Relays RR Series RR Series — General Purpose Power Relays Key features of the RR series include: • High reliability and long service life • Available in octal (8- and 11-pin) or square (11-blade) base • Options include check button for test operation, indicator light, and side flange (contact IDEC for diodes) • DIN rail, surface and panel type sockets available for a wide range of mounting applications Specifications Relays E E-18 Contact Material Silver Contact Resistance 30mΩ maximum (initial value) Minimum Applicable Load 24V DC/10mA, 5V DC/20mA (reference value) Operating Time 25ms maximum Release Time 25ms maximum UL Recognized File No. E66043 Maximum Continuous Applied Voltage (AC/ DC) at 20°C 110% of the rated voltage Minimum Operating Voltage (AC/DC) at 20°C 80% of the rated voltage Drop-Out Voltage (AC) at 20°C 30% of the rated voltage Drop-Out Voltage (DC) at 20°C 15% of the rated voltage Power Consumption AC: approximately 3VA (50Hz), 2.5VA (60Hz) DC: approximately 1.5W Insulation Resistance 100MΩ minimum (measured with 500V DC megger) * File No. B020813332452* * Pin Style Only (does not apply to blade style) Pin (RR2P, RR3PA) Between live and dead parts: 1,500V AC, 1 minute Between contact circuit and operating coil: 1,500V AC, 1 minute Between contact circuits: 1,500V AC, 1 minute (1,000V AC between NO-NC contacts) Dielectric Strength Blade (RR1BA, RR2BA, RR3B) Between live and dead parts: 2,000V AC, 1 minute Between contact circuit and operating coil: 2,000V AC, 1 minute Between contact circuits: 2,000V AC, 1 minute Between contacts of same polarity: 1,000V AC, 1 minute Frequency Response 1,800 operations/hour Temperature Rise Coil: 85°C maximum Contact: 65°C maximum Vibration Resistance 0 to 6G (55Hz maximum) Shock Resistance 100N (approximately 10G) Life Expectancy Electrical: over 500,000 operations (120V, 50/60Hz, 10A) Mechanical: over 10,000,000 operations Operating Temperature –30 to +70°C Weight RR2P: 90g, RR3PA: 96g (approximately) RR1BA/RR2BA/RR3B: 82g (approximately) www.idec.com CSA Certified File No. LR35144 * Pin Style Only Ordering Information Order standard voltages for fastest delivery. Allow extra delivery time for non-standard voltages. Basic Part No. Coil Voltage: RR3PA-U AC120V USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Relays RR Series Part Numbers Part Numbers: RR Series with Options Termination Contact Configuration Basic Part No. Indicator Light P, PA (pin) DPDT RR2P-U RR2P-UL RR2P-UC RR2P-ULC — 3PDT RR3PA-U RR3PA-UL RR3PA-UC RR3PA-ULC — SPDT RR1BA-U RR1BA-UL RR1BA-UC RR1BA-ULC RR1BA-US DPDT RR2BA-U RR2BA-UL RR2BA-UC RR2BA-ULC RR2BA-US 3PDT RR3B-U RR3B-UL RR3B-UC RR3B-ULC RR3B-US B, BA (blade) Check Button Light and Check Button Side Flange 1. RR1BA, RR2BA, and RR3PA are U.S. standard terminal arrangements. 