ONSEMI NCS2584

NCS2584
Four-Channel Video Driver
with Load Detection and
Signal Detection
The NCS2584 is a 4−channel high speed video driver with 6th order
Butterworth Reconstruction filters on each channel. A first set of
3−channel has High Definition (HD) 34 MHz filters, one per channel.
A fourth channel offers an extra driver for Cvbs−type video signal
with an 8 MHz filter. The NCS2584 is in fact a combination of a triple
HD video driver plus a single Cvbs video driver.
In addition, this four channel video driver integrates an auto
shutdown function in order to detect the moment when the DAC is
turned on or off. It also embeds a load detection to lower the power
consumption when the TV is unplugged. To further reduce the layout
and software complexity, the NCS2584 will automatically turn off
without any external command. These features help significantly the
systems like Blu−Ray™ players or Set Top Boxes to be in line with the
restricting energy saving standards on standby modes.
It is designed to be compatible with Digital−to−Analog Converters
(DAC) embedded in most video processors.
All channels can accept DC or AC coupled signals. In case of
AC−coupled inputs, the internal clamps are enabled. The outputs can
drive both AC and DC coupled 150 W loads but also two loads of
150 W in parallel.
Features
http://onsemi.com
MARKING
DIAGRAM
14
14
1
TSSOP−14
CASE 948G
A, AA
Y
W
G
1
NCS
2584
ALYW
= Assembly Location
= Year
= Work Week
= Pb−Free Package
*For additional marking information, refer to
Application Note AND8473/D.
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 15 of this data sheet.
• 3 High Definition Filters with 6th Order Butterworth Filter and
34 MHz Bandwidth for YPbPr 1080i
• One Cvbs Driver Including 6th Order Butterworth 8 MHz Filter
• Integrated Automatic Shutdown Function to Improve Power
•
•
•
•
•
•
•
•
Consumption Savings When the DAC is Off
Integrated Load Detection for TV Presence
Low Pin Count for Layout Simplification
Internal Fixed Gain: 6 dB $0.2
AC or DC Coupled Inputs and Outputs
Each channel Capable to Drive 2 Loads of 150 W in Parallel
Operating Supply Voltage Range: +3.3 V and 5.0 V
TSSOP14 Package
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
Related Resource:
Refer to Application Note AND9046/D for details
regarding Load Detection and Application Note
AND8473/D for details on input video signal
detection
Typical Application
• Set Top Box Decoder
• DVD and Blu−Ray Player / Recorder
• HDTV, Home Theatre
© Semiconductor Components Industries, LLC, 2012
August, 2012 − Rev. 0
1
Publication Order Number:
NCS2584/D
NCS2584
Cvbs IN
HD IN1
HD IN2
HD IN3
GND
NC
NC
14
13
12
11
10
9
8
1
2
3
4
5
6
7
Cvbs OUT
HD OUT1
HD OUT2
HD OUT3
VCC
NC
NC
(Top View)
Figure 1. Pinouts
NCS2584
Shutdown
Detection
Cvbs IN
1
Transparent Clamp
6 dB
14 Cvbs OUT
6 dB
13 HD OUT1
6 dB
12 HD OUT2
6 dB
11 HD OUT3
8 MHz, 6th Order
HD IN1
2
Transparent Clamp
34 MHz, 6th Order
HD IN2
3
Transparent Clamp
34 MHz, 6th Order
HD IN3
4
Transparent Clamp
34 MHz, 6th Order
Output Load
Detection
10 VCC
GND
5
NC
6
9
NC
NC
7
8
NC
Figure 2. NCS2584 TSSOP−14 Block Diagram
http://onsemi.com
2
NCS2584
TSSOP−14 PIN DESCRIPTION
Pin No.
Name
Type
1
Cvbs IN
Input
Cvbs Input Channel
Description
2
HD IN1
Input
High Definition Input 1
3
HD IN2
Input
High Definition Input 2
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ
4
HD IN3
Input
High Definition Input 3
5
GND
Ground
6
NC
NC
No Connection
7
NC
NC
No Connection
8
NC
NC
No Connection
9
NC
NC
No Connection
Ground
10
VCC
Power
Power Supply 3.3 V or 5 V
11
HD OUT3
Output
High Definition Output 3
12
HD OUT2
Output
High Definition Output 2
13
HD OUT1
Output
High Definition Output 1
14
Cvbs OUT
Output
Cvbs Output Channel
http://onsemi.com
3
NCS2584
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Power Supply Voltages
VCC
−0.3 v VCC v 5.5
Vdc
Input Voltage Range
VI/O
−0.3 v VI v VCC
Vdc
Input Differential Voltage Range
VID
−0.3 v VI v VCC
Vdc
Output Current (Indefinitely) per Channel
IO
40
mA
Maximum Junction Temperature (Note 1)
TJ
150
°C
Operating Ambient Temperature
TA
−40 to +85
°C
Storage Temperature Range
Tstg
−60 to +150
°C
Thermal Resistance, Junction−to−Air
RqJA
125
°C/W
ESD Protection Voltage (HBM)
Vesd
6000
V
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Power dissipation must be considered to ensure maximum junction temperature (TJ) is not exceeded.
1800
The maximum power that can be safely dissipated is
limited by the associated rise in junction temperature. For
the plastic packages, the maximum safe junction
temperature is 150°C. If the maximum is exceeded
momentarily, proper circuit operation will be restored as
soon as the die temperature is reduced. Leaving the device
in the “overheated” condition for an extended period can
result in device burnout. To ensure proper operation, it is
important to observe the derating curves.
1600
POWER DISSIPATION (mV)
Maximum Power Dissipation
1400
1200
1000
800
600
400
200
0
−40 −30−20−10
0 10 20 30 40 50 60 70 80 90100
TEMPERATURE (°C)
Figure 3. Power Dissipation vs Temperature
http://onsemi.com
4
NCS2584
DC ELECTRICAL CHARACTERISTICS (VCC = +3.3 V, TA = 25°C; unless otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
POWER SUPPLY
ICC
All channel Loaded 150 W, signal on all inputs, including the load current
73
120
mA
ICC sh1
Shutdown current, no load, no input signal
5
10
mA
ICC sh2
Shutdown current, no load, with input signal on all inputs
9
40
ICC SD
Only the SD channel loaded 150 W, signal on all inputs
20
mA
ICC HD
Only the 3 HD channels loaded 150 W, signal on all inputs
53
mA
mA
DC PERFORMANCE
Vcm
Input Common Mode Voltage Range
VOH
Output Voltage High Level
VOL
Output Voltage Low Level
IO
Output Current
VCC = 3.3 V or 5 V
GND
VCC
−0.4
1.4
VCC
−0.25
280
VPP
V
400
38
mV
mA
AC ELECTRICAL CHARACTERISTICS FOR STANDARD DEFINITION CHANNELS (VCC = +3.3 V, Vin = 1 VPP,
Rsource = 75 W, TA = 25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz;
unless otherwise specified)
Symbol
Min
Typ
Max
Unit
AVSD
Voltage Gain
Characteristics
Vin = 1 V − All SD Channels
Conditions
5.8
6.0
6.2
dB
BWSD
Low Pass Filter Bandwidth
−1 dB (Note 2)
−3 dB
5.5
6.5
7.2
8.0
MHz
ARSD
Stop−band Attenuation
Stop−band Attenuation (Note 2)
@ 16 MHz
@ 27 MHz
18
43
25
50
dB
dGSD
Differential Gain Error
0.7
%
dFSD
Differential Phase Error
0.7
°
THD
Total Harmonic Distortion
Vout = 1.4 VPP @ 3.58 MHz
0.35
%
XSD
Channel−to−Channel Crosstalk
@ 1 MHz and Vin = 1.4 VPP
−57
dB
SNRSD
Signal−to−Noise Ratio
NTC−7 Test Signal, 100 kHz
to 4.2 MHz (Note 3)
