OTS-8LV1ETR2DJTR Optiva Standard, 8 Composite Video, 10/100 Ethernet and 2 RS-422 Serial Data Channels ® Composite Video, Ethernet and Serial Data The OTS-8LV1ETR2DJTR provides for the digital transmission of 8 channels of Composite Video, 1 channel of Ethernet and 2 channels of RS-422 Serial Data. Video Audio Data Ethernet System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva® Desktop Card Racks (OT-DTCR Series). The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. OTS-8LVT1ETR2DJTR OTS-8LVR1ERT2DJRT Features • 10-bit digital processing • 10/100 auto-sensing Ethernet Upgrade Path The system has an optional upgrade path to increase the amount of video channels from 8 to 16. Please contact your sales rep for details. • Complies with SMPTE standards for Video transmission • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Stand alone or rack-mount Optical Specifications • Ideal for Security Camera or CCTV Applications CWDM Tx Optical Output Power Tx CWDM Wavelengths Rx Optical Overload Rx Optical Sensitivity CWDM Wavelength Codes • Dual fiber, CWDM wavelength >+2 dBm 1270-1610 nm -8 dBm -30 dBm Models Available* OTS-8LVT1ETR2DJTR-L4XX/L4XX-LC-IC OTS-8LVR1ERT2DJRT-L4XX/L4XX-LC-IC * Substitution of CWDM optical wavelengths requird to complet model numbers. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Bit Resolution Level Impedance Bandwidth Differential Gain Differential Phase DC Offset Compatibility Signal to Noise Ratio Connector Ethernet Standard Data Rate Connector Data RS-232 RS-422 RS-485 (2 wire) RS-485 (4 wire) General Dimensions & Weight Operating Temperature Storage Temperature Humidity Operating Voltage Consumption System Latency Local Monitoring Remote Monitoring Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform 10-bit digital architecture 1.0 Volt p-p 75 Ohm - 3 dB @ 7 MHz < 2% < 0.7° <150 mV NTSC, PAL, SECAM > 65 dB BNC (IEC 60169-8) Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & Data Audio & Data Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF IEEE 802.3 (auto-sensing) 10/100 Mbps RJ-45 Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions Up to 200 Kbps Up to 1 Mbit Up to 1 Mbit Up to 1 Mbit Insert Card (IC): 6.3” L x 0.8” W x 4.0” H -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC < 7w per insert card Less than 1ms Enclosures, Racks Racks Enclosures, & Frames & Frames Power Supplies Supplies Power and Accessories & Accessories 11 oz LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA