UGSB08J Ultra fast Plastic Power Rectifiers VOLTAGE: 600V CURRENT:8.0A TO-263AB/D2PACK FEATURE • Plastic package has Underwriters Laboratories Flammability Classification 94V-0 • Ideally suited for use in very high frequency switching power supplies, inverters and as free wheeling diodes • Ultra fast recovery time for high efficiency • Excellent high temperature switching • Glass passivated junction •High voltage and high reliability • High speed switching • Low forward voltage MECHANICAL DATA Case: JEDEC TO-220 molded plastic body over passivated chip Terminals: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half-wave, 60HZ, resistive or inductive load rating at 25°C, unless otherwise stated) SYMBOL UGSB08J units Maximum Recurrent Peak Reverse Voltage Vrrm 600 V Maximum RMS Voltage Vrms 420 V Vdc 600 V If(av) 8.0 A Ifsm 80 A Vf 2.3 V Trr 25 nS Rth(jc) 2.2 Ir 30 400 µA Tstg -65 to +175 °C Tj 175 °C Maximum DC blocking Voltage Maximum Average Forward Rectified at Tc =130°C Peak Forward Surge Current Tp=10ms sinusoidal Maximum Forward Voltage at rated Forward Current and 25°C at 8A Maximum Reverse Recovery Time (Note 1) Typical thermal resistance junction to case Maximum DC Reverse Current at rated DC blocking voltage Ta =25°C Ta =125°C Storage temperature range Maximum Operating junction temperature °C/W Note: 1. Reverse Recovery Condition If =0.5A, Ir =1.0A, Irr =0.25A Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES UGSB08J Rev.A1 www.gulfsemi.com