72
dB
DtSD
Propagation Delay
@ 4.5 MHz
70
ns
DGDSD
Group Delay Variation
100 kHz to 8 MHz
20
ns
2. Guaranteed by characterization.
3. SNR = 20 x log (714 mV / RMS noise)
http://onsemi.com
5
NCS2584
AC ELECTRICAL CHARACTERISTICS FOR HIGH DEFINITION CHANNELS (VCC = +3.3 V, Vin = 1 VPP, Rsource = 75 W,
TA = 25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise
specified)
Symbol
Min
Typ
Max
Unit
AVHD
Voltage Gain
Characteristics
Vin = 1 V − All HD Channels
Conditions
5.8
6.0
6.2
dB
BWHD
Low Pass Filter Bandwidth
−1 dB (Note 4)
−3 dB
26
30
31
34
MHz
ARHD
Stop−band Attenuation
@ 44.25 MHz
@ 74.25 MHz (Note 4)
8
33
15
42
dB
THDHD
Total Harmonic Distortion
Vout = 1.4 VPP @ 10 MHz
Vout = 1.4 VPP @ 15 MHz
Vout = 1.4 VPP @ 20 MHz
0.4
0.6
0.8
%
XHD
Channel−to−Channel Crosstalk
@ 1 MHz and Vin = 1.4 VPP
−60
dB
SNRHD
Signal−to−Noise Ratio
White Signal, 100 kHz to 30 MHz,
(Note 5)
72
dB
DtHD
Propagation Delay
25
ns
DGDHD
Group Delay Variation from 100 kHz to
30 MHz
10
ns
4. Guaranteed by characterization.
5. SNR = 20 x log (714 mV / RMS noise)
TIMING CHARACTERISTICS (VCC = +3.3 V, Vin = 1 VPP, Rsource = 75 W, TA = 25°C, inputs AC−coupled with 0.1 mF, all outputs
AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise specified)
Symbol
Characteristics
Ton
Turn ON Time (Note 6)
Toff
Turn OFF Time
Conditions
When 0 V Detected on Inputs
6. Guaranteed by characterization.
http://onsemi.com
6
Min
Typ
Max
Unit
2
10
ms
200
400
ms
NCS2584
DC ELECTRICAL CHARACTERISTICS (VCC = +5 V, TA = 25°C; unless otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
POWER SUPPLY
ICC
All channel Loaded 150 W, signal on all inputs, including the load current
88
120
mA
ICC sh1
Shutdown current, no load, no input signal
7
10
mA
ICC sh2
Shutdown current, no load, with input signal on all inputs
11
40
ICC SD
Only the SD channel loaded 150 W, signal on all inputs
22
mA
ICC HD
Only the 3 HD channels loaded 150 W, signal on all inputs
66
mA
mA
DC PERFORMANCE
Vcm
Input Common Mode Voltage Range
VOH
Output Voltage High Level
VOL
Output Voltage Low Level
IO
Output Current
VCC = 3.3 V or 5 V
GND
VCC
−0.4
1.4
VPP
VCC
−0.25
280
V
400
38
mV
mA
AC ELECTRICAL CHARACTERISTICS FOR STANDARD DEFINITION CHANNELS (VCC = +5 V, Vin = 1 VPP, Rsource =
75 W, TA = 25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless
otherwise specified)
Symbol
Characteristics
Min
Typ
Max
Unit
Vin = 1 V − All SD Channels
5.8
6.0
6.2
dB
−1 dB (Note 7)
−3 dB
5.5
6.5
7.2
8.0
@ 16 MHz
@ 27 MHz
18
43
25
50
dB
Differential Gain Error
0.7
%
dFSD
Differential Phase Error
0.7
°
THD
Total Harmonic Distortion
Vout = 1.4 VPP @ 3.58 MHz
0.35
%
XSD
Channel−to−Channel Crosstalk
@ 1 MHz and Vin = 1.4 VPP
−57
dB
SNRSD
Signal−to−Noise Ratio
NTC−7 Test Signal, 100 kHz
to 4.2 MHz (Note 8)
72
dB
DtSD
Propagation Delay
@ 4.5 MHz
70
ns
DGDSD
Group Delay Variation
100 kHz to 8 MHz
20
ns
AVSD
Voltage Gain
BWSD
Low Pass Filter Bandwidth
ARSD
Stop−band Attenuation
Stop−band Attenuation (Note 7)
