REV B REVISED PER ECR-ER12110 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT, FERRULE: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER CY SDPRF-206 . BY APPD DATE DESCRIPTION HUN 11/12/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY, FERRULE: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000050 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) ALL OTHER METAL PARTS: .000050MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) 4. CONTACT AND FERRULE SHIPPED LOOSE 5. FOR USE WITH TACHII CABLE TCX-4CHD OR EQUIVALENT. 6. FOR CRIMPING USE KINGS TOOL KTH-5000 AND DIE KTH-5009( .268 HEX, .054 SQUARE FLAT) MARKING: KINGS+2065+CABLE CODE+ DATE CODE+LACATION CODE 7. ASSEMBLE TO CABLE USING CAP-E01 8. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS. FREQUENCY RANGE: DC-3GHz. RETURN LOSS: 22dB MIN AT DC-3GHz. .2406.10 .305 7.75 .270 6.86 .591 15.00 .173 4.39 1.372[34.85] WHEN ASSEMBLED .74819.00 .3548.99 .138 3.51 CATALOG P/N: 2065-E00-4CH01N PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 RECOMMENDED CABLE TRIM DIMENSIONS Winches terElectronics ® CUSTOMER DRAWING DRAWN KEV APPROVED RL DATE APPROVED 03/05/08 Dcam DATE APPROVED 03/05/08 WPM DATE 03/05/08 DATE 03/05/08 Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 BNC 75 OHM PLUG FOR TACHII TCX-4CHD CABLE (ROHS COMPLIANT) A SD2065-E00-4CH01N SHT 1 OF 1 REV B