B REVISED PER ECR08-ER12110 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT, FERRULE: BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER CY DESCRIPTION HUN 11/12/08 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. BY APPD DATE REV NOTES: UNLESS OTHERWISE SPECIFIED 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY, FERRULE: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000050 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 4. CONTACT AND FERRULE SHIPPED LOOSE. 5. FOR USE WITH TACHII CABLE TCX-5C2V & TCX-5C2VS OR EQUIVALENT. MARKING: KINGS+2065+CABLE CODE+ DATE CODE+LACATION CODE 6. FOR CRIMPING USE KINGS KTH-5000 & KTH-5005 (.301 HEX, .054 SQUARE FLAT). 7. ASSEMBLE TO CABLE USING CAP-E01. .199 5.05 8. ELECTRIC SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 3 GHz RETURN LOSS: 25 dB MIN (DC TO 3 GHz) .274 6.96 .342 8.69 .3107.87 .591 15.01 ( .3548.99 1.372 34.85 ) WHEN ASSEMBLED .1383.51 CATALOG P/N: 2065-E00-5C201N .74819.00 RECOMMENDED CABLE TRIMMING DIMENSIONS PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .0005 ANGLES: ± 2° SCALE: 2:1 Winches terElectronics ® CUSTOMER DRAWING DRAWN CY APPROVED D.CAM DATE APPROVED 03/05/08 R.FAZIO DATE APPROVED 03/05/08 XXX DATE 03/05/08 DATE XX/XX/XX Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 BNC 75 PLUG FOR TACHII TCX-5C2V(S) (ROHS COMPLIANT) A SD2065-E00-5C201N SHT 1 OF 2 REV B