dGSD
Conditions
7. Guaranteed by characterization.
8. SNR = 20 x log (714 mV / RMS noise)
http://onsemi.com
7
MHz
NCS2584
AC ELECTRICAL CHARACTERISTICS FOR HIGH DEFINITION CHANNELS (VCC = 5 V, Vin = 1 VPP, Rsource = 75 W, TA =
25°C, inputs AC−coupled with 0.1 mF, all outputs AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise specified)
Symbol
Characteristics
Conditions
Min
Typ
Max
Unit
6.2
dB
AVHD
Voltage Gain
Vin = 1 V − All HD Channels
5.8
6.0
BWHD
Low Pass Filter Bandwidth
−1 dB (Note 9)
−3 dB
26
30
31
34
MHz
ARHD
Stop−band Attenuation
@ 44.25 MHz
@ 74.25 MHz (Note 9)
8
33
15
42
dB
THDHD
Total Harmonic Distortion
Vout = 1.4 VPP @ 10 MHz
Vout = 1.4 VPP @ 15 MHz
Vout = 1.4 VPP @ 20 MHz
0.4
0.6
0.8
%
XHD
Channel−to−Channel Crosstalk
@ 1 MHz and Vin = 1.4 VPP
−60
dB
SNRHD
Signal−to−Noise Ratio
White Signal, 100 kHz to 30 MHz,
(Note 10)
72
dB
DtHD
Propagation Delay
25
ns
DGDHD
Group Delay Variation from 100 kHz to
30 MHz
10
ns
9. Guaranteed by characterization.
10. SNR = 20 x log (714 mV / RMS noise)
TIMING CHARACTERISTICS (VCC = +5 V, Vin = 1 VPP, Rsource = 75 W, TA = 25°C, inputs AC−coupled with 0.1 mF, all outputs
AC−coupled with 220 mF into 150 W referenced to 400 kHz; unless otherwise specified)
Symbol
Characteristics
Ton
Turn ON Time (Note 11)
Toff
Turn OFF Time
Conditions
When 0 V Detected on Inputs
11. Guaranteed by characterization.
http://onsemi.com
8
Min
Typ
Max
Unit
2
10
ms
200
400
ms
NCS2584
TYPICAL CHARACTERISTICS
30
30
20
20
10
10
NORMALIZED GAIN (dB)
NORMALIZED GAIN (dB)
VCC = +3.3 V, Vin = 1 VPP, Rsource = 75 W, TA = 25°C, Inputs AC−coupled with 0.1 mF, All Outputs AC−coupled with 220 mF into 150 W
Referenced to 400 kHz; unless otherwise specified
0
−10
−20
−30
−40
−50
−1 dB @ 7.2 MHz
−3 dB @ 8.5 MHz
−47 dB @ 27 MHz
−20
−30
−40
−50
−60
−60
−70
100k
1M
10M
−1 dB @ 29 MHz
−3 dB @ 33 MHz
−16 dB @ 44.25 MHz
−38 dB @ 74.25 MHz
−70
100k
100M
1M
10M
100M
FREQUENCY (Hz)
FREQUENCY (Hz)
Figure 4. SD Normalized Frequency Response
Figure 5. HD Normalized Frequency Response
0
60
−10
GROUP DELAY (ns)
50
−20
GAIN (dB)
0
−10
−30
−40
−34.6 dB @ 23 MHz
−55 dB @ 50 kHz
−50
30
20
10
−60
−70
1.E+04
10 ns @ 24 MHz
40
1.E+05
1.E+06
1.E+07
0
1.E+05
1.E+08
FREQUENCY (Hz)
1.E+06
1.E+07
FREQUENCY (Hz)
1.E+08
Figure 7. HD Normalized Group Delay
Figure 6. Channel−to−Channel Crosstalk
http://onsemi.com
9
NCS2584
TYPICAL CHARACTERISTICS
VCC = +3.3 V, Vin = 1 VPP, Rsource = 75 W, TA = 25°C, Inputs AC−coupled with 0.1 mF, All Outputs AC−coupled with 220 mF into 150 W
Referenced to 400 kHz; unless otherwise specified
Output
0.7 VPP
Input
25 ns
70 ns
Output
0.7 VPP
Input
Figure 8. SD Propagation Delay
Input
Figure 9. HD Propagation Delay
Input
Output
Output
200 mV
200 mV
Figure 10. SD Small Signal Response
Input
Figure 11. HD Small Signal Response
Output
Output
Input
1 VPP
1 VPP
Figure 12. SD Large Signal Response
Figure 13. HD Large Signal Response
http://onsemi.com
10
NCS2584
TYPICAL CHARACTERISTICS
0
NORMALIZED GAIN (dB)
−20
−30
−40
−50
−60
1.E+04
1.E+05
1.E+06
FREQUENCY (Hz)
1.E+07
60
10
50
0
40
−10
30
−20
20
−30
10
−40
0
−50
−10
−60
−20
−70
−30
−80
400k
1.E+08
−40
50M
10M
(Hz)
Figure 14. SD Frequency Response and Group
Delay
Figure 16. SD and HD VCC PSRR vs.
