OTS-8V Optiva Standard, 8 Composite Video ® Composite Video The OTS-8V provides for the digital transmission of 8 Channels of Composite Video. System Design Video Audio Data All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva Desktop Card Racks (OT-DTCR Series). The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. Composite Video In A L E R T S T A T U S A L E R T S T A T U S A L E R T S T A T U S Composite Video In Composite Video In Composite Video Out A L E R T S T A T U S A L E R T S T A T U S A L E R T S T A T U S ST, LC, SC or FC Composite Video Out Composite Video Out ST, LC, SC or FC Optiva™ Optiva™ Optiva™ Optiva™ Optiva™ Optiva™ VAD Transmission VAD Transmission VAD Transmission VAD Transmission VAD Transmission VAD Transmission OTS-8VT OTS-8VR Features • Composite Video over one fiber • 12-Bit Digital Transmission • TDM - Single Wavelength • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount • Ideal for Broadcast Professional AV applications Versions Available* Wavelength (nm) & Fiber Transmit** Receive** Optical Connector Optical Budget (dB) Range*** (km) Form Factor 1310 Multimode 1310 Singlemode 1310 Singlemode (D) 1550 Singlemode 1550 Singlemode (D) 1270-1610 SM (CWDM) OTS-8VT-B1-XX-IC OTS-8VT-B2-XX-IC OTS-8VT-B2D-XX-IC OTS-8VT-B3-XX-IC OTS-8VT-B3D-XX-IC OTS-8VT-L4-XX-IC OTS-8VR-B1-XX-IC OTS-8VR-B2-XX-IC OTS-8VR-B2D-XX-IC OTS-8VR-B3-XX-IC OTS-8VR-B3D-XX-IC OTS-8VR-L4-XX-IC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 7 12 17 25 Varies 1.5 10 20 40 60 20-70 IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) IC (3-slots) Non-Optical Version OTS-8VT-NOC-IC OTS-8VR-NOC-IC N/A N/A N/A IC (3-slot) * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Passband Ripple Chroma/Luma Delay Compatibility Signal to Noise Ratio Connector General Dimensions & Weight Operating temperature Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform SMPTE 170M; RS-250C (Short Haul) 12-Bit Digital Transmission 1.0 Volt p-p 5.5 MHz < 2% < 0.7° < ±0.2 dB to 5.5 MHz <12ns NTSC, PAL, SECAM > 67 dB BNC (IEC 60169-8) Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC < 7w per insert card Less than 1ms LED Status Indication 11 oz Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions Enclosures, Racks Racks Enclosures, & Frames Frames & Power Supplies Supplies Power and Accessories & Accessories Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA Sample Configuration