P/N 0345-E00-C7201N 0345-E00-C7201NU 3. FINISH SPECIFICATIONS: BODY: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS). CENTER CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS). OUTER CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS). FERRULE: .000050 MIN NICKEL PER AMS-QQ-N-290 OVER .000050 MIN COPPER FLASH PER ASTM B734 (RoHS). DESCRIPTION E REVISED PER ECR-ER28303 DESCRIPTION SINGLE PACK BULK PACK CTC 2. MATERIAL SPECIFICATIONS: BODY: BRASS PER ASTM B16. CENTER CONTACT: COPPER ALLOY. OUTER CONTACT: COPPER ALLOY. INSULATOR: TEFLON PER ASTM D1710. FERRULE: BRONZE C22000. BY APPD DATE REV CY 11/03/10 NOTES: UNLESS OTHERWISE SPECIFIED 1. DESIGNED FOR USE WITH BELDEN 1855A OR EQUIVALENT CABLE. QTY 1 400 4. STRIP USE KINGS KTS-8-2. 5. CRIMP FERRULE USE KINGS KTH-1000 & KTH-2025(.178 HEX). 6. INTERFACE PER CECC 22230. 7. CAP-E02. 8. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS. FREQUENCY RANGE: DC-6.0 GHz. RETURN LOSS: <-20dB UP TO 3.0 GHz, <-15dB UP TO 6.0 GHz. 9. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD. .215 5.46 .184 4.67 .315 8.00 .105 2.67 .500 12.70 .462 11.73 TO TIP OF CABLE INNER CONDUCTOR 1.287 [32.69] WHEN ASSEMBLED .624 15.85 CATALOG P/N: 0345-E00-C7201N .312 7.92 .155 3.94 .005 MIN CHAMFER PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 4:1 Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING RECOMMENDED CABLE TRIM DIMENSIONS DRAWN DW APPROVED XXX DATE APPROVED 05/22/08 DCam DATE APPROVED XX/XX/XX XXX DATE 05/28/08 DATE XX/XX/XX DIN 1.0/2.3 75 OHM PLUG FOR BELDEN 1855A CABLE (RoHS COMPLIANT) A SD0345-E00-C7201N SHT 1 OF 1 REV E