PJGL05 SERIES ULTRA LOW CAPACITANCE SINGLE TVS FOR HIGH SPEED DATA LINES This Transient Voltage Suppressor is inteded to Protect Sensitive Equipment against Electrostatic Discharge and Transient Events as well to offer a Miminum insertion loss in high speed data communication transmission line ports used in Portable Consumer,Computing and Networking Applications. VOLTAGE 5~24 Volts POWER 400Watts FEATURES • Working Peak Reverse Voltage Range-5,12,15 and 24V • Maximum Leakage Current of 5µA • IEC61000-4-2 Compliance 15kV Air,8kV Contact Discharge • IEC61000-4-5 17 Amps peak, 8x20µsec Waveform • In compliance with EU RoHS 2002/95/EC directives MECHANICAL DATA • Case: SOT23, Plastic • Terminals: Solderable per MIL-STD-750, Method 2026 • Weight: approximately 0.008gram APPLICATIONS • Mobile Phones and accessories • Universal Serial Bus (USB1.1 and 2.0) Applications • Portable Consumer Electronics • Instrumentation Equipment • Ethernet 10,100 and 1000 Base Port Protection MAXIMUM RATINGS Rating Symbol Value Units Peak Pulse Power (8x20 µs Waveform) PPP 400 W Peak Pulse Current (8x20 µs Waveform) I PP 17 A VESD >25 kV Lead Solding Temperature (max 10 secs) TL 260 O O p e r a t i n g Te m p e r a t u r e R a n g e TJ -55 to +125 O T S TG -55 to +150 O ESD Voltage (HBM) S t o r a g e Te m p e r a t u r e R a n g e C C C Fig.59 REV.0.1-FEB.20.2009 PAGE . 1 PJGL05 SERIES ELECTRICAL CHARACTERISTICS (TJ=25oC) PJGL05 Marking GL5 Parameter Reverse Stand-Off Voltage Reverse Breakdown Voltage Symbol Conditions Min. Typ. Max. Unit - - 5 V I BR=1mA 6 - - V VR=5V - - 20 µA VWRM VBR Reverse Leakage Current IR Clamping Voltage (8/20µs) VCL I PP=1Amps - - 9.5 V Clamping Voltage (8/20µs) VCL I PP=5Amps - - 11 V Off State Junction Capacitance CJ 0Vdc Bias f = 1MHz Between pins 1 and 2 - - 1.2 pF Min. Typ. Max. Unit - - 12 V PJGL12 Marking G12 Parameter Reverse Stand-Off Voltage Reverse Breakdown Voltage Symbol Conditions VWRM VBR I BR=1mA 13.3 - - V Reverse Leakage Current IR VR=12V - - 1 µA Clamping Voltage (8/20µs) VCL I PP=1Amps - - 19 V Clamping Voltage (8/20µs) VCL I pp=5Amps - - 24 V Off State Junction Capacitance CJ 0Vdc Bias f = 1MHz Between pins 1 and 2 - - 1.2 pF Min. Typ. Max. Unit - - 15 V PJGL15 Marking G15 Parameter Reverse Stand-Off Voltage Reverse Breakdown Voltage Symbol Conditions VWRM VBR I BR=1mA 16.7 - - V Reverse Leakage Current IR VR=15V - - 1 µA Clamping Voltage (8/20µs) VCL I PP=1Amps - - 24 V Clamping Voltage (8/20µs) VCL I pp=5Amps - - 30 V Off State Junction Capacitance CJ 0Vdc Bias f = 1MHz Between pins 1 and 2 - - 1.2 pF REV.0.1-FEB.20.2009 PAGE . 2 PJGL05 SERIES PJGL24 Marking G24 Parameter Symbol Reverse Stand-Off Voltage Conditions Min. Typ. Max. Unit - - 24 V VWRM Reverse Breakdown Voltage VBR I BR=1mA 26.7 - - V Reverse Leakage Current IR VR=24V - - 1 µA Clamping Voltage (8/20µs) VCL I PP=1Amps - - 43 V Clamping Voltage (8/20µs) VCL I PP=5Amps - - 55 V Off State Junction Capacitance CJ 0Vdc Bias f = 1MHz Between pins 1 and 2 - - 1.2 pF TYPICAL CHARACTERISTIC CURVES Pulse Waveform Clamping Voltage vs Ipp 8x20µsec 110 18 16 100 90 PJGL05 50% of Ipp @ 20µs 80 Percent of Ipp Ipp, Amps 14 12 10 8 6 4 70 60 50 40 30 Rise time 10-90% - 8µs 20 10 2 0 0 6 8 10 12 14 16 18 20 22 24 0 5 10 Clamping Voltage, V 15 time, µsec 20 25 30 125 150 Pow er Derating Curve Non-Re petitive Pe a k Pulse Pow e r vs Pulse Time 110 10 % of Rated Power or Ipp Peak Pulse Power - Ppp (kW) 100 1 0.1 90 80 70 60 50 40 30 20 10 0 0.01 0.1 1 10 Pulse Dura tion, µse c REV.0.1-FEB.20.2009 100 1000 0 25 50 75 100 Ambient Temperature - TA, °C PAGE . 3 PJGL05 SERIES MOUNTING PAD LAYOUT ORDER INFORMATION • Packing information T/R - 12K per 13" plastic Reel T/R - 3K per 7” plastic Reel LEGAL STATEMENT Copyright PanJit International, Inc 2009 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. REV.0.1-FEB.20.2009 PAGE . 4