0.060 0.400 0.150 0.100 0.075 0.060 0.075 0.150 0.125 0.100 0.41 0.49 0.61 0.70 0.77 0.82 1.00 0.47 0.56 0.61 0.87 1.00 1.22 1.37 1.46 1.00 1.22 1.46 1.00 1.10 1.22 1.41 1.05 1.15 1.28 0.91 1.12 0.61 1.00 1.10 1.22 1.33 1.41 1.58 0.64 1.05 1.28 1.48 1.66 1.83 1.05 1.15 1.28 4 4 6 6 6 6 6 6 6 6 6 5.500 3.000 3.000 4.000 3.000 4.000 1.300 3.500 1.800 1.000 0.750 0.12 0.16 0.16 0.14 0.16 0.14 0.26 0.15 0.20 0.29 0.34 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 9 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 15 15 15 22 22 22 22 22 22 22 22 33 33 33 33 33 33 47 47 47 47 47 47 68 68 68 68 68 68 68 68 100 100 100 100 100 100 100 100 100 100 100 100 A A A B B B B C C C C C B B C B B B C C D D D C C C D D D D D D D E E D D D D E E E E D D D D D E E E W W W W PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 20 VDC AT + 85 °C; 13 VDC AT + 125 °C TR3A685(1)020(2)3200 1.4 TR3A685(1)020(2)3000 1.4 TR3A685(1)020(2)2600 1.4 TR3B685(1)020(2)1000 1.4 TR3B685(1)020(2)0600 1.4 TR3B106(1)020(2)1000 2.0 TR3B106(1)020(2)0500 2.0 TR3C106(1)020(2)0700 2.0 TR3C106(1)020(2)0500 2.0 TR3C106(1)020(2)0475 2.0 TR3C106(1)020(2)0450 2.0 TR3C106(1)020(2)0400 2.0 TR3B156(1)020(2)1000 3.0 TR3B156(1)020(2)0500 3.0 TR3C156(1)020(2)0400 3.0 TR3B226(1)020(2)0800 4.4 TR3B226(1)020(2)0600 4.4 TR3B226(1)020(2)0400 4.4 TR3C226(1)020(2)0400 4.4 TR3C226(1)020(2)0375 4.4 TR3D226(1)020(2)0300 4.4 TR3D226(1)020(2)0225 3.5 TR3D226(1)020(2)0200 4.4 TR3C336(1)020(2)0350 6.6 TR3C336(1)020(2)0300 6.6 TR3C336(1)020(2)0200 6.6 TR3C336(1)020(2)0400 6.6 TR3D336(1)020(2)0250 6.6 TR3D336(1)020(2)0200 6.6 TR3D476(1)020(2)0200 9.4 TR3D476(1)020(2)0175 9.4 TR3D476(1)020(2)0150 9.4 TR3D476(1)020(3)0100 9.4 TR3E476(1)020(2)0150 9.4 TR3E476(1)020(3)0125 9.4 TR3D686(1)020(2)0200 13.6 TR3D686(1)020(2)0175 13.6 TR3D686(1)020(2)0150 13.6 TR3D686(1)020(2)0115 13.6 TR3E686(1)020(2)0200 13.6 TR3E686(1)020(2)0150 13.6 TR3E686(1)020(2)0125 13.6 TR3E686(1)020(2)0120 13.6 TR3D107(1)020(2)0200 20.0 TR3D107(1)020(2)0150 20.0 TR3D107(1)020(2)0100 20.0 TR3D107(1)020(3)0085 20.0 TR3D107(1)020(3)0080 20.0 TR3E107(1)020(2)0200 20.0 TR3E107(1)020(2)0150 20.0 TR3E107(1)020(2)0100 20.0 TR3W107(1)020(3)0200 20.0 TR3W107(1)020(3)0100 20.0 TR3W107(1)020(3)0080 20.0 TR3W107(1)020(3)0060 20.0 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 8 8 8 8 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 3.200 3.000 2.600 1.000 0.600 1.000 0.500 0.700 0.500 0.475 0.450 0.400 1.000 0.500 0.400 0.800 0.600 0.400 0.400 0.375 0.300 0.225 0.200 0.350 0.300 0.200 0.400 0.250 0.200 0.200 0.175 0.150 0.100 0.150 0.125 0.200 0.175 0.150 0.115 0.200 0.150 0.125 0.120 0.200 0.150 0.100 0.085 0.080 0.200 0.150 0.100 0.200 0.100 0.080 0.060 0.15 0.16 0.17 0.29 0.38 0.29 0.41 0.40 0.47 0.48 0.49 0.52 0.29 0.41 0.52 0.33 0.38 0.46 0.52 0.54 0.71 