MUR460A GLASS PASSIVATED JUNCTION Ultra fast Plastic Rectifiers VOLTAGE: 600V CURRENT:4.0A DO-201AD FEATURE Plastic package has Underwriters Laboratories lammability Classification 94V-0 Ideally suited for use in very high frequency switching ower supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High temperature soldering guaranteed: 250℃/10 seconds, 0.375" (9.5mm) lead length, 5 lbs. (2.3kg) tension MECHANICAL DATA Case: JEDEC DO-201AD molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight: 0.045 oz., 1.2 g Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60Hz, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25℃ Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Typical thermal resistance junction to ambient Storage and Operating Temperature Range Symbol MUR460A units Vrrm Vrms Vdc If(av) 600 420 600 4.0 V V V A Ifsm 175 A Vf 1.28 V Trr 45 10 100 26 -55 to +175 nS Ta =25℃ Ta =125℃ (Note 2) Ir Rth(ja) Tstg, Tj µA ℃/W ℃ Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2. Lead length = 1/2” on P.C. board with 1.5” x1.5” copper surface Rev.A2 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES MUR460A Rev.A2 www.gulfsemi.com