QBH-5729 Compliance Matrix Broadband Amplifier Specifications Typical 25ºC Guaranteed -55ºC to +85ºC Item # A.1 Parameter Frequency Range Unit MHz A.2 Small Signal Gain dB 17.5 15.5 dB min. Comply A.3 Gain Flatness dB ± 0.3 ± 1.0 Comply A.4 Input VSWR ― 1.6 :1 2.1 :1 max. Comply A.5 Output VSWR ― 1.6 :1 2.1 :1 max. Comply A.6 Reverse Isolation dB 38 35 min. Comply A.7 Noise Figure dB 4.8 6.0 max. Comply A.8 Pout @ 1dB Compression A.9 1000 – 6000 Comments Comply dBm +20 +18.5 min. Comply rd dBm +30 ― Comply nd +53 ― Comply 3 Order Output Intercept Point A.10 2 Order Output Intercept Point dBm A.11 DC Voltage Vdc A.12 Operating DC Current mA +15.0 135 Note 1 145 max. Comply Notes: 1) 2) All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of ±1%. RF output terminated into 50 ohms (Load VSWR ≤ 2.0 :1). B. Absolute Maximum Ratings Item # B.1 Parameter DC Voltage @ 25°C Limit Max. Unit Vdc Specification +16.0 Comments Comply B.2 RF Input Power @ 25°C Max. dBm +13.0 Note 2 B.3 Operating Temperature* Min. ºC - 55 Max. ºC +90 B.4 Storage Temperature Min. ºC - 62 Max. ºC +125 Comply Comply * Maximum Operating Temperature is defined as that temperature which, if exceeded for extended periods, could result in premature unit failure. This data is provided for user reliability information. This may or may not represent the maximum temperature for electrical parameter specifications. C. General Item # C.1 C.2 Parameter Package Specification SM3 (PN: 080-10116-0001) Comments Comply Gold Plated Kovar Comply Finish Revision A ECN -MCG