0.82 0.87 0.56 0.61 0.74 0.61 0.77 0.87 0.87 0.93 1.00 1.22 1.05 1.15 0.87 0.93 1.00 1.14 0.91 1.05 1.15 1.17 0.87 1.00 1.22 1.33 1.37 0.91 1.05 1.28 1.12 1.58 1.77 2.04 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 10 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 150 150 150 150 W W W W 0.47 0.68 1.0 1.5 1.5 1.5 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 A A A A A B A B B B B A A B B B A A B B B B C C B B B B B B C C B B B B C C C C D D B B B C C D D D PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 20 VDC AT + 85 °C; 13 VDC AT + 125 °C TR3W157(1)020(3)0200 30.0 TR3W157(1)020(3)0150 30.0 TR3W157(1)020(3)0100 30.0 TR3W157(1)020(3)0080 30.0 25 VDC AT + 85 °C; 17 VDC AT + 125 °C TR3A474(1)025(2)7000 0.5 TR3A684(1)025(2)6000 0.5 TR3A105(1)025(2)4000 0.5 TR3A155(1)025(2)4000 0.5 TR3A155(1)025(2)3000 0.5 TR3B155(1)025(2)1800 0.5 TR3A225(1)025(2)4000 0.6 TR3B225(1)025(2)1700 0.6 TR3B225(1)025(2)1500 0.6 TR3B225(1)025(2)1200 0.6 TR3B225(1)025(2)0900 0.6 TR3A335(1)025(2)3500 0.8 TR3A335(1)025(2)3000 0.8 TR3B335(1)025(2)2000 0.8 TR3B335(1)025(2)1500 0.8 TR3B335(1)025(2)0750 0.8 TR3A475(1)025(2)3500 1.2 TR3A475(1)025(2)3000 1.2 TR3B475(1)025(2)1500 1.2 TR3B475(1)025(2)1000 1.2 TR3B475(1)025(2)0900 1.2 TR3B475(1)025(2)0700 1.2 TR3C475(1)025(2)0600 1.2 TR3C475(1)025(2)0525 1.2 TR3B685(1)025(2)2000 1.7 TR3B685(1)025(2)1500 1.7 TR3B685(1)025(2)1200 1.7 TR3B685(1)025(2)0700 1.7 TR3B685(1)025(3)0500 1.7 TR3B685(1)025(3)0400 1.7 TR3C685(1)025(2)0600 1.7 TR3C685(1)025(2)0500 1.7 TR3B106(1)025(2)1300 2.5 TR3B106(1)025(2)1100 2.5 TR3B106(1)025(2)0900 2.5 TR3B106(1)025(2)0450 2.5 TR3C106(1)025(2)0600 2.5 TR3C106(1)025(2)0500 2.5 TR3C106(1)025(2)0450 2.5 TR3C106(1)025(2)0300 2.5 TR3D106(1)025(2)0400 2.5 TR3D106(1)025(2)0300 2.5 TR3B156(1)025(2)1000 3.8 TR3B156(1)025(2)0800 3.8 TR3B156(1)025(2)0600 3.8 TR3C156(1)025(2)0900 3.8 TR3C156(1)025(2)0425 3.8 TR3D156(1)025(2)0350 3.8 TR3D156(1)025(2)0275 3.8 TR3D156(1)025(2)0250 3.8 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 10 10 10 10 0.200 0.150 0.100 0.080 1.12 1.29 1.58 1.77 4 4 4 6 6 6 6 8 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 7.000 6.000 4.000 4.000 3.000 1.800 4.000 1.700 1.500 1.200 0.900 3.500 3.000 2.000 1.500 0.750 3.500 3.000 1.500 1.000 9.000 0.700 0.600 0.525 2.000 1.500 1.200 0.700 0.500 0.400 0.600 0.500 1.300 1.100 0.900 0.450 0.600 0.500 0.450 0.300 0.400 0.300 1.000 0.800 0.600 0.900 0.425 0.350 0.275 0.250 0.10 0.11 0.14 0.14 0.16 0.22 0.14 0.22 0.24 0.27 0.31 0.15 0.16 0.21 0.24 0.34 0.15 0.16 0.24 0.29 0.10 0.35 0.43 0.46 0.21 0.24 0.27 0.35 0.41 0.46 0.43 0.47 0.26 0.28 0.31 0.43 0.43 0.47 0.49 0.61 0.61 0.71 0.29 0.33 0.38 0.35 0.51 0.65 0.74 0.77 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 11 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 15 22 22 