PJSMDA05C-7 SERIES BI-DIRECTIONAL 7-TVS ARRAY This 7 TVS/Zener Array family have been designed to Protect Sensitive Equipment against ESD and to prevent Latch-Up events in CMOS circuitry operating at 5V, 12V, 15V and 24V. This TVS array offers an integrated solution to protect up to 7 data lines where the board space is a premium. 8 7 6 5 1 2 3 4 SPECIFICATION FEATURES 350W Power Dissipation (8x20µsec Waveform) Low Leakage Current, Maximum of 5µA at rated voltage Very Low Clamping Voltage IEC61000-4-2 ESD 20kV air, 15kV Contact Compliance Packaged in the Industry Standard SOIC-8 100% Tin Matte Finish (RoHS Compliant) 5 APPLICATIONS 4 8 RS-232C or RS-422 Communication ports GPIB/IEEE 485 Ports 1 Portable Instrumentation Video Signal Ports SOIC-8 MAXIMUM RATINGS (Per Device) Symbol Value Units Peak Pulse Power (8/20µs Waveform) P pp 350 W ESD Voltage (HBM) V ESD >25 kV Operating Temperature Range TJ -50 to +125 °C Storage Temperature Range Tstg -50 to +150 °C Typical Max Units 5 V Rating ELECTRICAL CHARACTERISTICS Tj = 25°C PJSMDA05C-7 Parameter Reverse Stand-Off Voltage Conditions Symbol Min VWRM Reverse Breakdown Voltage VBR Reverse Leakage Current IR VR = 5V 5 µA Clamping Voltage (8/20µs) Vc I pp = 5A 9.5 V Clamping Voltage (8/20µs) Vc I pp = 24A 13 V Off State Junction Capacitance Cj 0 Vdc Bias f = 1MHz Between I/O pins 100 pF Off State Junction Capacitance Cj 5 Vdc Bias f = 1MHz Between I/O pins 60 pF 4/3/2006 I BR = 1mA Page 1 6 V www.panjit.com PJSMDA05C-7 SERIES ELECTRICAL CHARACTERISTICS Tj = 25°C PJSMDA12C-7 Parameter Reverse Stand-Off Voltage Symbol Conditions Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 12V Clamping Voltage (8x20µs) Vc Clamping Voltage (8x20µs) Off State Junction Capacitance Max Units 12 V 13.3 V 5 µA I pp = 5A 17 V Vc I pp = 15A 21 V Cj 0 Vdc Bias f = 1MHz Between I/O pins 50 pF Max Units 15 V PJSMDA15C-7 Parameter Reverse Stand-Off Voltage Symbol Conditions Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 15V Clamping Voltage (8x20µs) Vc Clamping Voltage (8x20µs) Off State Junction Capacitance 16.7 V 5 µA I pp = 5A 22 V Vc I pp = 12A 27 V Cj 0 Vdc Bias f = 1MHz Between I/O pins 40 pF Max Units 24 V PJSMDA24C-7 Parameter Reverse Stand-Off Voltage Symbol Conditions VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 24V Clamping Voltage (8x20µs) Vc Clamping Voltage (8x20µs) Vc Off State Junction Capacitance 4/3/2006 Min Cj Typical 26.7 V 5 µA I pp = 5A 35 V I pp = 8A 40 V 30 pF 0 Vdc Bias f = 1MHz Between I/O pins Page 2 www.panjit.com PJSMDA05C-7 SERIES TYPICAL CHARACTERISTICS TJ = 25°C unless otherwise noted Surge Pulse Waveform Definition Non-Repetitive Peak Pulse Power vs Pulse Time 110 100 90 80 70 60 50 40 30 20 10 0 1000 50% of Ipp @ 20µs Rise time 10-90% - 8µs 0 5 10 15 20 25 30 Peak Pulse Power - Ppp (W) Percent of Ipp Pulse Waveform 100 10 1 0.1 0.01 1 10 100 1000 tim e, µsec Pulse Duration, µsec Off-State Capacitance per Device*- 1MHz Clamping Voltage vs. Peak current 45 40 35 30 25 20 15 10 5 0 PJSMDAxxC-7 Per Device PJS24 MS24 Capacitance, pF Clamping voltage, V PJSMDAxxC-7 PJSMS 1515 PJSMS 1212 PJS05 MS05 0 5 10 15 20 25 30 Ipp, A (8/20µsec) 200 180 160 140 120 100 80 60 40 20 0 05 PJSMS05 12 PJSMS12 0 1 15 5 PJSMS1 2 24 PJSMS24 3 4 Bias, Vdc * Note: Capacitance between I/O Lines is half of the value shown here. 4/3/2006 Page 3 www.panjit.com 5 PJSMDA05C-7 SERIES TYPICAL APPLICATION EXAMPLE AND PACKAGE DIMENSIONS 4/3/2006 4 2 1 3 7 8 6 5 I/O Line1 I/O Line2 I/O Line3 I/O Line4 I/O Line5 I/O Line6 I/O Line7 Ground Page 4 www.panjit.com PJSMDA05C-7 SERIES DEVICE MARKING INFORMATION TVS Marking Code PJSMDA05C-7 B05 PJSMDA12C-7 B12 PJSMDA15C-7 B15 PJSMDA24C-7 B24 © Copyright PanJit International, Inc 2006 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 4/4/2006 Page 5 www.panjit.com