PJLCDA05 SERIES ULTRA LOW CAPACITANCE QUAD TVS ARRAY FOR HIGH SPEED TRANSMISSION DATA LINES This Transient Voltage Suppressor Array is intended to Protect Sensitive Equipment against Electrostatic Discharge and Transient Events as well to offer a miminum insertion loss in high speed data communication transmission line ports used in Portable Consumer, Computing and Networking Applications. SPECIFICATION FEATURES Working Peak Reverse Voltage Range of 5, 12, 15 and 24V Maximum Leakage Current of 5µA IEC61000-4-2 Compliance 15kV Air, 8kV Contact Discharge Maximum Off-State Capacitance of 1.2pF at 1MHz 0Vdc 1 8 2 7 3 6 4 5 SOIC-8 5 APPLICATIONS 6 Handheld Computers (PDA) 7 4 8 Universal Serial Bus (1.1 and 2.0) and Fire Wire Ports 3 Portable Instrumentation Laptop or Desktop Computer Network cards 2 1 Ethernet 10, 100, and 1000 Base Port Protection MAXIMUM RATINGS Symbol Value Units Ppp 400 W V ESD 25 kV Operating Temperature Range TJ -55 to +125 °C Storage Temperature Range Tstg -55 to +150 °C Lead Soldering Temperature (max 10 s) TL 260 °C Rating Peak Pulse Power 8/20µs Waveform ESD Voltage (HBM) ELECTRICAL CHARACTERISTICS (Per Device Pair) Tj = 25°C PJLCDA05 Parameter Reverse Stand-Off Voltage Min VWRM Reverse Breakdown Voltage VBR Reverse Leakage Current IR Clamping Voltage (8/20µs) Vc Clamping Voltage (820µs) Vc Maximum Peak Pulse Current I pp Off State Junction Capacitance Cj 4/4/2006 Conditions Symbol I BR = 1mA Max Units 5 V 6 V 5 µA I pp = 1 Amps 9.5 V I pp = 5 Amps 12 V 17 A 1.2 pF VR = 5V 8/20 µs Waveform 0 Vdc Bias f = 1MHz Between pins 1-8, 2-7,3-6 and 4-5 Page Typical 1 www.panjit.com PJLCDA05 SERIES ELECTRICAL CHARACTERISTICS (Per Device Pair) Tj = 25°C PJLCDA12 Parameter Reverse Stand-Off Voltage Symbol Conditions Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 12V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Max Units 12 V 13.3 V 1 µA I pp = 1A 19 V Vc I pp = 5A 24 V Maximum Peak Pulse Current I pp 8/20 µs Waveform 12 A Off State Junction Capacitance Cj 0 Vdc Bias f = 1MHz Between pins 1-8, 2-7,3-6 and 4-5 1.2 pF Symbol Conditions Max Units 15 V PJLCDA15 Parameter Reverse Stand-Off Voltage Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1 mA Reverse Leakage Current IR VR = 15V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) 16.7 V 1 µA I pp = 1A 24 V Vc I pp = 5A 30 V Maximum Peak Pulse Current I pp 8/20 µs Waveform 10 A Off State Junction Capacitance Cj 0 Vdc Bias f = 1MHz Between pins 1-8, 2-7,3-6 and 4-5 1.2 pF Symbol Conditions Max Units 24 V PJLCDA24 Parameter Reverse Stand-Off Voltage Min VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 24V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Typical 26.7 V 1 µA I pp = 1A 43 V Vc I pp = 5A 55 V Maximum Peak Pulse Current I pp 8/20 µs Waveform 7 A Off State Junction Capacitance Cj 1.2 pF 4/4/2006 0 Vdc Bias f = 1MHz Between pins 1-8, 2-7,3-6 and 4-5 Page 2 www.panjit.com PJLCDA05 SERIES TYPICAL CHARACTERISTIC CURVES Pulse Waveform 110 100 90 100 90 80 80 Percent of Ipp % of Rated Power or Ipp Pow er Derating Curve 110 70 60 50 40 60 50 40 30 30 20 20 10 10 50% of Ipp @ 20µs 70 Rise time 10-90% - 8µs 0 0 0 25 50 75 100 125 150 0 5 Ambient Temperature - TA, °C 10 15 time, µsec 20 25 30 Non-Re petitive Pe a k Pulse Pow e r vs Pulse Time Peak Pulse Power - Ppp (kW) 10 1 0.1 0.01 0.1 1 10 100 1000 Pulse Dura tion, µse c TYPICAL APPLICATION CONFIGURATIONS +Vbus Ethernet port protection Ethernet Application USB Application I/O Data lines Bi-directional mode D+ T R DT Gnd R PJLCDA05 4/4/2006 PJLCDA05 Page 3 www.panjit.com PJLCDA05 SERIES PACKAGE DIMENSIONS AND PAD LAYOUT PRODUCT MARKING INFORMATION TVS Marking Code PJLCDA05 L05 PJLCDA12 L12 PJLCDA15 L15 PJLCDA24 L24 © Copyright PanJit International, Inc 2006 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 4/4/2006 Page 4 www.panjit.com