Series AM1S-Z 1 Watt | DC-DC Converter FEATURES: RoHS compliant 4 Pin SIP Package Low ripple and noise High efficiency up to 78% Operating temperature -40oC to + 85oC Input / Output isolation 1000 and 3000VDC Pin compatible with multiple manufacturers Models Single output Model AM1S-0503SZ AM1S-0505SZ AM1S-0507SZ AM1S-0509SZ AM1S-0512SZ AM1S-0515SZ AM1S-0518SZ AM1S-0524SZ AM1S-1203SZ AM1S-1205SZ AM1S-1207SZ AM1S-1209SZ AM1S-1212SZ AM1S-1215SZ AM1S-1218SZ AM1S-1224SZ AM1S-2403SZ AM1S-2405SZ AM1S-2407SZ AM1S-2409SZ AM1S-2412SZ AM1S-2415SZ AM1S-2418SZ AM1S-2424SZ AM1S-0503SH30Z AM1S-0505SH30Z AM1S-0507SH30Z AM1S-0509SH30Z AM1S-0512SH30Z AM1S-0515SH30Z AM1S-0518SH30Z AM1S-0524SH30Z AM1S-1203SH30Z AM1S-1205SH30Z AM1S-1207SH30Z AM1S-1209SH30Z AM1S-1212SH30Z AM1S-1215SH30Z AM1S-1218SH30Z AM1S-1224SH30Z AM1S-2403SH30Z AM1S-2405SH30Z AM1S-2407SH30Z AM1S-2409SH30Z AM1S-2412SH30Z AM1S-2415SH30Z AM1S-2418SH30Z AM1S-2424SH30Z www.aimtec.com F 051e R6.H Input – Voltage (V) Output Voltage (V) Output Current max (mA) Isolation (VDC) Max Capacitive Load (uF) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 300 200 140 110 83 67 56 42 300 200 140 110 83 67 56 42 300 200 140 110 83 67 56 42 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 72 75 76 77 78 78 78 78 72 75 76 77 78 78 78 78 72 75 76 77 78 78 78 78 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 3.3 5 7.2 9 12 15 18 24 300 200 140 110 83 67 56 42 300 200 140 110 83 67 56 42 300 200 140 110 83 67 56 42 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 3000 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 220 72 75 76 77 78 78 78 78 72 75 76 77 78 78 78 78 72 75 76 77 78 78 78 78 Tel: +1 514 620 2722 1 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1S-Z 1 Watt | DC-DC Converter Input Specifications Parameters Nominal Typical 5 12 24 Voltage range Filter Turn on Transient process time Start up time Absolute Maximum Rating Maximum Units 4.5-5.5 10.8-13.2 21.6-26.4 Capacitor VDC 25 ms ms 200 0-7 0-15 0-28 100 5 Vin 12 Vin 24 Vin Peak Input Voltage time VDC ms Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 3 sec Rated Units 1000 and 3000 VDC MOhm pF Maximum Units > 1000 60 Output Specifications Parameters Voltage accuracy Short Circuit protection Line voltage regulation (Single) Load voltage regulation (Single) Load voltage regulation (Single) 3.3V output model Temperature coefficient Ripple & Noise Capacitive load Rising time Conditions Typical ±3 Momentary (1 sec) ±1.2 ±10 For 1% change of Vin Load 20 – 100% % % of Vin % Load 20 – 100% ±20 % At 20MHz Bandwidth ±0.02 100 %/oC mV p-p μF ms 220 50 General Specifications Parameters Switching frequency Operating temperature Storage temperature Max Case temperature Cooling Humidity Case material Weight Dimensions (L x W x H) MTBF Conditions Typical 100% load Full Load without Derating 80 Maximum Units 100 KHz o C o C o C -40 to +85 -55 to +125 Free air convection 95 Non-conductive black plastic UL94-VO 1.8 0.46 x 0.24 x 0.38 inches 11.68 x 6.00 x 9.65 mm >1 191 000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) % g NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Standards Agency approvals Safety www.aimtec.com F 051e R6.H CE EN55022 (Radiated Emissions) class B EN55024 (Noise Immunity), IEC61000-4-2(ESD) IEC61000-4-3(Radiated immunity) Tel: +1 514 620 2722 2 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1S-Z 1 Watt | DC-DC Converter Pin Out Specifications Pin 1 2 3 4 Dimensions Single - V Input +V Input - V Output +V Output 6.00 (0.24) (0.46) PRINTED FACE 10.15 (0.40) 9.65 (0.38) 0.50 (0.02) 3.05 (0.12) 2.54 (0.10) 0.50 (0.02) 1.25 (0.05) 0.30 (0.01) 6.00 (0.24) 0.50 (0.02) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R6.H Tel: +1 514 620 2722 3 of 3 Toll free: + 1 888 9 AIMTEC (924 6832) North America only