Frequency
NORMALIZED GAIN (dB)
1M
20
35
10
30
0
25
−10
20
−20
15
−30
10
−40
5
−50
0
−60
−5
−70
−10
−80
400k
−15
1M
(Hz)
10M
NORMALIZED GROUP DELAY (ns)
PSRR (dB)
−10
20
100M
Figure 15. HD Frequency Response and
Group Delay
0.9
0.8
0.2
DIFFERENTIAL PHASE (°)
DIFFERENTIAL GAIN (%)
0.25
0.15
0.1
0.05
0
0.6
0.5
0.4
0.3
0.2
0.1
0
−0.05
1st
0.7
2nd
3rd
4th
5th
0
6th
0
1st
2nd
3rd
4th
5th
HARMONIC
HARMONIC
Figure 17. SD Differential Gain
Figure 18. SD Differential Phase
http://onsemi.com
11
6th
NORMALIZED GROUP DELAY (ns)
VCC = +3.3 V, Vin = 1 VPP, Rsource = 75 W, TA = 25°C, Inputs AC−coupled with 0.1 mF, All Outputs AC−coupled with 220 mF into 150 W
Referenced to 400 kHz; unless otherwise specified
NCS2584
APPLICATIONS INFORMATION
implemented with stand alone op amps. An internal level
The NCS2584 quad video driver has been optimized for
shifter is employed shifting up the output voltage by adding
Standard and High Definition video applications covering
an offset of 280 mV on the outputs. This prevents sync pulse
the requirements of the standards Composite video (Cvbs),
Component Video (720p/1080i). The three HD channels
clipping and allows DC−coupled output to the 150 W video
have 34 MHz filters to cover high definition−like video
load. In addition, the NCS2584 integrates a 6th order
applications. A fourth channel implements one standard
Butterworth filter for each. This allows rejection of the
definition filter of 8 MHz bandwidth to drive the Cvbs
aliases or unwanted over-sampling effects produced by the
signal.
video DAC. Similarly for the case of DVD recorders which
In the regular mode of operation, each channel provides
use a ADC, this anti−aliasing filter (reconstruction filter)
an internal voltage−to−voltage gain of 2 from input to
will avoid picture quality issue and will help filtration of
output. This effectively reduces the number of external
parasitic signals caused by EMI interference.
components required as compared to discrete approach
VCC
10 mF
0.1 mF
10 VCC
GND
5
Video Processor
0.1 mF
Cvbs
1 Cvbs IN
Rs
0.1 mF
Y/G
0.1 mF
Pb / B
0.1 mF
Pr / R
Rs
75 W
220 mF
75 W
220 mF
75 W
220 mF
HD OUT2 12
3 HD IN2
Rs
220 mF
HD OUT1 13
2 HD IN1
Rs
75 W
Cvbs OUT 14
HD OUT3 11
4 HD IN3
TV
75 W
75 W
75 W
75 W
Figure 19. AC−Coupled Configuration at the Input and Output
coupling configuration ensures the maximum compatibility
with all sorts of displays.
A built−in diode−like clamp is used into the chip for each
channel to support the AC−coupled mode of operation. The
clamp is active when the input signal goes below 0 V.
The built−in clamp and level shifter allow the device to
operate in different configuration modes depending on the
DAC output signal level and the input common mode
voltage of the video driver. When the configuration is
DC−Coupled at the Inputs and Outputs, the 0.1 mF and
220 mF coupling capacitors are no longer used, and the
clamps are in that case inactive; this configuration provides
a low cost solution which can be implemented with few
external components (Figure 19). It also require the user the
ensure the input voltage range stays within 0 V to 1.4 V.
