STMICROELECTRONICS STPS15H100C-Y

STPS15H100C-Y
Automotive high voltage power Schottky rectifier
Features
■
Negligible switching losses
■
Low leakage current
■
Good trade off between leakage current and
forward voltage drop
■
Low thermal resistance
■
Avalanche capability specified
■
AEC-Q101 qualified
Description
STPS15H100CBY-TR
DPAK
Dual center tab Schottky rectifier suited for
switched mode power supply and high frequency
DC to DC converters.
Table 1.
Packaged in DPAK, this device is intended for use
in high frequency inverters in automotive market.
November 2011
Doc ID 17686 Rev 1
Device summary
Symbol
Value
IF(AV)
2 x 7.5 A
VRRM
100 V
Tj (max)
175 °C
VF(max)
0.67 V
1/7
www.st.com
7
Characteristics
1
STPS15H100C-Y
Characteristics
Table 2.
Absolute Ratings (limiting values, per diode)
Symbol
VRRM
Repetitive peak reverse voltage
IF(RMS)
Forward rms current
tp = 10 ms sinusoidal
IRRM
Peak repetitive reverse current
tp = 2 µs square F= 1 kHz
PARM
Repetitive peak avalanche power
tp = 1 µs Tj = 25 °C
dV/dt
V
10
A
15
Surge non repetitive forward current
Per device
A
75
Storage temperature range
Operating junction temperature
100
δ = 0.5
IFSM
Tj
Unit
7.5
Average forward current
(1)
Value
Tc = 135 °C Per diode
IF(AV)
Tstg
1.
Parameter
range
A
1
A
6600
W
- 65 to + 175
°C
-40 to +175
°C
10000
V/µs
Value
Unit
Critical rate of rise of reverse voltage
1
dPtot <
condition to avoid thermal runaway for a diode on its own heatsink
Rth(j-a)
dTj
Table 3.
Thermal resistance
Symbol
Parameter
Per diode
Rth(j-c)
Junction to case
Rth(c)
Coupling
4
Total
2.4
°C/W
0.7
When the diodes 1 and 2 are used simultaneously :
Δ Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode 2) x Rth(c)
Table 4.
Symbol
IR(1)
VF((1))
Static electrical characteristics (per diode)
Parameter
Reverse leakage
current
Forward voltage drop
Test conditions
Tj = 25 °C
Tj = 125 °C
Min.
VR = VRRM
Tj = 25 °C
IF = 7.5 A
Tj = 125 °C
IF = 7.5 A
Tj = 25 °C
IF = 12 A
Tj = 125 °C
IF = 12 A
Tj = 25 °C
IF = 15 A
Tj = 125 °C
IF = 15 A
1. Pulse test: tp = 380 µs, δ < 2%
To evaluate the conduction losses use the following equation:
P = 0.58 x IF(AV) + 0.012 IF2(RMS)
2/7
Doc ID 17686 Rev 1
Typ.
1.3
Max.
Unit
3
µA
4
mA
0.8
0.62
0.67
0.85
V
0.68
0.73
0.89
0.71
0.76
STPS15H100C-Y
Characteristics
Figure 1.
Conduction losses versus average Figure 2.
current
Average forward current versus
ambient temperature (δ = 0.5)
Figure 3.
Normalized avalanche power
derating versus pulse duration
Normalized avalanche power
derating versus junction
temperature
1
Figure 4.
PARM(tp)
PARM(1µs)
1.2
PARM(Tj)
PARM(25 °C)
1
0.1
0.8
0.6
0.4
0.01
0.2
0.001
0.01
Figure 5.
tp(µs)
0.1
1
10
100
1000
Non repetitive surge peak forward
current versus overload duration
(maximum values)
0
25
Figure 6.
Doc ID 17686 Rev 1
Tj(°C)
50
75
100
125
150
Relative variation of thermal
impedance junction to case versus
pulse duration
3/7
Characteristics
STPS15H100C-Y
Figure 7.
Reverse leakage current versus
reverse voltage applied
(typical values)
Figure 8.
Junction capacitance versus
reverse voltage applied
(typical values)
Figure 9.
Forward voltage drop versus
forward current
Figure 10. Thermal resistance junction to
ambient versus copper surface
under tab
Rth(j-a)(°C/W)
100
epoxy printed board FR4, Cu: 35µm
90
80
70
60
50
40
30
20
S(cm²)
10
0
0
4/7
Doc ID 17686 Rev 1
2
4
6
8
10
12
14
16
18
20
STPS15H100C-Y
2
Package information
Package information
●
Epoxy meets UL94,V0
●
Lead-free packages
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
Table 5.
DPAK dimensions
Dimensions
Ref.
E
A
B2
C2
Millimeters
Inches
Min.
Max.
Min.
Max.
A
2.20
2.40
0.086
0.094
A1
0.90
1.10
0.035
0.043
A2
0.03
0.23
0.001
0.009
B
0.64
0.90
0.025
0.035
B2
5.20
5.40
0.204
0.212
C
0.45
0.60
0.017
0.023
C2
0.48
0.60
0.018
0.023
D
6.00
6.20
0.236
0.244
E
6.40
6.60
0.251
0.259
G
4.40
4.60
0.173
0.181
H
9.35
10.10
0.368
0.397
L2
D
R
H
L4
A1
B
G
R
C
A2
0.60 MIN.
V2
L2
0.80 typ.
0.031 typ.
L4
0.60
1.00
0.023
0.039
V2
0°
8°
0°
8°
Figure 11. Footprint (dimensions in mm)
6.7
3
3
1.6
2.3
6.7
2.3
1.6
Doc ID 17686 Rev 1
5/7
Ordering information
3
Ordering information
Table 6.
4
Ordering information
Order code
Marking
Package
Weight
Base qty
Delivery mode
STPS15H100CBY-TR
S15H100Y
DPAK
0.30 g
75
Tape and reel
Revision history
Table 7.
6/7
STPS15H100C-Y
Document revision history
Date
Revision
04-Nov-2011
1
Changes
Initial release.
Doc ID 17686 Rev 1
STPS15H100C-Y
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 17686 Rev 1
7/7