SPECIFICATION CONTROL DRAWING PART NAME PRODUCT REVISION B-041-24-N B-041-26-N B-041-28-N B-041-30-N D D D D A min 4.4 (0.175) PRODUCT DIMENSIONS B C L min min max 2.8 (0.110) 1.6 (0.060) CABLE DIMENSIONS E F (G±0.02) min 1.5 (0.060) TO 0.3 16 2.8 (0.110) (0.012) (0.630) D “GA” = WIRE GAUGE (AWG) K min 30 (1.180) 24 26 28 30 150 (5.900) (M±0.02) 1.7 (0.065) TO 6 4.4 (0.175) (0.235) MATERIAL 1. & 6. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. & 5. SOLDER PREFORMS WITH FLUX: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. 3., 4. & 7. MELTABLE RINGS: Thermally stabilized thermoplastic. 8. CONDUCTOR LEAD: AWG GA (see table). MIL-W-81822/13-GA-9. ETFE insulated silver plated solid conductor. Color: white. 9. GROUND LEAD: MIL-W-81822/13-GA-G. ETFE insulated, silverplated, solid conductor. Color: blue. GA= Gauge per table. APPLICATION A. The parts covered by this SCD are for use in terminating the primary conductor and the braided shield of a coaxial cable having tin or silverplated conductor and shield, rated for at least 125° C and meeting the dimensional requirements listed. B. Parts will meet the requirements of Raychem specification RT-1404 when installed per Raychem RPIP-500-03. For best results, prepare the cable as shown: Tyco Electronics Corporation 305 Constitution Drive Menlo Park, CA 94025, USA Raychem Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE IN BETWEEN BRACKETS. TOLERANCES: 0.00 N/A 0.0 N/A 0 N/A DRAWN BY: ANGLES: N/A R. MAPALO DOCUMENT NO: Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. ROUGHNESS IN MICRON REPLACES: B021XYN DCR NUMBER: D981933 COAXIAL SOLDERSLEEVE* DEVICE WITH PRE-INSTALLED LEAD SOLID WIRES DATE: DOC ISSUE: 3 Nov. 23, 1998 PROD. REV. SEE TABLE If this document is printed it becomes uncontrolled. Check for the latest revision. B-041-GA-N SCALE: NONE SIZE: A SHEET: 1 of 1