DM5416,DM7416 DM5416 DM7416 Hex Inverting Buffers with High Voltage Open-Collector Outputs Literature Number: SNOS239A DM5416/DM7416 Hex Inverting Buffers with High Voltage Open-Collector Outputs General Description Pull-Up Resistor Equations RMAX e VO (Min) b VOH N1 (IOH) a N2 (IIH) VO (Max) b VOL RMIN e IOL b N3 (IIL) Where: N1 (IOH) e total maximum output high current for all outputs tied to pull-up resistor N2 (IIH) e total maximum input high current for all inputs tied to pull-up resistor N3 (IIL) e total maximum input low current for all inputs tied to pull-up resistor e This device contains six independent gates each of which performs the logic INVERT function. The open-collector outputs require external pull-up resistors for proper logical operation. et Connection Diagram bs ol Dual-In-Line Package TL/F/6504 – 1 O Order Number DM5416J, DM5416W or DM7416N See NS Package Number J14A, N14A or W14B Function Table YeA Input Output A Y L H H L H e High Logic Level L e Low Logic Level C1995 National Semiconductor Corporation TL/F/6504 RRD-B30M105/Printed in U. S. A. DM5416/DM7416 Hex Inverting Buffers with High Voltage Open-Collector Outputs June 1989 Absolute Maximum Ratings (Note) Note: The ‘‘Absolute Maximum Ratings’’ are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the ‘‘Electrical Characteristics’’ table are not guaranteed at the absolute maximum ratings. The ‘‘Recommended Operating Conditions’’ table will define the conditions for actual device operation. If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/Distributors for availability and specifications. Supply Voltage 7V Input Voltage 5.5V Output Voltage 15V Operating Free Air Temperature Range b 55§ C to a 125§ C DM54 DM74 0§ C to a 70§ C b 65§ C to a 150§ C Storage Temperature Range Recommended Operating Conditions DM5416 Parameter DM7416 Units Min Nom Max Min Nom Max 4.5 5 5.5 4.75 5 5.25 VCC Supply Voltage VIH High Level Input Voltage VIL Low Level Input Voltage 0.8 VOH High Level Output Voltage 15 IOL Low Level Output Current 30 TA Free Air Operating Temperature 2 125 V 0.8 0 V 15 V 40 mA 70 §C et b 55 V 2 e Symbol Electrical Characteristics over recommended operating free air temperature range (unless otherwise noted) Symbol Parameter Conditions Typ (Note 1) Min Units VI Input Clamp Voltage b 1.5 V ICEX High Level Output Current VCC e Min, VO e 15V VIL e Max 250 mA VOL Low Level Output Voltage VCC e Min, IOL e Max VIH e Min 0.7 IOL e 16 mA, VCC e Min 0.4 bs ol VCC e Min, II e b12 mA Max V Input Current @ Max Input Voltage VCC e Max, VI e 5.5V IIH High Level Input Current VCC e Max, VI e 2.4V 40 mA IIL Low Level Input Current VCC e Max, VI e 0.4V b 1.6 mA ICCH Supply Current with Outputs High VCC e Max 30 48 mA ICCL Supply Current with Outputs Low VCC e Max 27 51 mA O II 1 mA Switching Characteristics at VCC e 5V and TA e 25§ C (See Section 1 for Test Waveforms and Output Load) Symbol Parameter Conditions tPLH Propagation Delay Time Low to High Level Output CL e 15 pF RL e 110X tPHL Propagation Delay Time High to Low Level Output Note 1: All typicals are at VCC e 5V, TA e 25§ C. 2 Min Max Units 15 ns 23 ns e Physical Dimensions inches (millimeters) O bs ol et 14-Lead Ceramic Dual-In-Line Package (J) Order Number DM5416J NS Package Number J14A 14-Lead Molded Dual-In-Line Package (N) Order Number DM7416N NS Package Number N14A 3 bs ol et e 14-Lead Ceramic Flat Package (W) Order Number DM5416W NS Package Number W14B LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: O DM5416/DM7416 Hex Inverting Buffers with High Voltage Open-Collector Outputs Physical Dimensions inches (millimeters) (Continued) 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation 1111 West Bardin Road Arlington, TX 76017 Tel: 1(800) 272-9959 Fax: 1(800) 737-7018 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Europe Fax: (a49) 0-180-530 85 86 Email: cnjwge @ tevm2.nsc.com Deutsch Tel: (a49) 0-180-530 85 85 English Tel: (a49) 0-180-532 78 32 Fran3ais Tel: (a49) 0-180-532 93 58 Italiano Tel: (a49) 0-180-534 16 80 National Semiconductor Hong Kong Ltd. 13th Floor, Straight Block, Ocean Centre, 5 Canton Rd. Tsimshatsui, Kowloon Hong Kong Tel: (852) 2737-1600 Fax: (852) 2736-9960 National Semiconductor Japan Ltd. Tel: 81-043-299-2309 Fax: 81-043-299-2408 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications. IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI’s terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP® Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap Wireless Connectivity www.ti.com/wirelessconnectivity TI E2E Community Home Page www.ti.com/video e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright © 2011, Texas Instruments Incorporated