DAP222M3T5G Preferred Device Product Preview Common Anode Silicon Dual Switching Diodes These Common Anode Silicon Epitaxial Planar Dual Diodes are designed for use in ultra high speed switching applications. The DAP222 device is housed in the SOT−723 package which is designed for low power surface mount applications, where board space is at a premium. • Fast trr • Low CD • ESD Performance: Human Body Model; 2000 V, Machine Model 200 V • Available in 4 mm Tape and Reel • This is a Pb−Free Device http://onsemi.com ANODE 3 1 2 CATHODE MAXIMUM RATINGS (TA = 25°C) Rating Symbol Value Unit VR 80 V VRM 80 V IF 100 mA IFM 300 mA IFSM (Note 1) 2.0 Reverse Voltage Peak Reverse Voltage Forward Current Peak Forward Current Peak Forward Surge Current Power Dissipation 3 2 SOT−723 CASE 631AA STYLE 4 P9 M 1 A P9 M THERMAL CHARACTERISTICS Rating MARKING DIAGRAM Symbol Max Unit PD 260 mW Junction Temperature TJ 150 °C Storage Temperature Tstg −55 ~ + 150 °C Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. t = 1.0 S. = Specific Device Code = Date Code ORDERING INFORMATION Device Package Shipping† DAP222M3T5G SOT−723 8000/Tape & Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D. Preferred devices are recommended choices for future use and best overall value. This document contains information on a product under development. ON Semiconductor reserves the right to change or discontinue this product without notice. Semiconductor Components Industries, LLC, 2005 March, 2005 − Rev. 1 1 Publication Order Number: DAP222M3/D DAP222M3T5G ELECTRICAL CHARACTERISTICS (TA = 25°C) Characteristic Symbol Condition Min Max Unit Reverse Voltage Leakage Current IR VR = 70 V − 0.1 A Forward Voltage VF IF = 100 mA − 1.2 V Reverse Breakdown Voltage VR IR = 100 A 80 − V Diode Capacitance CD VR = 6.0 V, f = 1.0 MHz − 3.5 pF trr (Note 2) IF = 5.0 mA, VR = 6.0 V, RL = 100 , Irr = 0.1 IR − 4.0 ns Reverse Recovery Time 2. trr Test Circuit for DAP222 in Figure 4. http://onsemi.com 2 DAP222M3T5G TYPICAL ELECTRICAL CHARACTERISTICS 10 IR , REVERSE CURRENT (µA) TA = 85°C 10 TA = −40°C 1.0 0.1 TA = 25°C 0.2 0.4 0.6 0.8 1.0 VF, FORWARD VOLTAGE (VOLTS) TA = 125°C 1.0 TA = 85°C 0.1 TA = 55°C 0.01 0.001 1.2 TA = 150°C TA = 25°C 10 0 Figure 1. Forward Voltage 50 20 30 40 VR, REVERSE VOLTAGE (VOLTS) Figure 2. Reverse Current 1.75 CD , DIODE CAPACITANCE (pF) IF, FORWARD CURRENT (mA) 100 1.5 1.25 1.0 0.75 0 2 4 6 8 VR, REVERSE VOLTAGE (VOLTS) Figure 3. Diode Capacitance tr tp t IF trr t 10% A RL Irr = 0.1 IR 90% VR tp = 2 s tr = 0.35 ns INPUT PULSE RECOVERY TIME EQUIVALENT TEST CIRCUIT Figure 4. Reverse Recovery Time Test Circuit http://onsemi.com 3 IF = 5.0 mA VR = 6 V RL = 100 OUTPUT PULSE DAP222M3T5G PACKAGE DIMENSIONS SOT−723 CASE 631AA−01 ISSUE B NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS OR GATE BURRS. −X− D A b1 −Y− 3 E 1 e HE L 2 b 2X 0.08 (0.0032) X Y DIM A b b1 C D E e HE L C MILLIMETERS MIN NOM MAX 0.45 0.50 0.55 0.15 0.21 0.27 0.25 0.31 0.37 0.07 0.12 0.17 1.15 1.20 1.25 0.75 0.80 0.85 0.40 BSC 1.15 1.20 1.25 0.15 0.20 0.25 INCHES MIN NOM MAX 0.018 0.020 0.022 0.0059 0.0083 0.0106 0.010 0.012 0.015 0.0028 0.0047 0.0067 0.045 0.047 0.049 0.03 0.032 0.034 0.016 BSC 0.045 0.047 0.049 0.0059 0.0079 0.0098 STYLE 4: PIN 1. CATHODE 2. CATHODE 3. ANODE SOLDERING FOOTPRINT* 0.40 0.0157 0.40 0.0157 1.0 0.039 0.40 0.0157 0.40 0.0157 0.40 0.0157 SCALE 20:1 mm inches *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 4 For additional information, please contact your local Sales Representative. DAP222M3/D