22 22 22 22 22 22 22 22 22 22 22 22 33 33 33 33 33 33 33 47 47 47 47 47 47 47 47 47 47 47 68 68 68 68 68 100 100 100 D C C C C C C C D D E E V V V D D D D E E E D D D D D D E E E E E E E W W W W W W 0.22 0.33 0.47 0.47 0.68 0.68 1.0 1.0 1.0 1.0 1.5 1.5 1.5 A A A B A A A A A B B B C PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 25 VDC AT + 85 °C; 17 VDC AT + 125 °C TR3D156(1)025(2)0200 3.8 TR3C226(1)025(2)1000 5.5 TR3C226(1)025(2)0900 5.5 TR3C226(1)025(2)0400 5.5 TR3C226(1)025(2)0425 5.5 TR3C226(1)025(2)0300 5.5 TR3C226(1)025(2)0275 5.5 TR3C226(1)025(2)0250 5.5 TR3D226(1)025(2)0300 5.5 TR3D226(1)025(2)0200 5.5 TR3E226(1)025(2)0300 5.5 TR3E226(1)025(2)0200 5.5 TR3V226(1)025(3)0500 5.5 TR3V226(1)025(3)0400 5.5 TR3V226(1)025(3)0250 5.5 TR3D336(1)025(2)0400 8.3 TR3D336(1)025(2)0300 8.3 TR3D336(1)025(2)0225 8.3 TR3D336(1)025(2)0200 8.3 TR3E336(1)025(2)0300 8.3 TR3E336(1)025(2)0200 8.3 TR3E336(1)025(2)0175 6.6 TR3D476(1)025(2)0350 11.8 TR3D476(1)025(2)0250 11.8 TR3D476(1)025(2)0200 11.8 TR3D476(1)025(2)0150 11.8 TR3D476(1)025(3)0125 11.8 TR3D476(1)025(3)0100 11.8 TR3E476(1)025(2)0300 11.8 TR3E476(1)025(2)0200 11.8 TR3E476(1)025(2)0150 11.8 TR3E476(1)025(3)0125 11.8 TR3E476(1)025(3)0100 11.8 TR3E686(1)025(2)0250 17.0 TR3E686(1)025(3)0125 17.0 TR3W686(1)025(3)0200 17.0 TR3W686(1)025(3)0150 17.0 TR3W686(1)025(3)0095 17.0 TR3W107(1)025(3)0200 25.0 TR3W107(1)025(3)0150 25.0 TR3W107(1)025(3)0100 25.0 35 VDC AT + 85 °C; 23 VDC AT + 125 °C TR3A224(1)035(2)6000 0.5 TR3A334(1)035(2)6000 0.5 TR3A474(1)035(2)4000 0.5 TR3B474(1)035(2)4000 0.5 TR3A684(1)035(2)6000 0.5 TR3A684(1)035(2)4000 0.5 TR3A105(1)035(2)6000 0.5 TR3A105(1)035(2)4000 0.5 TR3A105(1)035(2)3000 0.5 TR3B105(1)035(2)2000 0.5 TR3B155(1)035(2)3000 0.5 TR3B155(1)035(2)2000 0.5 TR3C155(1)035(2)2500 0.5 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 8 8 8 8 8 8 6 6 8 8 8 8 8 6 6 6 15 15 15 0.200 1.000 0.900 0.400 0.425 0.300 0.275 0.250 0.300 0.200 0.300 0.200 0.500 0.400 0.250 0.400 0.300 0.225 0.200 0.300 0.200 0.175 0.350 0.250 0.200 0.150 0.125 0.100 0.300 0.200 0.150 0.125 0.100 0.250 0.125 0.200 0.150 0.095 0.200 0.150 0.100 0.87 0.33 0.35 0.52 0.51 0.61 0.63 0.66 0.71 0.87 0.74 0.91 0.50 0.56 0.71 0.61 0.71 0.82 0.87 0.74 0.91 0.97 0.65 0.77 0.87 1.00 1.10 1.22 0.74 0.91 1.05 1.15 1.28 0.81 1.15 1.12 1.29 1.62 1.12 1.29 1.58 4 4 4 6 4 4 4 4 4 4 6 6 6 6.000 6.000 4.000 4.000 6.000 4.000 6.000 4.000 3.000 2.000 3.000 2.000 2.500 0.11 0.11 0.14 0.15 0.11 0.14 0.11 0.14 0.16 0.21 0.17 0.21 0.21 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 12 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE 1.5 2.2 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 10 10 10 15 15 15 15 15 15 15 15 15 15 22 22 22 22 22 22 22 22 22 C B B B C C B B C C C B B B C C C D C C D D D E C C D D D D D D D E E D D D D D D