ABRIDGED DATA SHEET 19-5091; Rev 3; 1/10 KIT ATION EVALU E L B A IL AVA High-Performance Secure RISC Microcontroller Features ♦ High-Performance 32-Bit MAXQ30 RISC Core ♦ DC to 25MHz Operation, Approaching 1MIPS per MHz ♦ Dual 1.8V Core/3.3V I/O Enables Low Power/ Flexible Interfacing ♦ 5V Tolerant I/O ♦ Up to 32 General-Purpose I/O Pins ♦ 34 Instructions, Most Single Cycle ♦ Three Independent Data Pointers Accelerate Data Movement with Automatic Increment/Decrement ♦ Virtually Unlimited Software Stack ♦ 16-Bit Instruction Word, 32-Bit Internal Data Bus ♦ 16 x 32-Bit Accumulators ♦ Security Features 3DES-Encrypted External Memory Bus Prevents Eavesdropping Tamper Sensors Instantaneously “Zeroize” Internal Keys and User Data When: Out-of-Range Temperature/Voltage Detected User-Defined Self-Destruct Inputs (SDIx) Activated Internal Cryptographic Hardware Includes: DES Engine Supporting Single DES and 2/3-Key 3DES Operations Public-Key Cryptographic Accelerator for ECDSA (160-, 192-, and 256-Key Strength) Public-Key Cryptographic Accelerator for DSA and RSA (1024- and 2048-Key Strength) Hardware Hash Engine Supports SHA-1, SHA-224, and SHA-256 Unresettable True-Time Clock Self-Imposes Expiration Dates and Date/Timestamping ♦ Memory Features Secure Memory Protection Unit and 4KB Instruction Cache 512KB of Internal Flash Program Memory 3KB Internal Program Memory SRAM 32KB Internal Data SRAM, Including 1KB BatteryBacked NV SRAM Linear Address Space Directly Accesses Up to 8MB of External Program/Data Memory ♦ Peripheral Features USB Device Controller with Four Endpoint Buffers ISO 7816 UART with FIFO with Two Physically Separate Communication Buses ♦ Power Management Features ♦ In-System Programming Through Debug Port or Serial Port ♦ Ultra-Low Battery Leakage to Support NV RAM and Security Sensors (150nA) Applications Electronic Commerce PCI Terminals PIN Pads ATM Keyboards EMV™ Banking Secure Access Control Secure Data Storage Pay-per-Play Certificate Authentication Electronic Signature Generator Ordering Information PART TEMP RANGE PINTAMPER PACKAGE RESPONSIVE MAXQ1103-ENS+ -40°C to +85°C 144 TQFP +Denotes a lead(Pb)-free/RoHS-compliant package. Yes Pin Configuration and Typical Application Circuit appear at end of data sheet. MAXQ is a registered trademark of Maxim Integrated Products, Inc. EMV is a trademark owned by EMVCo. LLC. See the Detailed Features section for complete list of features. Note: Some revisions of this device may incorporate deviations from published specifications known as errata. Multiple revisions of any device may be simultaneously available through various sales channels. For information about device errata, contact the factory. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com. 1 MAXQ1103 General Description The MAXQ1103 microcontroller is a low-power, 32-bit RISC device that combines high-performance, singlecycle processing, sophisticated tamper-detection technology, and cryptographic hardware. Advanced security features are designed to meet the stringent requirements of regulations such as ITSEC E3 High, FIPS 140-2 Level 3, and the Common Criteria Certifications. The MAXQ1103 is targeted at electronic commerce, banking, and data security systems that require the highest levels of secure access control, secure data storage, digital signature, or certificate authentication. A secure memory protection unit protects critical internal and external memory against tampering with triple-DES (3DES) encryption. Tamper sensors instantly zeroize critical encryption keys when physical intrusion is detected. A 32-bit MAXQ30 core powers the cryptographically secure MAXQ1103. Applications are supported with 512KB of high-performance internal flash memory for code/data storage and 32KB SRAM. Up to 8MB of additional external program and data memory is supported through a dedicated word-wide memory bus with programmable wait states. Additional peripherals such as serial I/O, 16-bit timers, hardware math accelerator, ISO 7816 UART, and a USB controller increase system utility while reducing component count. System security is enhanced by the addition of highspeed cryptographic hardware accelerators for ECDSA, DSA, RSA, Secure Hash Algorithm, and triplekey 3DES. The embedded hash engine supports multiple hash functions recommended by the National Institute of Standards and Technology (NIST). The true hardware random-number generator (RNG) supports FIPS 186-2 with an available software library. ABRIDGED DATA SHEET High-Performance Secure RISC Microcontroller RANDOM-NUMBER GENERATOR (RNG) CRC-16/32 GENERATOR DES/3DES USER ENGINE MULTIPLYACCUMULATE UNIT SHA MAXQ1103 INTERNAL 55MHz OSC 2048-BIT MODULO ARITHMETIC ACCELERATOR 16K x 16 ROM RESET PROG SDI[1:7] SDBE USART 0 TIMER 2 JTAG 256K x 16 FLASH 512 x 16 SRAM INTERNAL PROGRAM MEMORY INTERNAL DATA MEMORY HIGH/LOW TEMPERATURE SENSORS RESET AND DESTRUCT RESET EXTERNAL CODE INTEGRITY CHECKER WATCHDOG INSTRUCTION CACHE 2K x 16 MAXQ30 PIPELINED RISC CORE TIMER 1 TIMER 3 HFXIN HFXOUT PORT 2 16K x 16 SRAM 1.5K x 16 SRAM EDGE INTERRUPTS POWERSUPPLY MONITORING USART 1 MMU DES/3DES PROGRAM MEMORY DECRYPTOR PLL (4X/2X) DATA MEMORY ENCRYPTOR/ DECRYPTOR DES KEYS TIMER 0 ISO 7816 UART AND FIFO CLOCK GENERATION INTERNAL 20MHz OSC PORT 1 VDDIO (+3.3V) VDD (+1.8V) VBAT (+3V) GND VDDO VRST PF USB PORT 3 REAL-TIME CLOCK PORT 0 32KIN 32KOUT GND2 AD[19:0] PES2 ED[31:0] PES1 DCS2 DCS2N DCS1 DCS1N PCS2 PCS2N PCS1N B3 PCS1 B2 B1 B0 R/W EXTERNAL PROGRAM AND DATA MEMORY INTERFACE BATTERY BACKED Note to readers: This document is an abridged version of the full data sheet. To request the full data sheet, go to www.maxim-ic.com/MAXQ1103 and click on Request Full Data Sheet. ______________________________________________________________________________________ 15 MAXQ1103 Functional Diagram