2. For diode option on DC coils please consult factory. Ratings Coil Ratings AC DC Rated Current ±15% at 20°C Coil Resistance ±10% at 20°C Inrush Current 60Hz 50Hz 6V 420mA 490mA 4.9Ω 12V 210mA 245mA E Inductance Energizing De-Energizing 720mA 0.04H 0.02H 18Ω 365mA 0.15H 0.08H 24V 105mA 121mA 79Ω 182mA 0.57H 0.32H 120V 20.5mA 24mA 2100Ω 35mA 15H 8.2H 240V 10.5mA 12.1mA 8330Ω 18mA 57H 32H 6V 240mA 25Ω 12V 120mA 100Ω 24V 60mA 400Ω 48V 30mA 1600Ω 110V 13mA 8460Ω Relays Rated Voltage N/A Contact Ratings Inductive Resistive Voltage Nominal UL CSA Nominal Motor Load UL CSA UL 30V DC 10A 10A 10A 7.5A 7A 7.5A — 110V DC 0.5A — — 0.3A — 0.5A — 120V AC 10A 10A 10A 7.5A 7.5A 7.5A 1/4 hp 240V AC 7.5A 10A 10A 5A 7A 7A 1/3 hp Inductive load: cos ø = 0.3, L/R = 7ms. Applicable Sockets Part Numbers: Sockets Relays RR2P RR3PA RR1BA RR2BA RR3B Standard DIN Finger-Safe DIN Rail Mount Rail Mount SR2P-05 SR2P-06 SR2P-05C SR3P-05 SR3P-06 SR3P-05C SR3B-05 — www.idec.com Panel Mount SR2P-51 SR3P-51 SR3B-51 Springs & Clips (optional) Part Numbers Use With Socket SR2B-02F1 SR2P-05, -05C, -06 SR3P-01F1 SR2P-51, SR3P-51 SR3B-02F1 SR3P-05, -05C, -06 SR3B-05, -51 SR3P-01F1 SR3P-51 SR3B-02F1 SR3B-05 SR3B-51 USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC See Section F for details on sockets. All DIN rail mount sockets listed can be mounted using DIN rail BNDN1000. E-19 Relays RR Series Internal Circuits 4 5 6 5 3 7 4 6 8 3 2 (-) 7 (+) 2 (-) 8 1 9 10 1 RR2P RR3PA 2 5 7 A (-) B (+) 1 4 7 3 6 9 1 4 7 A (-) B (+) A (-) RR1BA Relays E (+) 11 2 5 8 3 6 9 B (+) RR2BA RR3B Image as viewed from bottom of relay. Refer to socket for exact wiring layout (Section F). Electrical Life Curves AC 220V Resistive AC 110V Inductive 1000 500 Life (x 10,000) Operations Life (x 10,000) Operations AC 110V Resistive AC 220V Inductive 100 50 DC 30V Resistive 1000 DC 30V Inductive 500 100 DC 100V Resistive 50 DC 100V Inductive 10 10 0 1 2 3 4 5 6 7 8 0 9 10 1 Load Current (A) 2 3 4 5 6 7 8 9 10 Load Current (A) Maximum Switching Capacity 10.0 AC resistive AC inductive Load Current (A) 5.0 DC resistive 1.0 DC inductive 0.5 1 5 10 50 100 200 300 Load Voltage (V) E-20 www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC Relays RR Series Dimensions 8-Pin RR2P 11-Pin RR3PA Total length from panel surface including relay socket SR3P-05: 84.5 (87.5) max., SR3P-51: 63 (68) max. Total length from panel surface including relay socket SR2P-05: 84.5 (87.5) max., SR2P-51: 63 (68) max. 6 5 7 6 2 7 35.6 3 8 3 1 8 9 2 10 1 9.9 9.9 55.5 max. 28.6 55.5 max. 13 35.6 4 4 5 11 35.6 13 Dimensions in the ( ) include a hold-down spring. Dimensions in the ( ) include a hold-down spring. Blade RR1BA, RR2BA, RR3B Side Flange RR1BA-US, RR2BA-US, RR3B-US E 4.7 63.5 3.0 × ø2.0 oblong hole 7.3 11.1 4.2 11.1 63.5 47.5 max. 2 3 4 5 6 7 8 9 1 2 3 4 5 6 7 8 9 A A 36 1 0.5 73.5 36 0.5 16.1 4.7 3.0 × ø2.0 oblong hole Total length from panel surface including relay socket SR3B-05: 73 (76) max., SR3B-51: 56 (60) max. Relays 16.0 2-ø4.5 Mounting Holes B B 36 36 47.5 max. 7.3 Dimensions in the ( ) include a hold-down spring. Note: Dimensions in [ ] include hold-down spring. All dimensions in mm. www.idec.com USA: (800) 262-IDEC or (408) 747-0550, Canada: (888) 317-IDEC E-21