BP2500D0805BT BAND PASS FILTER SPECIFICATION Rev. A PRODUCT FEATURES 1. Surface mount band pass filter with a small size of 2.0 X 1.2 X 0.4 mm, RoHS compliant. 2. Provide low insertion loss, high rejection rate, and low profile thickness. 3. Highly stable under temperature and humidity changes. RF CHARACTERISTICS PHYSICAL DIMENSIONS P/N BP2500D0805BT Specification Frequency range 2400 - 2500 MHz Insertion Loss (max) 2.5 dB max VSWR 2.0 max Impedance 50 Ω Attenuation (min.) 30 dB @ 824 - 849 MHz 30 dB @ 880 - 915 MHz 30 dB @ 1545 - 1605 MHz 30 dB @ 1565 - 1585 MHz 35 dB @ 1710 - 1785 MHz 40 dB @ 1850 - 1910 MHz 32 dB @ 1920 - 1980 MHz Symbol Dimension (mm) L 2.00 ± 0.15 W 1.25 ± 0.10 3168 - 4752 MHz T 0.45 ± 0.10 11 dB @ 3300 - 3800 MHz A 0.95 ± 0.10 35 dB @ 4800 - 4967 MHz B 0.275 ± 0.10 26 dB @ 5150 - 6000 MHz C 0.25 ± 0.10 23 dB @ 7200 - 7450 MHz -40°C to +85°C D 0.60 ± 0.10 E 0.175 ± 0.10 F 0.15 ± 0.10 7 dB @ Operating temperature range TERMINAL CONFIGURATION P2 P3 PIN Definition P1 INPUT P2 GND P3 OUTPUT P1 Frontier Electronics Corp.® http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 BP2500D0805BT BAND PASS FILTER SPECIFICATION Rev. A PCB DESIGN/LAYOUT CONSIDERATION Figure Symbol Dimension (mm) L1 0.60 ± 0.10 W1 0.70 ± 0.05 W2 2.25 ± 0.10 D1 0.20 ± 0.05 S1 0.25 ± 0.05 Note: - Design trace width to be 50Ω impedance. Typical RF Performance Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989