The input is AC−coupled when either the input−signal
amplitude goes over the range 0 V to 1.4 V. Activating the
clamp becomes mandatory and the use of the 0.1 mF is
necessary.
The output AC−coupling configuration is advantageous
for eliminating DC ground loop with the drawback of
making the device more sensitive to video line or field tilt
issues. In some cases, it may be necessary to increase the
nominal 220 mF capacitor value. Meanwhile the AC
Shutdown Mode
The NCS2584 integrates a shutdown mode function
which allows the device to detect when the video DAC turns
on or off. When the video DACs turn ON, the video drivers
will turn ON on as soon as they detect a stimulus. Meanwhile
if any glitch happens on the input line, embedded filters will
ignore them to prevent undesired behavior. In this case, the
turn on time is typically around 2 ms to avoid any missing
information. When the chipset turns on, it has to go through
a boot sequence which is significantly longer than this turn
on time. Then, the video drivers will go to a shutdown mode
in order to significantly lower the power consumption only
when no more stimulus is detected from the video DACs. In
addition, the NCS2584 integrates also a load detection
function. It only occurs on the Cvbs which is an independent
signal and the fist HD channel which contains the
synchronization information. It identify when the user plugs
the analog video lines of the TV or not. If these are not
plugged, then the device goes into a standby mode to reduce
the power consumption of the system. The device is in fact
http://onsemi.com
12
NCS2584
The problems of field tilt effects on the video signal are
also eliminated providing the best video quality with
optimal dynamic or peak−to−peak amplitude of the video
signal allowing operating thanks to the built−in level shifter
without risk of signal clipping. In this coupling
configuration the average output voltage is higher than 0 V
and the power consumption can be a little higher than with
an AC−coupled configuration.
capable of recognizing the load of the TV. With the
ENERGY STAR® requirements, these innovative and
patented features will perfectly fit with the power saving
specifications.
DC−Coupled Output
The outputs of the NCS2584 can be DC−coupled to a
150 W load (Figure 20). This has the advantage of
eliminating the AC−coupling capacitors at the output by
reducing the number of external components and saving
space on the board. This can be a key advantage for some
applications with limited space.
VCC
10 mF
0.1 mF
10 VCC
GND
5
Video Processor
0.1 mF
Cvbs
Rs
Cvbs OUT 14
2 HD IN1
HD OUT1 13
0.1 mF
Y/G
Rs
75 W
75 W
HD OUT2 12
3 HD IN2
Rs
0.1 mF
Pr / R
75 W
75 W
0.1 mF
Pb / B
TV
75 W
1 Cvbs IN
HD OUT3 11
4 HD IN3
Rs
75 W
75 W
75 W
Figure 20. AC−Coupled Input and DC−Coupled Output Configuration
VCC
10 mF
0.1 mF
Video Processor
10 VCC
Cvbs
Y/G
Pb / B
Pr / R
Rs
Rs
Rs
Rs
GND
5
75 W
1 Cvbs IN
Cvbs OUT 14
2 HD IN1
HD OUT1 13
220 mF
75 W
220 mF
75 W
220 mF
75 W
220 mF
HD OUT2 12
3 HD IN2
HD OUT3 11
4 HD IN3
Figure 21. DC−Coupled Inputs and AC−Coupled Outputs
http://onsemi.com
13
TV
75 W
75 W
75 W
75 W
NCS2584
VCC
10 mF
0.1 mF
Video Processor
10 VCC
Cvbs
TV
75 W
1 Cvbs IN
Rs
5
GND
Cvbs OUT 14
75 W
75 W
Y/G
HD OUT1 13
2 HD IN1
Rs
75 W
75 W
Pb / B
Pr / R
HD OUT2 12
3 HD IN2
Rs
HD OUT3 11
4 HD IN3
Rs
75 W
75 W
75 W
Figure 22. DC−Coupled Inputs and Outputs
VCC
10 mF
0.1 mF
10 VCC
GND
5
Video Processor
0.1 mF
Cvbs
1 Cvbs IN
Rs
0.1 mF
Pb / B
HD OUT2 12
3 HD IN2
Rs
0.1 mF
Pr / R
Rs
75 W
220 mF
75 W
220 mF
HD OUT1 13
2 HD IN1
Rs
220 mF
Cvbs OUT 14
0.1 mF
Y/G
75 W
75 W
75 W
75 W
75 W
220 mF
220 mF
HD OUT3 11
4 HD IN3
TV
75 W
75 W
75 W
75 W
75 W
75 W
220 mF
220 mF
220 mF
75 W
75 W
75 W
Figure 23. NCS2584 Driving 2 Loads in Parallel for SCART Applications
http://onsemi.com
14
NCS2584
Video Driving Capability
ESD Protection
With an output current capability of 40 mA the NCS2584
was designed to be able to drive at least two video display
loads in parallel. This type of application is illustrated in
Figure 23. Figure 24 (multiburst) and Figure 25 (linearity)
show that the video signal can efficiently drive a 75 W
equivalent load and not degrade the video performance.
