Click on Series name for product info on aimtec.com Series AM1P-NZ 1 Watt | DC-DC Converter FEATURES: Operating temperature -40oC to + 85oC Input / Output isolation 1000 VDC Pin computable with multiple manufacturers UL94-VO Package RoHS compliant 8 Pin DIP Package Low ripple and noise High efficiency up to 79% Models Single output Input Voltage (V) Model AM1P-0505S-NZ AM1P-1215S-NZ Output Voltage (V) 4.5-5.5 10.8-13.2 Output Current max (mA) 5 15 Isolation (VDC) Efficiency (%) 1000 1000 78 79 200 67 Input Specifications Parameters Voltage range Nominal Typical 5 12 4.5-5.5 10.8-13.2 Filter Maximum Units VDC Capacitor Isolation Specifications Parameters Tested I/O voltage Resistance Capacitance Conditions Typical 60 sec Rated Units 1000 VDC MOhm pF > 1000 60 Output Specifications Parameters Voltage accuracy Short Circuit protection Line voltage regulation Load voltage regulation Temperature coefficient Ripple & Noise Conditions Typical Maximum Units See tolerance graph Momentary (1 sec) ±1.2 10 ±0.03 75 For 1.0% Vin Load 10 – 100% At 20 MHz Bandwidth % of Vin % %/oC m Vp-p General Specifications Parameters Conditions Typical Maximum Units KHz Switching frequency 100% load 150 oC Operating temperature Without derating -40 to +85 oC Storage temperature -55 to +125 oC Case temperature 90 Cooling Free air convection Humidity 90 % Case material Plastic UL94-VO Weight 1.8 g Dimensions (L x W x H) 0.46 x 0.39x 0.30 inches 11.70 x 9.80 x 7.70 mm MTBF >1 000 000 hrs(MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. Safety Specifications Parameters Agency approvals Standards www.aimtec.com F 051e R11.I CE IEC60950-1 :2001 Tel: +1 514 620 2722 1 of 2 Toll free: + 1 888 9 AIMTEC (924 6832) North America only Series AM1P-NZ 1 Watt | DC-DC Converter Pin Out Specifications Pin 1 4 5 6 7 8 External capacitor Single - V Input +V Input +V Output No pin -V Output No pin Vin (VDC) External capacitor (uF) Vout (VDC) External capacitor (uF) 5 12 24 - 4.7 2.2 1 - 5 9 12 15 10 4.7 2.2 1 Dimensions 11.70 (0.46) Filtering 7.62 (0.30) 0.50 (0.02) 1 7.62 (0.30) 9.80 (0.39) 4 Bottom View 8 7 6 5 2.54 (0.10) 7.70 (0.30) 4.10 (0.16) 0.50 (0.02) 2.54 (0.10) NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3.Mechanical drawings and specifications are for reference only. 4.All specifications are measured at an ambient temperature of 25°C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5.Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec’s standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R11.I Tel: +1 514 620 2722 2 of 2 Toll free: + 1 888 9 AIMTEC (924 6832) North America only