OTS-1VTR2ATR4DTR ® Optiva Standard, 1 Duplex Composite Video, 2 Duplex Audio and 4 Duplex RS-232/422/485 Data Composite Video, Audio and Data Transmission Video The OTS-1VTR2ATR4DTR provides for the digital transmission of 1 Channel of Duplex Composite Video, 2 Channels of Duplex Analog Audio and 4 Channels of Duplex Serial Data. ST, LC, SC or FC ST, LC, SC or FC Composite Video In Serial Data In/Out Composite Video Out System Design Audio Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva Desktop Card Racks (OT-DTCR Series). Audio In/Out The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Composite Video Out Serial Data In/Out Composite Video In Audio In/Out OTS-1VTR2ATR4DTR OTS-1VRT2ART4DRT Features • Composite Video, Analog Audio and Serial Data over one fiber • 12-Bit Digital Transmission (Video) • TDM - Single fiber, dual wavelength • Complies with SMPTE 259M for uncompressed SDI Optiva® Upgrade Path This system can be purchased without an optical port as an add-on to an existing Optiva® system daisy-chain. (See “Non-Optical Version” below). • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Professional AV applications The Optiva® bandwidth requirement of this system is 397 Mbps. Versions Available* Wavelength (nm) & Fiber 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) Transmit/Receive** Receive/Transmit** OTS-1VTR2ATR4DTR- A1/A3M-XX-IC OTS-1VTR2ATR4DTR- A2/A3-XX-IC OTS-1VTR2ATR4DTR-A2/A3D-XX-IC OTS-1VTR2ATR4DTR-A2/A3H-XX-IC OTS-1VTR2ATR4DTR-L4/L4-XX-IC OTS-1VRT2ART4DRT-A3M/A1-XX-IC OTS-1VRT2ART4DRT-A3/A2-XX-IC OTS-1VRT2ART4DRT-A3D/A2-XX-IC OTS-1VRT2ART4DRT-A3H/A2-XX-IC OTS-1VRT2ART4DRT-L4/L4-XX-IC Non-Optical Version OTS-1VTR2ATR4DTR-NOC-IC OTS-1VRT2ART4DRT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (2-slots) IC (2-slots) IC (2-slots) IC (2-slots) IC (2-slots) N/A N/A N/A IC (2-slots) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm; "ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z. * Contact Opticomm for other versions available. * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Passband Ripple Chroma/Luma Delay Compatibility Signal to Noise Ratio Connector Analog Audio Level Bandwidth Signal to Noise Ratio Total Harmonic Distortion Signal Coding Connector Data RS-232, RS-422 RS-485 (2 Wire) RS-485 (4 Wire) Data Rate Connector Contact Closure Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Sample Configuration Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform SMPTE 170M; RS-250C (Short Haul) 12-Bit Digital Transmission 1.0 Volt p-p 5.5 MHz < 2% < 0.7° < ±0.2 dB to 5.5 MHz <12ns NTSC, PAL, SECAM > 67 dB BNC (IEC 60169-8) 6 dBm In/Out 20 Hz to 20 KHz > 80 dB < 0.1% 20-bit Micro DB25 Impedance Options: Input Balanced 600 Ohm Balanced Hi-Z Unbalanced Hi-Z Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Output Balanced 600 Ohm Balanced Low-Z Unbalanced Low-Z Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & DC to 1 Mbps Micro DB25 Power Supplies Supplies Power and Accessories & Accessories Micro DB25 Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 11 oz < 7w per insert card Less than 1ms (Audio <10ms) LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA