DESCRIPTION C REVISED PER ER7306 BY APPD DATE CWB 2. MATERIAL SPECIFICATIONS: BRASS (B05) PER UNS53800 REV CWB 04/11/08 NOTES: UNLESS OTHERWISE SPECIFIED 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000. 3. FINISH SPECIFICATIONS: BODY: .000030 MIN GOLD PER ASTM B488 OVER .000050 MIN NICKEL PER AMS-QQ-N-290 4. ELECTRICAL SPECIFICATIONS: CURRENT RATING: 30 AMPS 5. FOR USE WITH 10 GA. OR EQUIVALENT WIRE. 6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE. .218 5.54 ACROSS FLATS .356 9.04 .186 4.72 ACCEPTS .144 3.66 PIN .275 6.99 .146±.003 3.71±.08 .271 6.88 CATALOG P/N: 01362 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 8:1 RECOMMENDED CABLE TRIM DIMENSIONS SCALE: 4:1 WinchesterElectronics Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER DRAWING DRAWN JEM APPROVED JED DATE APPROVED 10/15/03 CWB DATE APPROVED 10/15/03 SD DATE 10/15/03 DATE 10/15/03 POWERSNAP, RIGHT ANGLE SOLDER MOUNT 10 AWG, 30 AMP A SD01362 SHT 1 OF 1 REV C