UESP08D Ultra fast Plastic Power Rectifiers VOLTAGE: 200V CURRENT:8.0A FEATURE ITO-220AC Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time Glass passivated junction Low switching losses, high efficiency Low leakage current High forward surge capability MECHANICAL DATA Case: JEDEC ITO-220AC molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: 10 in-lbs maximum Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL UESP08D units Maximum Recurrent Peak Reverse Voltage Vrrm 200 V Maximum RMS Voltage Vrms 140 V Vdc 200 V If(av) 8.0 A Ifsm 125 A Vf 0.95 V Trr 35 nS Rth(jc) 5.0 °C/W Ir 10 400 µA Tstg, Tj -55 to +150 °C Maximum DC blocking Voltage Maximum Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =100°C Storage and Operating Temperature Range Note: Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UESP08D Rev.A1 www.gulfsemi.com