FERP20D Ultra fast Plastic Power Rectifiers VOLTAGE: 200V CURRENT:20.0A FEATURE ITO-220AB Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High voltage and high reliability High speed switching Low forward voltage MECHANICAL DATA Case: JEDEC ITO-220 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC blocking Voltage Maximum Average Forward Rectified at Tc =100℃ Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load Maximum Forward Voltage at Forward Current 10A and 25℃ Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current at rated DC blocking voltage SYMBOL FERP20D units Vrrm Vrms Vdc If(av) 200 140 200 20.0 V V V A Ifsm 180 A Vf 1.0 V Trr 50 10 100 4.5 -55 to +150 nS Ta =25℃ Ta =125℃ Typical thermal resistance junction to case Storage and Operating Temperature Range Ir Rth(jc) Tstg, Tj µA ℃/W ℃ Note: 1. Rev.A1 Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES FERP20D Rev.A1 www.gulfsemi.com