E E E E D D D D D E E E E PART NUMBER MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) 35 VDC AT + 85 °C; 23 VDC AT + 125 °C TR3C155(1)035(2)0900 0.5 TR3B225(1)035(2)2500 0.8 TR3B225(1)035(2)2000 0.8 TR3B225(1)035(2)1500 0.8 TR3C225(1)035(2)1500 0.8 TR3C225(1)035(2)0900 0.8 TR3B335(1)035(2)1500 1.2 TR3B335(1)035(2)1000 1.2 TR3C335(1)035(2)0800 1.2 TR3C335(1)035(2)0700 1.2 TR3C335(1)035(2)0600 1.2 TR3B475(1)035(2)1500 1.6 TR3B475(1)035(2)1000 1.6 TR3B475(1)035(2)0700 1.6 TR3C475(1)035(2)0700 1.6 TR3C475(1)035(2)0600 1.6 TR3C475(1)035(2)0500 1.6 TR3D475(1)035(2)0700 1.6 TR3C685(1)035(2)0900 2.4 TR3C685(1)035(2)0475 2.4 TR3D685(1)035(2)0500 2.4 TR3D685(1)035(2)0400 2.4 TR3D685(1)035(2)0300 2.4 TR3E685(1)035(2)0300 2.4 TR3C106(1)035(2)1200 3.5 TR3C106(1)035(2)0450 3.5 TR3D106(1)035(2)0400 3.5 TR3D106(1)035(2)0300 3.5 TR3D106(1)035(2)0260 3.5 TR3D106(1)035(2)0250 3.5 TR3D106(1)035(2)0200 3.5 TR3D106(1)035(3)0135 3.5 TR3D106(1)035(3)0125 3.5 TR3E106(1)035(2)0250 3.5 TR3E106(1)035(2)0200 3.5 TR3D156(1)035(2)0350 5.3 TR3D156(1)035(2)0300 5.3 TR3D156(1)035(2)0260 5.3 TR3D156(1)035(2)0225 5.3 TR3D156(1)035(2)0200 5.3 TR3D156(1)035(2)0150 5.3 TR3E156(1)035(2)0300 5.3 TR3E156(1)035(2)0225 5.3 TR3E156(1)035(2)0200 5.3 TR3E156(1)035(2)0150 5.3 TR3D226(1)035(2)0400 7.7 TR3D226(1)035(2)0300 7.7 TR3D226(1)035(2)0275 7.7 TR3D226(1)035(2)0250 7.7 TR3D226(1)035(2)0200 7.7 TR3E226(1)035(2)0300 7.7 TR3E226(1)035(2)0275 7.7 TR3E226(1)035(2)0260 7.7 TR3E226(1)035(2)0200 7.7 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 0.900 2.500 2.000 1.500 1.500 0.900 1.500 1.000 0.800 0.700 0.600 1.500 1.000 0.700 0.700 0.600 0.500 0.700 0.900 0.475 0.500 0.400 0.300 0.300 1.200 0.450 0.400 0.300 0.260 0.250 0.200 0.135 0.125 0.250 0.200 0.350 0.300 0.260 0.225 0.200 0.150 0.300 0.225 0.200 0.150 0.400 0.300 0.275 0.250 0.200 0.300 0.275 0.260 0.200 0.35 0.18 0.21 0.24 0.27 0.35 0.24 0.29 0.37 0.40 0.43 0.24 0.29 0.35 0.40 0.43 0.47 0.46 0.35 0.48 0.55 0.61 0.71 0.74 0.30 0.49 0.61 0.71 0.76 0.77 0.87 1.05 1.10 0.81 0.91 0.65 0.71 0.76 0.82 0.87 1.00 0.74 0.86 0.91 1.05 0.61 0.71 0.74 0.77 0.87 0.74 0.77 0.80 0.91 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 13 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (μF) CASE CODE PART NUMBER 0.15 0.22 0.33 0.47 0.47 1.0 1.0 1.0 1.5 1.5 2.2 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 6.8 6.8 10 10 10 10 10 10 10 10 15 15 A A A B C B B C B C B C D C D C C C D D D D E E D D D D E E D D D E E E E E E E TR3A154(1)050(2)10R0 TR3A224(1)050(2)10R0 TR3A334(1)050(2)7000 TR3B474(1)050(2)6000 TR3C474(1)050(2)2300 TR3B105(1)050(2)4000 TR3B105(1)050(2)2000 TR3C105(1)050(2)1600 TR3B155(1)050(2)2000 TR3C155(1)050(2)1500 TR3B225(1)050(2)2000 TR3C225(1)050(2)1500 TR3D225(1)050(2)0800 TR3C335(1)050(2)1500 TR3D335(1)050(2)0800 TR3C475(1)050(2)1000 