Low Cost SMT Dual Band Diplexer DP52-0004 DP52-0004 Low Cost SMT Dual Band Diplexer 400-700/1100-1940 MHz Features • • • • • • • SOW-16 Small Size and Low Profile Industry Standard SOW-16 SMT Plastic Package Superior Repeatability Passbands 400-700 MHz and 1100-1940 MHz Typical Passband Insertion Loss: 0.5 dB 2 Watt Power Handling Low Cost Description M/A-COM’s DP52-0004 is an IC-based monolithic Diplexer in a low cost SOW-16 plastic package. This Diplexer is ideally suited for applications where small size, low insertion loss, superior repeatability and low cost are required. Typical applications include WMT/PCS and dual mode portable devices. The DP52-0004 is fabricated using a passive-integrated circuit process. The process features full-chip passivation for increased performance and reliability. Ordering Information Part Number Package DP52-0004 S0W-16 Lead Plastic Package Forward Tape and Reel1 DP52-0004-TR 1. If specific reel size is required, consult factory for part number assignment. 400MHz/1100-1940MHz Typical Electrical Specifications1, TA = +25°C Units Min Typ Max Passband Insertion Loss Parameter dB — 1.8 2.8 Stopband Isolation dB 21 30 — Passband VSWR — — 1.88 2.06 1. All specifications apply with a 50-Ohm source and load impedance. V1.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. Low Cost SMT Dual Band Diplexer DP52-0004 Absolute Maximum Ratings1 Parameter Recommended PCB Configuration Absolute Maximum Input Power 2 W CW Operating Temperature -40°C to +85°C Storage Temperature -65°C to +150°C 1. Exceeding these limits may cause permanent damage. Functional Diagram Typical Performance @ +25°C VSWR vs Frequency Insertion Loss vs Frequency VSW R vs. Frequency 3 Insertion Loss and Rejection vs. Frequency 2.75 2.5 -10 2.25 -20 VSWR Insertion loss and Rejection (dB) 0 -30 2 1.75 -40 1.5 -50 1.25 -60 200 680 1160 1640 2120 Frequency (MHz) 1 200 680 1160 F re q u e n cy (M Hz ) 1640 2600 V1.00 M/A-COM Division of AMP Incorporated ■ North America: Tel. (800) 366-2266, Fax (800) 618-8883 ■ Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 ■ Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.