All the device pins are protected against electrostatic
discharge at a level of 6 kV following HBM JEDEC
standards. This feature has been considered with a particular
attention with ESD structure able to sustain the typical
values requested by the systems like Set Top Boxes or
Blue−Ray players. This parameter is particularly important
for video driver which usually constitutes the last stage in the
video chain before the video output connector.
Figure 24. Multiburst Test with Two 150 Loads
Figure 25. Linearity Test with Two 150 Loads
ORDERING INFORMATION
Device
NCS2584DTBR2G
Package
Shipping†
TSSOP−14
(Pb−Free)
2500 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
15
NCS2584
PACKAGE DIMENSIONS
TSSOP−14
CASE 948G
ISSUE B
14X K REF
0.10 (0.004)
0.15 (0.006) T U
M
T U
V
S
S
S
N
2X
14
L/2
0.25 (0.010)
8
M
B
−U−
L
PIN 1
IDENT.
N
F
7
1
0.15 (0.006) T U
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION A DOES NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR GATE BURRS.
MOLD FLASH OR GATE BURRS SHALL NOT
EXCEED 0.15 (0.006) PER SIDE.
4. DIMENSION B DOES NOT INCLUDE
INTERLEAD FLASH OR PROTRUSION.
INTERLEAD FLASH OR PROTRUSION SHALL
NOT EXCEED 0.25 (0.010) PER SIDE.
5. DIMENSION K DOES NOT INCLUDE DAMBAR
PROTRUSION. ALLOWABLE DAMBAR
PROTRUSION SHALL BE 0.08 (0.003) TOTAL
IN EXCESS OF THE K DIMENSION AT
MAXIMUM MATERIAL CONDITION.
6. TERMINAL NUMBERS ARE SHOWN FOR
REFERENCE ONLY.
7. DIMENSION A AND B ARE TO BE
DETERMINED AT DATUM PLANE −W−.
S
DETAIL E
K
A
−V−
ÉÉÉ
ÇÇÇ
ÇÇÇ
ÉÉÉ
ÇÇÇ
K1
J J1
DIM
A
B
C
D
F
G
H
J
J1
K
K1
L
M
SECTION N−N
−W−
C
0.10 (0.004)
−T− SEATING
PLANE
D
H
G
DETAIL E
SOLDERING FOOTPRINT*
7.06
1
0.65
PITCH
14X
0.36
14X
1.26
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
16
MILLIMETERS
MIN
MAX
4.90
5.10
4.30
4.50
−−−
1.20
0.05
0.15
0.50
0.75
0.65 BSC
0.50
0.60
0.09
0.20
0.09
0.16
0.19
0.30
0.19
0.25
6.40 BSC
0_
8_
INCHES
MIN MAX
0.193 0.200
0.169 0.177
−−− 0.047
0.002 0.006
0.020 0.030
0.026 BSC
0.020 0.024
0.004 0.008
0.004 0.006
0.007 0.012
0.007 0.010
0.252 BSC
0_
8_
NCS2584
Blu−ray and Blu−ray Disc are trademarks of Blu−ray Disc Association.
ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
17
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
NCS2584/D