TR3C475(1)050(2)0700 TR3C475(1)050(2)0500 TR3D475(1)050(2)0700 TR3D475(1)050(2)0600 TR3D475(1)050(2)0500 TR3D475(1)050(2)0300 TR3E475(1)050(2)0600 TR3E475(1)050(2)0300 TR3D685(1)050(2)0700 TR3D685(1)050(2)0600 TR3D685(1)050(2)0500 TR3D685(1)050(2)0300 TR3E685(1)050(2)0550 TR3E685(1)050(2)0500 TR3D106(1)050(2)0700 TR3D106(1)050(2)0550 TR3D106(1)050(2)0450 TR3E106(1)050(2)0700 TR3E106(1)050(2)0550 TR3E106(1)050(2)0500 TR3E106(1)050(2)0400 TR3E106(1)050(2)0300 TR3E156(1)050(2)0400 TR3E156(1)050(3)0300 4.7 10 D E TR3D475(1)063(2)0700 TR3E106(1)063(2)0600 MAX. DCL AT + 25 °C (μA) MAX. DF AT + 25 °C 120 Hz (%) MAX. ESR AT + 25 °C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 4 4 4 4 4 4 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 10.000 10.000 7.000 6.000 2.300 4.000 2.000 1.600 2.000 1.500 2.000 1.500 0.800 1.500 0.800 1.000 0.700 0.500 0.700 0.600 0.500 0.300 0.600 0.300 0.700 0.600 0.500 0.300 0.550 0.500 0.700 0.550 0.450 0.700 0.550 0.500 0.400 0.300 0.400 0.300 0.09 0.09 0.10 0.12 0.22 0.15 0.21 0.26 0.21 0.27 0.21 0.27 0.43 0.27 0.43 0.33 0.40 0.47 0.46 0.50 0.55 0.71 0.52 0.74 0.46 0.50 0.55 0.71 0.55 0.57 0.46 0.52 0.58 0.49 0.55 0.57 0.64 0.74 0.64 0.74 6 6 0.700 0.600 0.46 0.52 50 VDC AT + 85 °C; 33 VDC AT + 125 °C 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.8 0.8 1.1 1.1 1.1 1.7 1.7 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 3.4 3.4 3.4 3.4 3.4 3.4 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 63 VDC AT + 85 °C; 40 VDC AT + 125 °C 3.0 6.3 Note • Part number definitions: (1) Capacitance tolerance codes: K, M (2) Terminations and packaging codes: C, D, E, F (3) Lead (Pb)-free terminations and packaging codes: C, D Revision: 17-Jun-13 Document Number: 40080 14 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 63 38 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 63 32 TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY “D” Case “D” Case 1.00 1.00 68 µF, 20 VDC 0.10 IMPEDANCE ESR ESR/Z, Ω ESR/Z, Ω IMPEDANCE ESR 0.10 220 µF, 10 VDC 330 µF, 6.3 VDC 470 µF, 4 VDC 0.01 0.1 0.01 1.0 10.0 FREQUENCY kHz Revision: 17-Jun-13 100.0 1000.0 0.1 1.0 10.0 100.0 1000.0 FREQUENCY kHz Document Number: 40080 15 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TR3 www.vishay.com Vishay Sprague POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR A 0.075 B 0.085 C 0.110 D 0.150 E 0.165 V 0.125 W 0.250 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL A 2000 9000 B 2000 8000 C 500 3000 D 500 2500 E 400 1500 V 1000 5000 W 500 2000 PRODUCT INFORMATION Guide for Molded Tantalum Capacitors Pad Dimensions www.vishay.com/doc?40074 Packaging Dimensions Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 17-Jun-13 www.vishay.com/doc?40110 Document Number: 40080 16 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000