SD01447G - Layout1 - Winchester Electronics

DESCRIPTION
B
REVISED PER
ER7306
2. MATERIAL SPECIFICATIONS: BRASS PER ASTM B16.
BY APPD
DATE
CWB
REV
CWB
04/11/08
NOTES: UNLESS OTHERWISE SPECIFIED
1. FOR GENERAL SERIES SPECIFICATIONS, SEE SD74-0000.
3. FINISH SPECIFICATIONS:
.000030 MIN. GOLD PER ASTM B488 OVER .000050 MIN. NICKEL PER AMS QQ-N-290.
4. ELECTRICAL SPECIFICATIONS:
CURRENT RATING: 8 AMPS
5. FOR USE WITH 20 GA WIRE OR EQUIVALENT.
6. REFER TO CAP10-01 FOR CABLE ASSEMBLY PROCEDURE.
.167 4.24
.144 3.66
.275 6.99
+.010
+.25
.00
.218 - .000 5.54
.144±.001 3.66±.03
ACROSS FLATS
.047±.003 1.19±.08
CATALOG P/N: 01447G
.120 3.05
20 AWG OR
EQUIVILENT
RECOMMENDED CABLE TRIM DIMENSION
SCALE: 6:1
PER ASME Y14.5M-1994
UNLESS OTHERWISE SPECIFIED:
DIMENSIONS ARE IN INCHES [MM]
TOLERANCES:
DECIMAL: .XX ± .01 [0.3]
.XXX ± .005 [0.13]
.XXXX ± .XXXX
ANGLES: ± 2°
SCALE: 8:1
WinchesterElectronics
Winchester Electronics Corporation
62 Barnes Industrial Road North
Wallingford, Connecticut 06492
CUSTOMER
DRAWING
DRAWN
PSM
APPROVED
XXX
DATE APPROVED
06/18/07 WPM
DATE APPROVED
XX/XX/XX
JC
DATE
06/18/07
DATE
06/18/07
POWERSNAP,
RIGHT ANGLE SOLDER MOUNT
20 AW, 8 AMP
A
SD01447G
SHT
1 OF 1
REV
B