UGSA08D Ultra fast Plastic Power Rectifiers VOLTAGE: 200V CURRENT: 8.0A FEATURE TO-220AC Plastic package has Underwriters Laboratories Flammability Classification 94V-0 Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes Ultra fast recovery time for high efficiency Excellent high temperature switching Glass passivated junction High voltage and high reliability High speed switching Low forward voltage MECHANICAL DATA Case: JEDEC TO-220 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) Maximum Maximum Maximum Maximum Recurrent Peak Reverse Voltage RMS Voltage DC blocking Voltage Average Forward Rectified at Tc =100°C Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load Maximum Forward Voltage at rated Forward Current and 25°C Maximum Reverse Recovery Time (Note 1) Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =100°C Typical junction capacitance (Note 2) Typical thermal resistance junction to case Storage and Operating Temperature range SYMBOL UGSA08D units Vrrm Vrms Vdc 200 140 200 V V V If(av) 8.0 A Ifsm 150 A Vf 1.05 V Trr 20 10 300 45 4.0 -55 to +150 nS Ir Cj Rth(jc) Tstg, Tj µA pF °C/W °C Note: 1.Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A 2.Measured at 1.0MHz and applied reverse voltage of 4.0 Volts Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGSA08D Rev.A1 www.gulfsemi.com